Koozali.org: home of the SME Server

Obsolete Releases => SME VoIP (Asterisk, SAIL etc) => Topic started by: frifri on July 22, 2010, 11:56:22 PM

Title: spa-3102FXO : Trunk Name NOT Entered!!
Post by: frifri on July 22, 2010, 11:56:22 PM

Hi,

asterisk 1.4.33.1 - sail 2.5.1-14 - sme 7.5.1

I want to setup a spa-3102.  Gave peername, Gateway PSTN number and Gateway MAC Address in the server-manager/trunklines, clicking 'save' gives me "Trunk Name NOT Entered !!"

??

F.

Title: Re: spa-3102FXO : Trunk Name NOT Entered!!
Post by: SARK devs on July 25, 2010, 11:11:00 PM

There have been a few posts on this subject.  Basically, auto provisioning support for the 3102 is broken.  It is a complex device to auto provision due to the fact that it has two presences (one line, one extension) and you have to manage both. 

You can still use the device with sail but you'll have to set it up manually.  You can simply define it as a trunk and an extension using GeneralSIP and it will work fine.

We have done some work on the 3102 for V3.0 but right now it is still not 100%.

Kind Regards

S

Title: Re: spa-3102FXO : Trunk Name NOT Entered!!
Post by: versa on July 26, 2010, 01:33:03 AM

There is a basic guide here
http://sarkpbx.com/twiki/bin/view/Main/DocChapter253

I had one of these ata's (cannot remember the exact model 1fxo 1fxs)  however I was disappointed in the performance found a lot of echo on the PSTN line so ditched it and got a proper card from here.
http://www.novavox.co.uk/products/analogue-cards/a400p.html