Koozali.org: home of the SME Server

Obsolete Releases => SME 7.x Contribs => Topic started by: Daniel B. on June 18, 2008, 06:19:50 PM

Title: [update] sme7admin, would need some testers
Post by: Daniel B. on June 18, 2008, 06:19:50 PM

Hi everyone.

I've just uploaded an updated release of sme7admin. It's just a maintenance release, mainly to make sme7admin compatible with the latest rrdtool (1.2). There'are also some fix, like the status of the services.
I'd like to have some feedback before I push it into smecontribs repo (I've tested on 4 servers without problem).
If you want to test it:

Code: [Select]

wget http://sme.firewall-services.com/downloads/sme7admin/rpms/smeserver-sme7admin-1.1.0-3.noarch.rpm
yum --enablerepo=smecontribs localinstall smeserver-sme7admin-1.1.0-3.noarch.rpm
/etc/init.d/mysql.init restart
/etc/init.d/sme7admind restart

Cheers, daniel

[edit] restart mysql.init and sme7admind after the install [/edit]

Title: Re: [update] sme7admin, would need some testers
Post by: imcintyre on June 18, 2008, 06:25:03 PM

Great news, I'll try tonight when I get home.

Title: Re: [update] sme7admin, would need some testers
Post by: mercyh on June 18, 2008, 06:45:42 PM

Hi,

Just tried to load it on my test server (old PC hardware) Base 7.3 install with all current updates. Install failed with the following message:

Code: [Select]

Processing Dependency: hddtemp for package: smeserver-sme7admin
--> Finished Dependency Resolution
Error: Missing Dependency: hddtemp is needed by package smeserver-sme7admin
Royce Holdeman

Title: Re: [update] sme7admin, would need some testers
Post by: Daniel B. on June 18, 2008, 06:51:25 PM

you need hddtemp to run sme7admin (it was the same for the older release). You can find one on dag repository http://dag.wieers.com/rpm/packages/hddtemp/hddtemp-0.3-0.beta15.1.el4.rf.i386.rpm or on our website (a bit older) http://sme.firewall-services.com/downloads/sme7admin/rpms/hddtemp-0.3-0.beta12.2.2.el4.rf.i386.rpm

Title: Re: [update] sme7admin, would need some testers
Post by: mercyh on June 18, 2008, 07:28:16 PM

VIP-ire,

I am off and running.

I have hit an error though.

Where do you want bug reports? (I can post the log here if you want, or open a report.)

Title: Re: [update] sme7admin, would need some testers
Post by: Daniel B. on June 18, 2008, 08:01:28 PM

You can open a bug report

Title: Re: [update] sme7admin, would need some testers
Post by: mercyh on June 18, 2008, 08:50:33 PM

Here is the bug. I may have just been too impatient. (My wife would tell you this is normal) I seem to know have data in sme7Admin.

http://bugs.contribs.org/show_bug.cgi?id=4415

Title: Re: [update] sme7admin, would need some testers
Post by: imcintyre on June 19, 2008, 02:12:41 AM

I have an sme server running vmware with 3 smeserver's installed on top in server only mode. I have updated it and installed sme7admin. It is working except for the hardware sensors. I will post anything new to the bug report as above.

Title: Re: [update] sme7admin, would need some testers
Post by: christian on June 30, 2008, 05:35:36 PM

looking good.

Has anyone found a more modern version of lm_sensors too? the one we have by default looks a little old (2.8.7) where as the current version is 3.02 and may work with my board.

Christian

Title: Re: [update] sme7admin, would need some testers
Post by: mercyh on June 30, 2008, 05:39:04 PM

VIP-ire,

All issues that I had have been resolved.

It may be ready for production..........

Thanks for the update,

Royce Holdeman
mercyh

Title: Re: [update] sme7admin, would need some testers
Post by: Daniel B. on June 30, 2008, 07:46:23 PM

Thanks for the feedback. A new release is ready with some minor bugs corrections:

http://sme.firewall-services.com/downloads/sme7admin/rpms/smeserver-sme7admin-1.1.0-4.noarch.rpm

It should be soon available in smecontribs repository.

Cheers.

Title: Re: [update] sme7admin, would need some testers
Post by: bunkobugsy on July 01, 2008, 03:42:59 AM

Great job! Been waiting for this for quite while....

Thanks again.

Title: Re: [update] sme7admin, would need some testers
Post by: Appesteijn on July 01, 2008, 08:05:55 AM

Hi I just installed 1.1.0.4 over my old instal 1.1.0.1 but now I dont get any e-mails. This is the log:

Locale:en_US
MailDomainsMatch = *******.***
readConf() OK !
DBI connect('','',...) failed: Access denied for user 'root'@'localhost' (using password: YES) at /usr/bin/sme7admind line 264
MYSQL error Access denied for user 'root'@'localhost' (using password: YES)
Can't call method "prepare" on an undefined value at /usr/bin/sme7admind line 771.

I didn't change my mysql password. Any idea's how to fix this?

Title: Re: [update] sme7admin, would need some testers
Post by: Daniel B. on July 01, 2008, 08:59:11 AM

Please, open a bug report (put my adress in CC: daniel AT firewall-services DOT com) and explain exactly how you have upgraded (rpm, yum? any error after the install ...)