Koozali.org: home of the SME Server

Obsolete Releases => SME 7.x Contribs => Topic started by: jaffer on June 03, 2008, 06:35:38 PM

Title: how to connect to hylafax server which client is suitable for hylafax
Post by: jaffer on June 03, 2008, 06:35:38 PM: i have installed hylafax server in sme server 7.3 but i am facing problem configuring client which client is suitable for hylafax server i have installed hermesfree but i got some error than i tried hylfaxclient but no connection error pls do help regarding fax client how to configure
Title: Re: how to connect to hylafax server which client is suitable for hylafax
Post by: Jáder on June 03, 2008, 09:30:08 PM: You could test WinPrintHylafax. It´s free and easy to configure.
If it do not work, search on Hylafax forums about how to configure or solve your problems.

BTW: Please read again your help request... it do not have any signal like "," or "." . This is not a Instant Messaging... it´s EMAIL.
When asking for help, please be polite and write in as good as possible palin english (this is not my 1st language too!).
Title: Re: how to connect to hylafax server which client is suitable for hylafax
Post by: yythoss on June 03, 2008, 09:38:14 PM: Look for this easy HylaFAX-Client

http://www.hylafax-client.de (http://www.hylafax-client.de)

yythoss
Title: Re: how to connect to hylafax server which client is suitable for hylafax
Post by: zatnikatel on June 04, 2008, 08:22:13 AM: Quote from: jaffer on June 03, 2008, 06:35:38 PM
i have installed hylafax server in sme server 7.3 but i am facing problem configuring client which client is suitable for hylafax server i have installed hermesfree but i got some error than i tried hylfaxclient but no connection error pls do help regarding fax client how to configure

the one i have used many time is whfc
http://whfc.uli-eckhardt.de/
Title: Re: how to connect to hylafax server which client is suitable for hylafax
Post by: Stefano on June 04, 2008, 09:01:38 AM: Quote from: jaffer on June 03, 2008, 06:35:38 PM
i have installed hylafax server in sme server 7.3 but i am facing problem configuring client which client is suitable for hylafax server i have installed hermesfree but i got some error than i tried hylfaxclient but no connection error pls do help regarding fax client how to configure

hi..

how did you install hylafax?
have you created users in hylafax with "faxadduser"?

BTW, this is IMO off topic in this forum as it is not an sme's issue

Ciao
Stefano
Title: Re: how to connect to hylafax server which client is suitable for hylafax
Post by: zatnikatel on June 04, 2008, 09:18:04 AM: Quote from: nenonano on June 04, 2008, 09:01:38 AM
hi..

how did you install hylafax?
have you created users in hylafax with "faxadduser"?

BTW, this is IMO off topic in this forum as it is not an sme's issue

Ciao
Stefano

yes faxadduser and don't forget to add modem in the setup as well it has been about a year since i have setup a hylafax server but you have to add the modem as well in the setup on hylafax server check what commport the modem is on before you run faxadd modem ttys0 or ttys1 go on to the hylafax site there is a as certain command to add the user and modem part is quite easy
Title: Re: how to connect to hylafax server which client is suitable for hylafax
Post by: yythoss on June 04, 2008, 09:24:21 AM: Take a look in the Wiki and you can find a contrib and a very good howto:

http://wiki.contribs.org/HylaFax (http://wiki.contribs.org/HylaFax)

yythoss
Title: Re: how to connect to hylafax server which client is suitable for hylafax
Post by: byte on June 04, 2008, 09:30:03 AM: Moving this topic to the SME 7.x contribs forum, it is more appropriate there. Thanks!