Koozali.org: home of the SME Server
Contribs.org Forums => General Discussion => Topic started by: nowhinjing on March 16, 2011, 12:24:06 PM
-
Hi,
I have the same problem as the person who posted this ...
http://forums.contribs.org/index.php?topic=46679.0 (http://forums.contribs.org/index.php?topic=46679.0)
none of the suggestions made there now work : I can not find any repo with this contrib.
Help !
-
I have the same problem as the person who posted this ...
are you using SME8b6?
what's going wrong? what error? any info?
-
Hi,
Thanks for the prompt reply and apologies for not having posted more fully.
Yes, using SME8b6
Tried using the process described in the Wiki - get contrib not found nothing to do.
Tried using the workaround described in the referenced post - get repository not found.
Have looked through distro.ibiblio.org and can find no references to smeserver-phpadmin apart from in /smeserver/releases/7.5.1/smecontribs/i386/RPMS which is not a valid baseurl for a repository.
Does this give you sufficient information ?
-
nowhinjing
see http://wiki.contribs.org/SME8.0_Contribs_QA#Setup
-
already tried that - does not work
by the way - same problem with smeserver-diskusage
also a darrell may contribution - a pattern emerges (perhaps)
-
can you please tell us the exact command you are using?
-
I've just installed a virtual SME8.b6, updated and followed the wiki page:
[root@prova ~]# db yum_repositories set sme7contribs repository \
> GPGCheck yes \
> MirrorList http://distro.ibiblio.org/pub/linux/distributions/smeserver/mirrorlist/smecontribs-7 \
> Name 'SME 7 - contribs' \
> Visible no \
> status disabled
[root@prova ~]#
[root@prova ~]# signal-event yum-modify
[root@prova ~]# yum clean all
Loaded plugins: fastestmirror, protect-packages, smeserver
Cleaning up Everything
Cleaning up list of fastest mirrors
[root@prova ~]# yum --enablerepo=sme7contribs install smeserver-phpmyadmin
Loaded plugins: fastestmirror, protect-packages, smeserver
Loading mirror speeds from cached hostfile
* base: centos.fastbull.org
* sme7contribs: mirror.hakkers.com
* smeaddons: mirror.hakkers.com
* smeextras: mirror.hakkers.com
* smeos: mirror.hakkers.com
* smeupdates: mirror.hakkers.com
* updates: wftp.tu-chemnitz.de
sme7contribs | 1.9 kB 00:00
sme7contribs/primary_db | 420 kB 00:02
Excluding Packages from CentOS - os
Finished
Excluding Packages from CentOS - updates
Finished
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package smeserver-phpmyadmin.noarch 0:2.11.1.2-3.el4.sme set to be updated
--> Processing Dependency: phpmyadmin for package: smeserver-phpmyadmin
--> Running transaction check
---> Package phpmyadmin.noarch 0:2.11.11.3-1.el4.rf set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
========================================================================================================================================================================
Package Arch Version Repository Size
========================================================================================================================================================================
Installing:
smeserver-phpmyadmin noarch 2.11.1.2-3.el4.sme sme7contribs 9.1 k
Installing for dependencies:
phpmyadmin noarch 2.11.11.3-1.el4.rf sme7contribs 4.2 M
Transaction Summary
========================================================================================================================================================================
Install 2 Package(s)
Upgrade 0 Package(s)
Total download size: 4.2 M
Is this ok [y/N]:
everything is working as expected, so I'm quite sure it's a problem on your side
-
Magic ! It works.
As you say it must have been me, but I cannot understand why as I cut and pasted the commands in exactly the same way on each occasion.
Grateful thanks to both Mary and Stephano for taking the time to help this confused oldie.
NWJ
-
Yes, using SME8b6
Then yout question is off-topic for this forum, moving it to General Discussion where it is more appropriate.
-
Hi I have been battleing with this for some time now, and i finally got it working, just a note with those that might still be having a problem, when i put the following in:
db yum_repositories set sme7contribs repository \
GPGCheck yes \
MirrorList http://distro.ibiblio.org/pub/linux/distributions/smeserver/mirrorlist/smecontribs-7 \
Name 'SME 7 - contribs' \
Visible no \
status disabled
i was copying and pasting all together instead of putting in one line at a time.
hey presto everything worked sweet. Becoming lazy and looking for the short cut. Well after reloading several times and just about to throw V8 out, now back on track for converting to V8.
thanks
John
-
Hi Sorry for opening this again, but i have just done another SME8 B6 server, and followed the steps above to the letter, (several times), but i keep getting "desolving errors."
I installed vacation without any errors
Does any one have any ideas?
> [root@sme8server ~]# yum --enablerepo=sme7contribs install smeserver-phpmyadmin
> Loaded plugins: fastestmirror, protect-packages, smeserver
> Loading mirror speeds from cached hostfile
> * base: www.ftp.saix.net
> * sme7contribs: ftp.surfnet.nl
> * smeaddons: ftp.surfnet.nl
> * smeextras: ftp.surfnet.nl
> Excluding Packages from CentOS - os
> Finished
> Setting up Install Process
> Resolving Dependencies
> --> Running transaction check
> ---> Package smeserver-phpmyadmin.noarch 0:2.11.1.2-3.el4.sme set to be updated
> --> Processing Dependency: phpmyadmin for package: smeserver-phpmyadmin
> --> Finished Dependency Resolution
> smeserver-phpmyadmin-2.11.1.2-3.el4.sme.noarch from sme7contribs has depsolving problems
> --> Missing Dependency: phpmyadmin is needed by package smeserver-phpmyadmin-2 .11.1.2-3.el4.sme.noarch (sme7contribs)
> Error: Missing Dependency: phpmyadmin is needed by package smeserver-phpmyadmin- 2.11.1.2-3.el4.sme.noarch (sme7contribs)
> You could try using --skip-broken to work around the problem
> You could try running: package-cleanup --problems
> package-cleanup --dupes
> rpm -Va --nofiles --nodigest
> The program package-cleanup is found in the yum-utils package.
> [root@sme8server ~]#
thanks
John
-
Yep... I'm having the same problem.
:-(
-
solved this by manually download the smephpmyadmin and installing
for anyone interested
http://www.sme-server.de/download/sme7/contribs/smecontribs/index.html
download
phpmyadmin
smephpmyadmin
then installed both with MC
signal-event post-upgrade
signal-event reboot
thanks John
-
solved this by manually download the smephpmyadmin and installing
for anyone interested
http://www.sme-server.de/download/sme7/contribs/smecontribs/index.html
download
phpmyadmin
smephpmyadmin
then installed both with MC
signal-event post-upgrade
signal-event reboot
thanks John
Thank you! This worked!