Koozali.org: home of the SME Server

Obsolete Releases => SME Server 8.x => Topic started by: kwak on April 27, 2011, 07:46:31 AM

Title: second NIC not detected under Xenserver
Post by: kwak on April 27, 2011, 07:46:31 AM

Hi,

The two NICs were detected upon initial install of SME 8B6.ANd the server is configured as server only in DMZ. Now i want to configure it as Server/Gateway but SME can't see the 2nd NIC on the xenserver. Please advise.

In addition, I issued lspci, it can see two realtek NIC.

kwak

Title: Re: second NIC not detected under Xenserver
Post by: larieu on April 27, 2011, 08:21:29 AM

try to go to console as admin
(ssh or puty and user admin works as well)

this will lead you to the TUI where you can change your server configurations

or if you are there as root
just issue the command

Code: [Select]

console

Title: Re: second NIC not detected under Xenserver
Post by: kwak on April 27, 2011, 05:15:30 PM

Hi,

THis has been resolved. THe xenserver after configuring the SME from Server/Gateway to Server ONly, suddenly didn't recognize the NICs. I had manually edit the files ifcfg-eth1 and eth2 to match the MAC configuration for each NIC.

Edward

Title: Re: second NIC not detected under Xenserver
Post by: CharlieBrady on May 06, 2011, 02:19:52 AM

Please report any problems via the bug tracker. Only in that way can problems be fixed.

Title: Re: second NIC not detected under Xenserver
Post by: haliparotin on May 10, 2011, 02:53:02 AM

hi! i just want to ask i have also 2 NIC for my SME Server 8 beta 6 but not on Xenserver  :-) ... can you gave me how can i edit this? THANK YOU...

Title: Re: second NIC not detected under Xenserver
Post by: Stefano on May 10, 2011, 07:22:29 AM

please don't hijack topics
open a new one or file a bug, thank you