Koozali.org: home of the SME Server
Legacy Forums => General Discussion (Legacy) => Topic started by: Arthur on May 15, 2002, 01:57:27 AM
-
Hi
I spent a lot of time to set up my SME with the ADSL!
First I had the problem that you couldn't reach the SME behind the router from the internet. Finally I solved the problem with some NAT entries. This works now.
Now I have the problem, that my ISP each day changes the IP of the ADSL router. Therefore I set up a dyndns.org account like "mydomain.com"
Also my SME is set to this domain "mydomain.com" and I have also activated the automatic-IP-update-function to dyndns.org with the right username and password.
The problem is, that the SME doesn't update the IP address on dyndns.org!
After hours of hard work I found out the following:
/var/log/messages
May 14 20:22:21 firewall dyndns.org: "mydomain.com" does not exist on the dyndns.org system.
Any advice strongly appreciated!
Arthur
-
This may be your lucky day, I just fixed the same (or very similar) problem over the weekend, albeit for dialup.
The client has an e-smith domain name of xyz.ca but a dyndns name of xyz.dyndns.org. In the messages log the error/problem is that that the two appear to be combined when attempting to sync (ie: trying for xyz.ca.dyndns.org).
Anyway, here's what I did it get it to work:
Find the /etc/e-smith/events/ip-change/S85update-dns file.
In there is a line:
my $domain = db_get(\%conf, 'DomainName');
which fetches your e-smith's domain name (in our case the xyz.ca)
I commented that out and added the following hardcoded value:
my $domain = "xyz.dyndns.org";
Hope that helps, Aaron
-
Hi
Thank you very much for you help!
I did actually work! I don't get this boring error message anymore!
The problem I now have is the following!
My E-SMITH has the following IPs:
LAN: 192.168.*.*
OUTSIDE (to ADSL ROUTER) 10.0.0.1
ADSL-ROUTER:
TO E-SMITH: 10.0.0.138
TO INTERNET: ?.?.?.? (this address has to be updated to dyndns.org)
LAN---E-SMITH----ADSL/ROUTER----INTERNET
Unfortunately the ADSL ROUTER becomes the official IP-ADDRESS an not my E-SMITH!
Therefore my E-SMITH updates the IP-ADRESS 10.0.0.1 to DYNDNS.ORG instead of the ADSL-ROUTER-IP-ADRESS
Any help strongly appreciated!
Arthur
-
I understand the E-Smith DynDNS feature expects you to be running the e-smith with a dual network interface, as a router. Therefore the external interface, a serial connection to a dialup modem or 2nd NIC connected to the adsl modem, would be assigned the tumbling IP from your ISP and the e-smith dyndns update would occur upon IP change.
Unless I am missing something, if you have a combination modem/router then certainly that would be picking up your given IP and the e-smith dyndns should be turned off as I dont see how it can help you.
I have clients that have a similar setup (xDSL modem feeding into a LinkSys firewall/router) and they just use a Windows DNYDNS update client on one of their workstations to keep the DynDNS uptodate.