Koozali.org: home of the SME Server
Contribs.org Forums => General Discussion => Topic started by: veebr0 on February 09, 2009, 10:52:16 PM
-
Hi guys, today I finally install my IBM X3650 server with 12GB of ram, but when I ron the free command I can see that only 4 GB of ran has been recognized event 12GB that I had installed in this Server, really need that the server recognized all of physically memory due to I have to user VMware to create a Virtual Windows 2003 server r2.
[root@serverfp ~]# free
total used free shared buffers cached
Mem: 3107744 394408 2713336 0 21168 200292
-/+ buffers/cache: 172948 2934796
Swap: 5144568 0 5144568
[root@serverfp ~]#
Thanks in advance,
Eviny
-
SME Server is not 64 bit so it is not possible to see all 12GB.
Here is my recommendation.
Install CentOS 64-bit on your server (usually designated by x86_64 or AMD64), then install VMWare on that, and finally install SME in a virtual machine.
It may not be pretty but it is the only way to utilize all 12GB of RAM in your server.
Craig
-
SME Server is not 64 bit so it is not possible to see all 12GB.
this is not true.. please read here (http://www.centos.org/product.html).. you need a different kernel
hth
ciao
Stefano
-
this is not true.. please read here (http://www.centos.org/product.html).. you need a different kernel
hth
ciao
Stefano
I only meant that the default SME install is not 64 bit.
That looks like it will work well, except that you would have to manually set it up if its not available in any repos.
Craig
-
I only meant that the default SME install is not 64 bit.
That looks like it will work well, except that you would have to manually set it up if its not available in any repos.
I don't think that is what Stefano meant. SME normally has smp as a kernel option which will give you 16GB addressable. You should only have to do something "unnatural" if you need more than that (going to hugemem). I personally run 8GB and have VMWare on top of SME.
See also: http://wiki.contribs.org/SME_Server:Documentation:FAQ#Memory_usage_and_limits
When the system boots up you will be given an option as to running EL or ELsmp. If you run a single proc then you may have to take additional steps to boot with the smp kernel. I'm sure a check through the wiki will get you what you need.
-
When the system boots up you will be given an option as to running EL or ELsmp. If you run a single proc then you may have to take additional steps to boot with the smp kernel.
No, there is nothing special to do, just choose ELsmp from the menu, using arrow keys.
Once the SMP kernel is chosen, it will be the default at next reboot.
As always:
Don't report problems here - Please report bugs and potential bugs in the bug tracker
"SME server 7.4 do not recognize more than 4GB of ram" sounds like a problem to me.
-
No, there is nothing special to do, just choose ELsmp from the menu, using arrow keys.
I wasn't sure because in my quick search I found:
http://bugs.contribs.org/show_bug.cgi?id=3095
which let to FAQ entry:
http://wiki.contribs.org/SME_Server:Documentation:FAQ#Booting_with_SMP_kernel_after_upgrade_to_version_7.2_from_CD
which seem to indicate uniproc's may require you to install ELsmp explicitly for an upgrade (with resolution to the bug in SME8 timeframe). But I wasn't sure if a fresh install would see the same issue given the problem description in 3095.
-
I wasn't sure because in my quick search I found:
http://bugs.contribs.org/show_bug.cgi?id=3095
which let to FAQ entry:
http://wiki.contribs.org/SME_Server:Documentation:FAQ#Booting_with_SMP_kernel_after_upgrade_to_version_7.2_from_CD
which seem to indicate uniproc's may require you to install ELsmp explicitly for an upgrade (with resolution to the bug in SME8 timeframe). But I wasn't sure if a fresh install would see the same issue given the problem description in 3095.
Yes. I'd forgotten about that bug (which should never have been allowed to creep in).
-
sorry for the OT: Charli, I would like to contact you.. how cha I do?
Thank you
ciao
Stefano
-
sorry for the OT: Charli, I would like to contact you.. how cha I do?
If you haven't yet found my email address then you are not trying hard enough ... :-)
-
No, there is nothing special to do, just choose ELsmp from the menu, using arrow keys.
Once the SMP kernel is chosen, it will be the default at next reboot.
As always:
Don't report problems here - Please report bugs and potential bugs in the bug tracker
"SME server 7.4 do not recognize more than 4GB of ram" sounds like a problem to me.
Hey, In this opportunity I want to say Thanks to all, but specially to Craig, Stefano and Christian due to the information provided was very interesting, however as I said before I´m not an expert in SME now, I hope in the future will be :lol:, really Cristian I don't understand when you say that "there is nothing special to do, just choose ELsmp from the menu, using arrow keys" where I found this option when the SME server is booting or when I'm installing it.
I really appreciate your answer or necessary clear steps to find a fine solution to my problem.
Eviny
-
really Cristian I don't understand when you say that "there is nothing special to do, just choose ELsmp from the menu, using arrow keys" where I found this option when the SME server is booting or when I'm installing it.
Actually Charlie said that but what I said was:
When the system boots up you will be given an option as to running EL or ELsmp.
So boot, and you will be given the choice (for about 5 seconds before it chooses the default); use the arrow keys to choose the kernel you want. Charlie then further clarified that once you choose this option, it will be saved as the default kernel for booting.
If when you boot you only see an option for EL and ELsmp does not exist then take a look at the FAQ entry I refer to above (http://wiki.contribs.org/SME_Server:Documentation:FAQ#Booting_with_SMP_kernel_after_upgrade_to_version_7.2_from_CD).
It will tell you how to update to ELsmp.
Hope that helps.
-
I really appreciate your answer or necessary clear steps to find a fine solution to my problem.
The only necessary and clear step to solving your problem is for you to report it via the bug tracker.
-
The only necessary and clear step to solving your problem is for you to report it via the bug tracker.
Thanks Charlie for your advise, I will consider your recommendation for futures questions, however the ELsmp module was available in the boot option, so now I can see 12GB ram and all server procesor installed in my server (4), but for culture and learning more what ELsmp mean, can some one explain me or sent a link page that I can red.
Thanks to all
C A S E C L O S E D AND S O L V E D :P
-
veebr0
...but for culture and learning more what ELsmp mean, can some one explain me or sent a link page that I can red....
Have you done an advanced search on these forums as I'm certain that question has been answered here previously. Go back a year or two or three though.
Even google should give you the answer.