Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: Andres Gould on July 29, 2002, 10:04:01 PM

Title: Access to Server-Manager
Post by: Andres Gould on July 29, 2002, 10:04:01 PM

I have problem I have made all posible acess to server but I cant acess non server-manager, non user-manager, non user-paswerd from anather computer VIA internet
Chak it out what it write. https://www.efw.com.ar/server-manager

What could be the problem, may be this manager is using some like domein like secure.efw.com.ar ?

Please help I got out of ideas what coud be the problem!

Thanks!

Title: Re: Access to Server-Manager
Post by: Phil Hyde on July 30, 2002, 01:06:31 AM

You cannot make this work (that I know of, anyhow).  

Here is a good (secure) solution to let you access server manager from the internet.

http://myezserver.com/downloads/mitel/howto/putty-howto.html

--phil

Title: Re: Access to Server-Manager
Post by: Jon Blakely on July 30, 2002, 03:52:52 AM

Andres,

What version of SME are you using.??

If it is 5.5, at the bottom of the "remote access" page in the server-manager there is link to a page that will allow you to enable remote access to the server-manager via SSL. You will need to specify an ip address or range of address's. You could specify 0.0.0.0/0.0.0.0 which would allow access from anywhere but could be a major security issue. If you do this make sure your root/admin password is as complex and long as you can remember.

If you are using less than 5.5 read this

http://www.e-smith.org/docs/howto/remote-mgr-access-howto.html

The most secure would be to use SSH access using putty
http://www.carrollweb.net/putty/

Jon

Title: Re: Access to Server-Manager
Post by: robert on November 26, 2002, 06:59:26 AM

i have nominated my notebook ip address
at the foot of Remote Access,

but when i http://IP/server-manager i get
'You don't have permission to access /server-manager on this server.'

pls tell me what im doing wrong

kind regards Rob

Title: Re: Access to Server-Manager
Post by: Jim Hale on November 26, 2002, 07:37:35 AM

Try https://ip/server-manager. :)

Title: Re: oops i tried https too - no access
Post by: robert on November 26, 2002, 07:43:00 AM

sorry for typo in original posting .
i should also add that i used a mask of 255.255.255.255
Rob

Title: Re: oops i tried https too - no access
Post by: Jim Hale on November 26, 2002, 07:48:18 AM

How about adding the local network block to 'Local Networks'? I use 10.10.1.x for my network and I added 10.0.0.0. I'm routing thru an IPCop box (but I doubt that makes a difference).

Just drawing straws here. :)