Koozali.org: home of the SME Server

Obsolete Releases => SME Server 7.x => Topic started by: grattman on January 30, 2009, 01:45:36 PM

Title: View Portforwarding
Post by: grattman on January 30, 2009, 01:45:36 PM

Hi all,

We implemented a firewall/router other than SME (not my idea) and in doing so had to configure the SME server to "server-only" mode. I need to address some port-fowarding issues but this feature is not accessible in server-only mode. I only want to get the port numbers that used to be forwarded, is it possible to view a .conf or db variable for this information?

Thanks in advance,
Grattman

Title: Re: View Portforwarding
Post by: mmccarn on January 30, 2009, 02:31:15 PM

Code: [Select]

db portforward_tcp showand

Code: [Select]

db portforward_udp show

Title: Re: View Portforwarding
Post by: Stefano on January 30, 2009, 02:31:41 PM

Hi

go to /home/e-smith/db and look its content.. I'm sure you'll find the way :)

damn.. 30 sec too late :-D

Ciao
Stefano

Title: Re: View Portforwarding
Post by: grattman on January 30, 2009, 03:28:18 PM

Sweet....thank you much!

Title: Re: View Portforwarding
Post by: mmccarn on January 30, 2009, 04:04:37 PM

Quote from: Stefano a.k.a. nenonano

damn.. 30 sec too late :-D

Heh heh

Title: Re: View Portforwarding
Post by: p-jones on January 30, 2009, 11:40:35 PM

Is viewing the port forwarding relevant in server-only mode. Can SME perform any port forwarding in this mode ? I thought not.

I would have thought you would have been looking at the firewall / router for that in your config situation.

Title: Re: View Portforwarding
Post by: dgs on January 31, 2009, 12:01:30 AM

Quote from: p-jones on January 30, 2009, 11:40:35 PM

Is viewing the port forwarding relevant in server-only mode. Can SME perform any port forwarding in this mode ? I thought not.

I would have thought you would have been looking at the firewall / router for that in your config situation.

I was thinking the same thing.

Quote from: grattman on January 30, 2009, 01:45:36 PM

We implemented a firewall/router other than SME (not my idea) and in doing so had to configure the SME server to "server-only" mode.

Having another firewall thrust upon you doesn't mandate use in server mode only, even if it is unnecessary/undesirable. SME and the other router can be configured for use in line. Did you also have a change in cabling thrust upon you which removed  usage of the SME wan interface?

Title: Re: View Portforwarding
Post by: grattman on January 31, 2009, 12:04:13 AM

I tried several different configs to get the two to play nicely. The end scenario was that the SME had to be in server-only mode to work with the firewall.

Title: Re: View Portforwarding
Post by: CharlieBrady on January 31, 2009, 12:11:26 AM

Quote from: p-jones on January 30, 2009, 11:40:35 PM

Can SME perform any port forwarding in this mode ?

No (which is why the feature is disabled in the server manager).