Koozali.org: home of the SME Server

Obsolete Releases => SME Server 7.x => Topic started by: atilla-the-cat on August 16, 2010, 04:52:01 PM

Title: error installing glibc-common
Post by: atilla-the-cat on August 16, 2010, 04:52:01 PM: I am trying to install sme 7.5 on an IBM EServer x226. The install gets through all of the base questions and then aborts with "error installing glibc-common-2.3.4-2.43.e14_8.3" We have checked all of the hardware and have tried bot a SCSI and a SATA hard drive with the same results.

Can anyone help me with this error??

All help is greatly appreciated.
Title: Re: error installing glibc-common
Post by: Stefano on August 16, 2010, 04:59:19 PM: did you check your cd?
try to test your memory too, I had similar problems with faulty ram
Title: Re: error installing glibc-common
Post by: atilla-the-cat on August 16, 2010, 07:52:11 PM: The CD drive is good - we actually tried two different ones. The system had 4GB RAM and we took out 2GB. The other 2 tested okay, so we tried the install again. It got all the way through this time (thanks!), but we are getting an error when it boots about disabling interrupt 185. The error appears multiple times and the server will not boot.
Title: Re: error installing glibc-common
Post by: Stefano on August 16, 2010, 08:17:03 PM: please raise a bug in bugzilla: remember to give all the info and to report the exact error message

btw, is your hw supported by centos 4.8?
Title: Re: error installing glibc-common
Post by: byte on August 17, 2010, 11:06:47 AM: Quote from: atilla-the-cat on August 16, 2010, 07:52:11 PM
[..] boots about disabling interrupt 185. The error appears multiple times and the server will not boot.

I recently had this issue with my new intel board when trying to install SME Server 7.5.1. Haven't got my notes to hand but I think the "disabling interrupt 185" was something related to apm/acpi, I tried various boot parameters but proved unsuccessful. In the end I resorted to using SME Server 8b5 which installs and boots successfully.

Do see if you can install CentOS 4.8 as SME Server 7.5.1 is based on that particular version.
Title: Re: error installing glibc-common
Post by: atilla-the-cat on August 18, 2010, 04:22:27 PM: We did finally get the install to complete successfully. We turned off the SATA and everything seems to be fine.

For later reference, where would I find the centos 4.8 hardware list?
Title: Re: error installing glibc-common
Post by: byte on August 18, 2010, 04:24:53 PM: Quote from: atilla-the-cat on August 18, 2010, 04:22:27 PM
We did finally get the install to complete successfully. We turned off the SATA and everything seems to be fine.

Could you describe how you turned it off in case others come across this thread please.

Quote
For later reference, where would I find the centos 4.8 hardware list?

See here : https://hardware.redhat.com/
Title: Re: error installing glibc-common
Post by: Stefano on August 18, 2010, 04:29:55 PM: hi

you can check here (http://smolt.contribs.org/) and here (https://hardware.redhat.com/list.cgi?version=4&field0-0-0=cf_internal_whiteboard&type0-0-0=substring&value0-0-0=Server&field0-0-1=cf_internal_whiteboard&type0-0-1=substring&value0-0-1=laptop&field0-0-2=cf_internal_whiteboard&type0-0-2=substring&value0-0-2=desktop/workstation)

HTH
Title: Re: error installing glibc-common
Post by: atilla-the-cat on August 18, 2010, 09:49:47 PM: You just turn off the "planar SATA" in the BIOS. I also turned off the serial and parallel and used an IDE CD-ROM drive to load. It loaded okay with 2GB but not 4GB. This machine originally had an add-in Adaptec Tundra super dooper SCSI controller but I just got rid of that and used the on-board that is also an Adaptec (isn't as fast - no cache, etc).

This was no big deal because we are going from a P4-1.7/512mb/40gb 5400rpm SME server to a Xeon 3.4/2GB/150GB 10,000rpm system for 5 users with 20GB of data.