Koozali.org: home of the SME Server

Obsolete Releases => SME Server 7.x => Topic started by: wurzel on April 29, 2008, 10:46:35 PM

Title: new sme-server 7.3 - no update possible
Post by: wurzel on April 29, 2008, 10:46:35 PM

i Installed a brand-new sme-Server without any contribs.
Updating failed with the following error-messages:

Quote

xorg-x11-libs           i386       6.8.2-1.EL.33.0.2  updates           2.7 M
Installing for dependencies:
 aspell-da               i386       50:0.50-12.2.2.el4.sme  smeupdates        4.1 M
 aspell-el               i386       50:0.50-4.2.2.el4.sme  smeupdates        4.5 M
 aspell-id               i386       50:0.50.1-4.2.2.el4.sme  smeupdates        168 k
 aspell-nl               i386       51:0.1e-1.el4.sme  smeupdates        1.8 M
 aspell-pt               i386       50:0.50-10.2.2.el4.sme  smeupdates        3.0 M
 aspell-sl               i386       50:0.50-1.2.1.el4http://ftp.surfnet.nl/ftp/pub/os/Linux/distr/smeserver/releases/7/smeupdates/i386/RPMS/e-smith-backup-1.14.0-22.el4.sme.noarch.rpm: [Errno -1] Package does not match checksum
Trying other mirror.
http://smemirror.fullnet.co.uk/releases/7/smeupdates/i386/RPMS/e-smith-backup-1.14.0-22.el4.sme.noarch.rpm: [Errno 9] Requested Range Not Satisfiable
Trying other mirror.
http://distro.ibiblio.org/pub/linux/distributions/smeserver/releases/7/smeupdates/i386/RPMS/e-smith-backup-1.14.0-22.el4.sme.noarch.rpm: [Errno 9] Requested Range Not Satisfiable
Trying other mirror.
http://sme-mirror.voxteneo.com/releases/7/smeupdates/i386/RPMS/e-smith-backup-1.14.0-22.el4.sme.noarch.rpm: [Errno 9] Requested Range Not Satisfiable
Trying other mirror.
http://ftp.nluug.nl/os/Linux/distr/smeserver/releases/7/smeupdates/i386/RPMS/e-smith-backup-1.14.0-22.el4.sme.noarch.rpm: [Errno 9] Requested Range Not Satisfiable
Trying other mirror.
http://mirror.pacific.net.au/linux/smeserver/releases/7/smeupdates/i386/RPMS/e-smith-backup-1.14.0-22.el4.sme.noarch.rpm: [Errno 9] Requested Range Not Satisfiable
Trying other mirror.


Error Downloading Packages:
  e-smith-backup - 1.14.0-22.el4.sme.noarch: failure: RPMS/e-smith-backup-1.14.0-22.el4.sme.noarch.rpm from smeupdates: [Errno 256] No more mirrors to try.
.sme  smeupdates        7.3 M
 perl-Net-SMTP-SSL       noarch     1.01-1.el4.sme   smeupdates        6.9 k
 smeserver-locale-da     noarch     1.4.0-8.el4.sme  smeupdates         67 k
 smeserver-locale-el     noarch     1.4.0-8.el4.sme  smeupdates         61 k
 smeserver-locale-hu     noarch     1.4.0-8.el4.sme  smeupdates         66 k
 smeserver-locale-id     noarch     1.4.0-8.el4.sme  smeupdates         67 k
 smeserver-locale-nl     noarch     1.4.0-8.el4.sme  smeupdates         69 k
 smeserver-locale-pt_BR  noarch     1.4.0-8.el4.sme  smeupdates         68 k
 smeserver-locale-sl     noarch     1.4.0-8.el4.sme  smeupdates         66 k
 yum-plugin-installonlyn  noarch     0.91-1.el4.sme   smeupdates         11 k

