Koozali.org: home of the SME Server

Obsolete Releases => SME Server 8.x => Topic started by: vialcollet on February 17, 2013, 11:56:34 PM

Title: HDD Size with SME 8.0
Post by: vialcollet on February 17, 2013, 11:56:34 PM

Hi,

I plan to setup a new server with large HDDs. Did anyone experienced 3To HDDs with SME Server 8.0?
I would have the system on a 500Go Drive and then 2 HDDs of 3To.

Thanks for your advise...

Title: Re: HDD Size with SME 8.0
Post by: TerryF on February 18, 2013, 03:24:23 AM

Three threads here:
http://forums.contribs.org/index.php/topic,49551.msg247732.html#msg247732
http://forums.contribs.org/index.php/topic,49193.msg245380.html#msg245380
http://forums.contribs.org/index.php/topic,48093.msg244954.html#msg244954

Use of 3tb disks would appear to be not supported.

Title: Re: HDD Size with SME 8.0
Post by: janet on February 18, 2013, 03:31:24 AM

vialcollet

Please read recent posts & familiarize yourself with the Forums (ie use search). This was answered about 10 posts ago

> Use of 3tb disks would appear to be not supported.

As I understand it, what you propose should work OK if done correctly as per this post
http://forums.contribs.org/index.php/topic,49551.msg247794.html#msg247794

Title: Re: HDD Size with SME 8.0
Post by: vialcollet on February 18, 2013, 01:31:12 PM

Ouch... for some reasons, my yesterday's search was far from perfect. This somehow gives me the opportunity to say thank you to the community for this great distribution.
I'll go with 2To drives as I don't want to take too much risks.

Thanks again.

Title: Re: HDD Size with SME 8.0
Post by: stephdl on February 18, 2013, 09:56:18 PM

See you later so...if you want to go to the wild side, take a look here....we need more help and more volunteers...

http://lists.contribs.org/mailman/listinfo/
or
http://wiki.contribs.org/SME_Server:Volunteering

any skills can be a great part of this project.

Title: Re: HDD Size with SME 8.0
Post by: janet on February 19, 2013, 12:35:24 PM

vialcollet

Quote

I would have the system on a 500Go Drive and then 2 HDDs of 3To.
I'll go with 2To drives as I don't want to take too much risks.

If you want even less risk & hassle, then do not use the 500Gb drive with the system only installed on it,

Simply build the server with 2 x 2Tb drives in a software RAID1 array. The less number of drives, the greater the reliability, and with a 2 disk RAID1 array easier repair or replacement.

Title: Re: HDD Size with SME 8.0
Post by: newburns on February 24, 2013, 03:57:36 PM

I think it can be done.
Replace the 500gb disk one at a time with the 3tb disk so the Raid can rebuild on the 3TB disk. Then when both disk have been replaced and rebuilt, you will have a 500gb partition on two 3TB disks. Grow the lvm to the full 3TB capacity.
You can't install on 3TB, but you should be able to utilize 3TB nevertheless.

Title: Re: HDD Size with SME 8.0
Post by: newburns on February 25, 2013, 06:23:34 AM

http://forums.contribs.org/index.php/topic,48185.msg239197.html#msg239197