Koozali.org: home of the SME Server
Obsolete Releases => SME Server 7.x => Topic started by: garyb43 on September 07, 2008, 08:39:07 PM
-
This particular issue is with 7.3 and the latest revisions via yum update. I am trying to send email via ISP's server. I have reviewed bug# 897 and applied that advice. I am receiving 535 Authentication failure from ISP's server. I can successfully send mail directly from Thunderbird to the same server on port 465 using the same userid/password that I have entered via the server-manager to e-mail settings.
Here is a piece of my smtp-auth-proxy log with debug enabled:
2008-09-07 12:02:57.104746500 Net::SMTP::SSL>>> Net::SMTP::SSL(1.01)
2008-09-07 12:02:57.104756500 Net::SMTP::SSL>>> IO::Socket::SSL(1.07)
2008-09-07 12:02:57.104761500 Net::SMTP::SSL>>> IO::Socket::INET(1.27)
2008-09-07 12:02:57.104767500 Net::SMTP::SSL>>> IO::Socket(1.28)
2008-09-07 12:02:57.104772500 Net::SMTP::SSL>>> IO::Handle(1.24)
2008-09-07 12:02:57.104777500 Net::SMTP::SSL>>> Exporter(5.58)
2008-09-07 12:02:57.104782500 Net::SMTP::SSL>>> Net::Cmd(2.26)
2008-09-07 12:02:57.118666500 Net::SMTP::SSL=GLOB(0x9002228)<<< 220 isp.att.net- Maillennium ESMTP/MULTIBOX/TLS frfwmhc01 #2
2008-09-07 12:02:57.118708500 Net::SMTP::SSL=GLOB(0x9002228)>>> EHLO pylon2.xmlprogress.com
2008-09-07 12:02:57.207714500 Net::SMTP::SSL=GLOB(0x9002228)<<< 250-isp.att.net
2008-09-07 12:02:57.207723500 Net::SMTP::SSL=GLOB(0x9002228)<<< 250-7BIT
2008-09-07 12:02:57.207729500 Net::SMTP::SSL=GLOB(0x9002228)<<< 250-8BITMIME
2008-09-07 12:02:57.207734500 Net::SMTP::SSL=GLOB(0x9002228)<<< 250-AUTH ANONYMOUS CRAM-MD5 LOGIN NTLM PLAIN
2008-09-07 12:02:57.207741500 Net::SMTP::SSL=GLOB(0x9002228)<<< 250-DSN
2008-09-07 12:02:57.207746500 Net::SMTP::SSL=GLOB(0x9002228)<<< 250-HELP
2008-09-07 12:02:57.207751500 Net::SMTP::SSL=GLOB(0x9002228)<<< 250-NOOP
2008-09-07 12:02:57.207812500 Net::SMTP::SSL=GLOB(0x9002228)<<< 250-PIPELINING
2008-09-07 12:02:57.212722500 Net::SMTP::SSL=GLOB(0x9002228)<<< 250-SIZE 26214400
2008-09-07 12:02:57.212732500 Net::SMTP::SSL=GLOB(0x9002228)<<< 250-STARTTLS
2008-09-07 12:02:57.212737500 Net::SMTP::SSL=GLOB(0x9002228)<<< 250-VERS V05.21c++
2008-09-07 12:02:57.212743500 Net::SMTP::SSL=GLOB(0x9002228)<<< 250 XMVP 2
2008-09-07 12:02:57.296280500 Net::SMTP::SSL=GLOB(0x9002228)>>> AUTH CRAM-MD5
2008-09-07 12:02:57.377277500 Net::SMTP::SSL=GLOB(0x9002228)<<< 334 PDMwMzQuMTIyMDgwMzM3NkBpc3AuYXR0Lm5ldD4=
2008-09-07 12:02:57.379530500 Net::SMTP::SSL=GLOB(0x9002228)>>> Z2FyeWI0M0BhdHQubmV0IGYyOGM2NGI0ZDkzOGRjMmIxZTkzZmVhMDIyZGEzMGJj
2008-09-07 12:02:57.464683500 Net::SMTP::SSL=GLOB(0x9002228)<<< 535 Authentication failure
2008-09-07 12:02:57.464693500 SMTP authentication with ISP server failed
2008-09-07 12:02:57.466431500 Net::SMTP::SSL=GLOB(0x9002228)>>> QUIT
2008-09-07 12:02:57.547674500 Net::SMTP::SSL=GLOB(0x9002228)<<< 221 isp.att.net
/\/\/\/\/\/
I have searched the forums and bug tracker. I did find some old reference to SMEServer does not do CRAM-MD5, but that was in 2006. What am I overlooking and/or doing wrong?
SMEServer is a great distro. I have used if for years at multiple sites. I have always been able to figure things out from the either the docs, the code or consulting the info/advice from the wonderful community at contribs.org.
But, now I am stuck. Help most appreciated. Thanks.
-
Are you sure you have your settings correct?
2008-09-07 12:02:57.207734500 Net::SMTP::SSL=GLOB(0x9002228)<<< 250-AUTH ANONYMOUS CRAM-MD5 LOGIN NTLM PLAIN
This looks wrong, as if you are trying to log in anonymously. Show the output of:
config show smtp-auth-proxy
and
config show SMTPSmartHost
Note: "*****" out your username and password.
-
Thanks for your prompt response.
Here is what those settings look like ...
[root@pylon2 log]# config show SMTPSmartHost
SMTPSmartHost=fmailhost.isp.att.net
[root@pylon2 log]# config show smtp-auth-proxy
smtp-auth-proxy=service
Debug=enabled
Passwd=*********
PeerPort=465
Userid=***************
status=enabled
Thanks for reviewing it.
-
2008-09-07 12:02:57.207734500 Net::SMTP::SSL=GLOB(0x9002228)<<< 250-AUTH ANONYMOUS CRAM-MD5 LOGIN NTLM PLAIN
This looks wrong, as if you are trying to log in anonymously.
I'm sorry, I misspoke here. That is the remote mail server asking SME for your login information/type. Your server responds back with:
2008-09-07 12:02:57.296280500 Net::SMTP::SSL=GLOB(0x9002228)>>> AUTH CRAM-MD5
It looks like SME supports CRAM-MD5 but for some reason the remote server is rejecting your login.
You should open a bug and report this.
-
You should open a bug and report this.
After you have done so, please post the url to the bug here for future reference.
-
Bug reported: 09/08/2008. See:
http://bugs.contribs.org/show_bug.cgi?id=4544
-
Bug reported: 09/08/2008. See:
http://bugs.contribs.org/show_bug.cgi?id=4544
The problem is clearly with att.net's mail server. It advertises that it is capable of CRAM::MD5, but it lies. Others have discovered this as well:
http://community.pmail.com/forums/thread/12510.aspx