Transaction Summary
=============================================================================
Install     16 Package(s)         
Update     111 Package(s)         
Remove       0 Package(s)         
Total download size: 95 M
Downloading Packages:
yum update LPRng.i386 apr-util.i386 at.i386 atrpms.noarch cdrecord.i386 clamav-db.i386 clamav.i386 clamd.i386 cups-libs.i386 diffutils.i386 djbdns.i386 dstat.noarch e-smith-LPRng.noarch e-smith-backup.noarch e-smith-base.i386 e-smith-domains.noarch e-smith-email.noarch e-smith-formmagick.noarch e-smith-grub.noarch e-smith-horde.noarch e-smith-hosts.noarch e-smith-ibays.noarch e-smith-ldap.noarch e-smith-lib.noarch e-smith-manager.noarch e-smith-mysql.noarch e-smith-ntp.noarch e-smith-nutUPS.noarch e-smith-openssh.noarch e-smith-portforwarding.noarch e-smith-pptpd.noarch e-smith-proftpd.noarch e-smith-proxy.noarch e-smith-qmail.noarch e-smith-qmailanalog.noarch e-smith-quota.noarch e-smith-runit.noarch e-smith-samba.noarch e-smith-starterwebsite.noarch e-smith-turba.noarch e-smith-viewlogfiles.noarch e2fsprogs.i386 horde.noarch httpd-suexec.i386 httpd.i386 imp-h3.noarch ingo-h3.noarch isdn4k-utils.i386 kernel.i686 kmod-appletalk.i686 kmod-ppp.i686 kmod-slip.i686 krb5-libs.i386 libpcap.i386 libxml2-python.i386 libxml2.i386 lvm2.i386 maildrop.i386 mkisofs.i386 mod_ssl.i386 net-snmp-libs.i386 net-snmp-utils.i386 net-snmp.i386 netpbm-progs.i386 netpbm.i386 openldap-servers.i386 openldap.i386 perl-Archive-Tar.noarch perl-CGI-FormMagick.noarch perl-Crypt-Cracklib.i386 perl-DBI.i386 perl-Error.noarch perl-HTML-Tabulate.noarch perl-HTML-Tagset.noarch perl-IO-Socket-INET6.noarch perl-IO-Zlib.noarch perl-IP-Country.noarch perl-Mail-DKIM.noarch perl-Net-DNS.i386 perl-Object-Persistence.noarch perl-Quota.i386 perl-Socket6.i386 postgresql-libs.i386 pv.i386 qmail.i386 qpsmtpd.noarch quota.i386 rkhunter.noarch rsync.i386 sed.i386 setup.noarch smeserver-audittools.noarch smeserver-clamav.noarch smeserver-locale-de.noarch smeserver-locale-es.noarch smeserver-locale-fr.noarch smeserver-locale-it.noarch smeserver-locale-sv.noarch smeserver-qpsmtpd.noarch smeserver-spamassassin.noarch smeserver-support.noarch smeserver-yum.noarch smolt.noarch spamassassin.i386 squid.i386 sysklogd.i386 tcpdump.i386 turba-h3.noarch tzdata.noarch vixie-cron.i386 xorg-x11-Mesa-libGL.i386 xorg-x11-libs.i386 failed: 256

Nach Installation oder Löschen von Software muss das System neu konfiguriert werden. Danach ist ein Neustart erforderlich.

are there any hints on this behaviour auf my server?


Wurzel

Title: Re: new sme-server 7.3 - no update possible
Post by: cactus on April 30, 2008, 08:42:13 AM

Quote from: wurzel on April 29, 2008, 10:46:35 PM

are there any hints on this behaviour auf my server?

Did you already tried

Code: [Select]

yum clean all before trying the update again? If that fails lplease raise a bug as updates should work, certainly when you have a new clean install from CD.

Title: Re: new sme-server 7.3 - no update possible
Post by: gammelgard on April 30, 2008, 09:52:35 AM

Hi,
Since yesterday I have the same problem as you when i try to install a new SME Server 7.3.

/George

Title: Re: new sme-server 7.3 - no update possible
Post by: Beddhist on April 30, 2008, 12:58:01 PM

I had exactly the same problem here. By selecting only blocks of packages I was able to install all of them, except for backup.

http://bugs.contribs.org/show_bug.cgi?id=4296

Title: Re: new sme-server 7.3 - no update possible
Post by: gammelgard on May 01, 2008, 02:21:57 AM

I tried  with "yum clean all" and run after "yum update" but no changes for me ..same problem ;(

Since yesterday i tried to install five times. Last two times i also tried to update by selecting only blocks of packages but now i  get a nice server error.

Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, admin and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log.

I give up now!

/George

Title: Re: new sme-server 7.3 - no update possible
Post by: Beddhist on May 01, 2008, 10:08:54 AM

This seems to have been a mirror problem. The mirror is unavailable and the installation has now proceeded successfully.

However, since a problem with one mirror causes more problems with the others, I wonder whether this bug should stay open?

Comments, please.

I'm going to update the bug now accordingly, but will leave it open for now.

Title: Re: new sme-server 7.3 - no update possible
Post by: Beddhist on May 01, 2008, 11:16:26 AM

Well, I guess my question has just been answered, as somebody closed the bug.

However, I believe that still leaves the issue with one "faulty" mirror causing problems unresolved.

I think I'll leave that to those folks here who are used to how things are done around here. I'm a newbee.

Thanks for your time.
Peter.

Title: Re: new sme-server 7.3 - no update possible
Post by: cactus on May 01, 2008, 11:21:50 AM

Quote from: Beddhist on May 01, 2008, 11:16:26 AM

Well, I guess my question has just been answered, as somebody closed the bug.

However, I believe that still leaves the issue with one "faulty" mirror causing problems unresolved.

I did not close the bug, I marked it as resolved as issues seemed to be resolved judging from the comments in the bug. Judging from this (http://mirror.contribs.org/mirrors/ ) there are no errors anymore except one outdated mirror.

If you disagree please reopen the bug (or even better in this case open a new one specific to the mirror you are having issues with), as that is how things work around here. You are better of posting your comments to the bug rather than opening and/or commenting to a parallel thread and discussing things here as well.

People concerned with the care over services of contribs.org are reading the forums but do not have the time to read all threads. They however get notified of bug reports and added comments.

Title: Re: new sme-server 7.3 - no update possible
Post by: Beddhist on May 01, 2008, 04:21:14 PM

Thanks for the clarification.

As I had a problem with a different mirror than the one at the beginning of this thread I was going to open a new bug. It seems to me that the checksum error on one mirror causes

[Errno 9] Requested Range Not Satisfiable

on all subsequently tried mirrors, causing further updating to fail.

However, since it is working now I'm not sure whether to raise a bug for a problem that has essentially gone away, although I suspect it will come back for somebody else the next time there is such a problem with a mirror.

I appreciate all the time and effort you people put into this project.

Regards,
Peter.