Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: Per on August 15, 2002, 01:50:53 PM

Title: Printer Access denied, unable to connect
Post by: Per on August 15, 2002, 01:50:53 PM

On a SME 5.5 installation I have added two printers to the server, one to the parallel port and one to the USB-port. In Windows XP both of them show up with status: Access denied, unable to connect. The USB-printer (Epson 740) works anyhow, but the lp0-printer (HP Laserjet 5P) does not react at all. I have checked for hardware-errors.
The boot.log says:
aug 13 16:46:45 eng8-server lpd: Starter lpd:
aug 13 16:46:45 eng8-server lpd: Warning - epson740: cannot open lp device '/dev/usb/lp0' - Ingen sådan enhed [= No such unit]
aug 13 16:46:46 eng8-server lpd: Warning - hplj5p: cannot open lp device '/dev/lp0' - Ingen sådan enhed
aug 13 16:46:46 eng8-server lpd: lpd opstart succeeded

Can anyone give me a clue?

Title: Re: Printer Access denied, unable to connect
Post by: brian read on August 15, 2002, 02:05:14 PM

I also have this problem.

See:

http://forums.contribs.org/index.php?topic=13068.msg49283#msg49283

All ideas gratefully received

Brian

Title: Re: Printer Access denied, unable to connect
Post by: JB on August 26, 2002, 08:58:03 AM

I posted this to link Brian referenced as well.

I was getting the same thing with network printers on a win2k sp3 pc connecting to a 5.5 update 2 server.  

Here is what I did to fix things for me:

I created another network printer with the same IP address as the one that wasn't working.  This printer worked.  I still could not connect to my original printer.  So, I created another network printer with the same IP address as well.  This printer also worked.  Then my original printer connection came back as well.  So now I have 3 network printers defined with the same IP address.  I deleted the 1st one, my original connection still worked, I deleted the 2nd one, and my orginal connection still worked.  I went ahead and deleted my original one and re-created it with the same name, settings, etc. and it still works.  I rebooted the server, and the printer still works.

I am not quite sure what the real issue is, but the above did fix it for me.

YMMV,

JB

Title: Re: Printer Access denied, unable to connect
Post by: Guido on November 19, 2002, 12:09:50 AM

I have the same problem.

... Warning - sc880: cannot open lp device 'dev/usb/lp0/' - No such device

But i have no IP adress for my EPSON Stylus Color?.

Title: Re: Printer Access denied, unable to connect
Post by: JB on November 20, 2002, 06:23:32 AM

I don't have any experience with a USB printer on SME, so I'm not going to be any good to you here.

Sorry.   :(

Title: Re: Printer Access denied, unable to connect
Post by: Guido on November 21, 2002, 01:07:19 AM

No prob JB,

have problems with my printer on parallel too!
Server says 'lpd: lpd startup succeeded'
But my EPSON Status Monitor says, it can't communicate with the printer.
I can see the printjob at the printer-spooler under W2k and then it disappears.
I think the job is forwarded to the server.
Mmmmhhhhh. Don't know whats wrong with my config.