Koozali.org: home of the SME Server
Obsolete Releases => SME 7.x Contribs => Topic started by: jaffer on June 30, 2008, 04:35:31 PM
-
thnks for reply yes i connected already my 3 com us robotic in my new pc with intel mother 945gcnl with inter core 2 duo processor but the modem is not get installed, when i worked with old pc i mean pentium 4 it is working fine i have doubt it is not supporting to new motherboard. In my new motherboard i have built in network card and modem but it is not working than i connect old network d-link 538x card than it started working with network than after i tried on modem with old modem 3 com us robotic external but i get error in hylafax
here you can view which i get eroor message
[root@linux-server ~]# faxsetup
Setup program for HylaFAX (tm) 4.3.4.
Created for i686-pc-linux-gnu on Fri May 18 11:37:47 EDT 2007.
Reading cached parameters from /var/spool/hylafax/etc/setup.cache.
Found base64 encoder: /usr/bin/uuencode -m ==== | /bin/grep -v ====
Found Quoted-Printable encoder: qp-encode
Found mimencode for compatibilty: mimencode
Checking system for proper client configuration.
Checking system for proper server configuration.
Warning: /sbin/mgetty does not exist or is not an executable program!
The file:
/sbin/mgetty
does not exist or this file is not an executable program. The
HylaFAX software optionally uses this program and the fact that
it does not exist on the system is not a fatal error. If the
program resides in a different location and you do not want to
install a symbolic link for /sbin/mgetty that points to your program
then you must reconfigure and rebuild HylaFAX from source code.
Warning: /sbin/vgetty does not exist or is not an executable program!
The file:
/sbin/vgetty
does not exist or this file is not an executable program. The
HylaFAX software optionally uses this program and the fact that
it does not exist on the system is not a fatal error. If the
program resides in a different location and you do not want to
install a symbolic link for /sbin/vgetty that points to your program
then you must reconfigure and rebuild HylaFAX from source code.
Warning: /bin/egetty does not exist or is not an executable program!
The file:
/bin/egetty
does not exist or this file is not an executable program. The
HylaFAX software optionally uses this program and the fact that
it does not exist on the system is not a fatal error. If the
program resides in a different location and you do not want to
install a symbolic link for /bin/egetty that points to your program
then you must reconfigure and rebuild HylaFAX from source code.
Warning: /usr/share/ghostscript/fonts does not exist or is not a directory!
The directory /usr/share/ghostscript/fonts does not exist or this file is not a directory.
This is the directory where the HylaFAX client applications expect to
locate font metric information to use in formatting ASCII text for
submission as facsimile. Without this information HylaFAX may generate
illegible facsimile from ASCII text.
Make /var/spool/hylafax/bin/ps2fax a link to /var/spool/hylafax/bin/ps2fax.gs.
Make /var/spool/hylafax/bin/pdf2fax a link to /var/spool/hylafax/bin/pdf2fax.gs.
Update /var/spool/hylafax/status/any.info.
HylaFAX configuration parameters are:
[1] Init script starts faxq: yes
[2] Init script starts hfaxd yes
[3] Start old protocol: no
[4] Start paging protocol: no
Are these ok [yes]?
-
jaffer..
PLEASE, stop posting and posting and posting.. try to follow up on a single 3ad..
how did you install hylafax?
have you followed the how-to?
which rpm did you install?
Ciao
Stefano