Koozali.org: home of the SME Server
Obsolete Releases => SME Server 7.x => Topic started by: mgb on November 23, 2008, 11:00:50 AM
-
to config in server-manager the dhcpd
-
to config in server-manager the dhcpd
Use the Hostname and addresses panel.
And finally:
- start reading the manuals as you have been told many times before. Most of your questions are answered in the manuals
- try to phrase your problems/questions in proper English sentences instead of making us guess what you are after
-
Thanks ok
to config dhcp from https://myserver/server-manager
is ok to ?
db configuration setprop ExternalInterface IPAddress <ip>
db configuration setprop ExternalInterface Gateway <gatewayip>
db configuration setprop ExternalInterface Netmask <netmaskip>
db configuration setprop ExternalInterface Network <networkip>
db configuration setprop ExternalInterface Broadcast <broadcastip>
config set ExternalIP <ip>
signal-event ip-change
-
Thanks ok
to config dhcp from https://myserver/server-manager
is ok to ?
db configuration setprop ExternalInterface IPAddress <ip>
db configuration setprop ExternalInterface Gateway <gatewayip>
db configuration setprop ExternalInterface Netmask <netmaskip>
db configuration setprop ExternalInterface Network <networkip>
db configuration setprop ExternalInterface Broadcast <broadcastip>
config set ExternalIP <ip>
signal-event ip-change
mgb, PLEASE, try to explain in english WHAT are you doing..
Ciao
Stefano
p.s. DON'T execute the commands above
-
mgb, PLEASE, try to explain in english WHAT are you doing..
I second that. And please do not modify your posts with vital information. If you have new information, please post this as a separate post, the edit function is used to correct errors not to make (important) additions.
-
Thanks ok
to config dhcp from https://myserver/server-manager
is ok to ?
db configuration setprop ExternalInterface IPAddress <ip>
db configuration setprop ExternalInterface Gateway <gatewayip>
db configuration setprop ExternalInterface Netmask <netmaskip>
db configuration setprop ExternalInterface Network <networkip>
db configuration setprop ExternalInterface Broadcast <broadcastip>
config set ExternalIP <ip>
signal-event ip-change
Since I have a hard time understanding what you are after since you do not give information I suspect you are trying to configure your external interface (the one connected to the internet). Perhaps this might be off help: http://wiki.contribs.org/SME_Server:Documentation:Administration_Manual:Chapter5#Configuring_Your_External_Interface