Koozali.org: home of the SME Server

Obsolete Releases => SME 7.x Contribs => Topic started by: jjcuk on April 22, 2008, 10:43:24 AM

Title: dar2
Post by: jjcuk on April 22, 2008, 10:43:24 AM

just trying to install dar2 as per wiki and getting

 yum install smeserver-dar2 --enablerepo=smecontribs
==============================================================
WARNING: Additional commands may be required after running yum
==============================================================


Error getting repository data for smecontribs, repository not found

regards
Jim

Title: Re: dar2
Post by: stephen noble on April 22, 2008, 02:31:26 PM

works now
+ try to make the header a little more descriptive

Dependencies Resolved

=============================================================================
 Package                 Arch       Version          Repository        Size
=============================================================================
Updating:
 smeserver-dar2          noarch     0.0.1-6.el4.sme  smecontribs        40 k

Title: Re: dar2
Post by: jjcuk on April 22, 2008, 03:28:12 PM

thanks

regards
Jim

Title: Re: dar2
Post by: jjcuk on April 22, 2008, 03:31:13 PM

ok just tried again

#  yum install smeserver-dar2 --enablerepo=smecontribs
==============================================================
WARNING: Additional commands may be required after running yum
==============================================================


Error getting repository data for smecontribs, repository not found

is it be something I am doing wrong then ?

Title: Re: dar2
Post by: Marco Hess on April 22, 2008, 03:56:11 PM

Check if your repository is actually set:

Code: [Select]

db yum_repositories show smecontribs
it should output something like:

Code: [Select]

smecontribs=repository
    BaseURL=http://mirror.contribs.org/pub/smeserver/releases/7/smecontribs/$basearch
    EnableGroups=yes
    GPGCheck=yes
    MirrorList=file:///etc/yum.repos.d/mirrors-smecontribs
    Name=SME Server - contribs
    Visible=no
    status=disabled

Otherwise check out:

http://wiki.contribs.org/Adding_Software#Restoring_Default_Yum_Repositories

Marco

Title: Re: dar2
Post by: jjcuk on April 23, 2008, 01:06:51 AM

now getting this

# yum install smeserver-dar2 --enablerepo=smecontribs
==============================================================
WARNING: Additional commands may be required after running yum
==============================================================
Loading "smeserver" plugin
Loading "fastestmirror" plugin
Loading "installonlyn" plugin
Setting up Install Process
Setting up repositories
smecontribs               100% |=========================|  951 B    00:00
smeaddons                 100% |=========================|  951 B    00:00
not using ftp, http, or file for repos, skipping - 5 is not a valid release o                                           r hasnt been released yet
Error: Cannot find a valid baseurl for repo: updates
================================================================
No new rpms were installed. No additional commands are required.
================================================================

Title: Re: dar2
Post by: stephen noble on April 23, 2008, 02:31:17 AM

Quote from: jjcuk on April 23, 2008, 01:06:51 AM

now getting this

not using ftp, http, or file for repos, skipping - 5 is not a valid release or hasnt been released yet
Error: Cannot find a valid baseurl for repo: updates

This is a SME 8 bug
contribs are not supported on sme 8

http://wiki.contribs.org/SME_Server_8#Considerations_before_installing

but remember the unsorted server-manager is just cosmetic

Title: Re: dar2
Post by: jjcuk on April 23, 2008, 01:33:43 PM

yes thanks snoble

the last post was in error I had 2 putty windows opened and accidentally pasted from the sme 8beta one.

the initial problem stemmed from running the command
 "# yum install smeserver-dar2 --enablerepo=smecontribs "
from a sme 7.0 install, after upgrading to 7.3 the issue has been resolved.

thanks all
regards
Jim

Title: Re: dar2
Post by: jjcuk on April 23, 2008, 03:09:37 PM

Ok finally got dar-2 installed,stock sme 7.3 with all updates and I am attempting my first recovery I can do backups as I see them appearing in my windows share
however cant seem to do a recovery
I am entering
Date 2008.04.20 (my backup file)
Disaster Recovery [ Enabled ] Restore [ *.* ] Restore to [ / ]

click perform and I get
Operation status report
SUCCESS

this happens far to fast, the backup file is 433,590k

I then enter the server-manager Reboot or shutdown panel and Reconfigure my server

however nothing seems to be restored ?

# yum info installed smeserver-dar2 shows
==============================================================
WARNING: Additional commands may be required after running yum
==============================================================
Loading "installonlyn" plugin
Loading "smeserver" plugin
Loading "fastestmirror" plugin
Installed Packages
Name   : smeserver-dar2
Arch   : noarch
Version: 0.0.1
Release: 7.el4.sme
Size   : 179 k
Repo   : installed
Summary: Disk ARchive for SME Server

Description:
 SME Server implementation of Disk ARchive (http://dar.linux.free.fr)
based on smeserver-backup2.


regards
Jim

Title: Re: dar2
Post by: stephen noble on April 23, 2008, 04:37:18 PM

I'm not a dar user, sorry

find out what you can and raise and bug