Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: Free_one on April 29, 2002, 03:42:26 PM

Title: Using outgoing IP adres!!!! Please HELP!
Post by: Free_one on April 29, 2002, 03:42:26 PM

The server is in server an gatawey mode and using statistik IP. this statistik ip diferent from global ip adres and I have to specify that vhen server resolves, gets information it comes from global ip to statistik ip. How can I do it?

Title: Re: Using outgoing IP adres!!!! Please HELP!
Post by: Bobby on April 29, 2002, 03:53:42 PM

Sorry, don't understand what you are asking.

Title: Re: Using outgoing IP adres!!!! Please HELP!
Post by: Free_one on April 29, 2002, 04:03:55 PM

Situation is, server is using statistik ip adres mode. what is diferent from global ip adres and vhen someone sends something to server on global ip it dosnt comes because server dont know it and vhat I have to do is to tell him to use both of them. I know it is with r0 - inkoming ang outgoing r1 or thomething. What to do???

Title: Re: Using outgoing IP adres!!!! Please HELP!
Post by: Bobby on April 29, 2002, 04:06:55 PM

What are you calling a global IP?

The static IP is from your ISP, and can be seen by the outside world, yes?

Title: Re: Using outgoing IP adres!!!! Please HELP!
Post by: Free_one on April 29, 2002, 04:12:20 PM

Statistik ip is that what gived by anather company who provides internet to us, and they are using three roter mode thats meen that outgoing and incoming ip is anather and I have to tell to server to akcept this ip too, like when outgoing use the statistik ip to global ip and when receiving from global ip to statistik!!!!

Title: Re: Using outgoing IP adres!!!! Please HELP!
Post by: Bobby on April 29, 2002, 04:16:19 PM

Is it like this?

Internet --> Global IP --> your static IP

Your static IP --> Global IP --> Internet

The static IP is a private subnet not seen by Internet?

Title: Re: Using outgoing IP adres!!!! Please HELP!
Post by: Free_one on April 29, 2002, 04:19:18 PM

yes!
And I dont know how to tel to the server to sed this information thro this model!

Title: Re: Using outgoing IP adres!!!! Please HELP!
Post by: Bobby on April 29, 2002, 04:21:25 PM

Okay, if you have a static IP address assigned to you by the ISP give that to the public network card.  Make that global IP address (the one the Internet can see) the gateway address in the e-smith configuration.

Title: Re: Using outgoing IP adres!!!! Please HELP!
Post by: Free_one on April 29, 2002, 04:25:33 PM

Thanks.
Bu how to do it in root mode??
Sorry I am just learning

Title: Re: Using outgoing IP adres!!!! Please HELP!
Post by: Bobby on April 29, 2002, 04:27:14 PM

Use the admin screen.  Log in as admin and select the 'configure server' option.

Title: Re: Using outgoing IP adres!!!! Please HELP!
Post by: Free_one on April 29, 2002, 04:30:30 PM

You say that in configuration I only have to give the public ip adres like getewey adres?

Title: Re: Using outgoing IP adres!!!! Please HELP!
Post by: Bobby on April 29, 2002, 04:33:02 PM

Should be, yes.  Put in the static as the public address and what you call the global as the gateway address.

Give it a go and see what happens.

Title: Re: Using outgoing IP adres!!!! Please HELP!
Post by: Free_one on April 29, 2002, 04:37:12 PM

Thanks you I will tray it out!

Someone sead that I have to configure it in root mode by r0 an r1


Thank you Boby very much !

Title: Re: Using outgoing IP adres!!!! Please HELP!
Post by: Bobby on April 29, 2002, 04:38:38 PM

Let me know if it solves your problem.

Title: Re: Using outgoing IP adres!!!! Please HELP!
Post by: Free_one on April 29, 2002, 04:40:32 PM

ok!