Koozali.org: home of the SME Server
Legacy Forums => General Discussion (Legacy) => Topic started by: CuriousGuy on May 06, 2002, 12:38:41 PM
-
Hi All
I have a SME server set up with ISDN support. The problem I am experiencing is that it seems to dial up every couple of minutes , even though it is configured to only dial up every 30 minutes. The following section of the log seems to indicate a DNS query triggering the dial up.
>>diald[1034]: Trigger: udp 10.1.1.50/61710 196.38.110.1/53 <<
Has anyone encountered a similar problem ? If so, how do I disable any DNS queries as a trigger for dial up without breaking anything else ?
-
Hi,
Quick 30 second reply:
Disconnect SME from your network: 99.99% sure it won't dial now.
Your problem: someone one your network is dialing out.
Suspect: spyware:
Go look at www.lavasoft.nu and clean all your systems.
You might even find some of Bill Gates goodies that are calling home!
good luck