Koozali.org: home of the SME Server

Obsolete Releases => SME Server 9.x => Topic started by: yythoss on November 20, 2018, 01:23:17 AM

Title: Last Update
Post by: yythoss on November 20, 2018, 01:23:17 AM

yum update tries to install a wrong rpm

Code: [Select]

Löse Abhängigkeiten auf
--> Führe Transaktionsprüfung aus
---> Package clamav.x86_64 0:0.100.2-1.el6.sme will be aktualisiert
---> Package clamav.x86_64 0:0.100.2-4.el6.sme will be an update
---> Package clamav-db.x86_64 0:0.100.2-1.el6.sme will be aktualisiert
---> Package clamav-db.x86_64 0:0.100.2-4.el6.sme will be an update
---> Package clamd.x86_64 0:0.100.2-1.el6.sme will be aktualisiert
---> Package clamd.x86_64 0:0.100.2-4.el6.sme will be an update
---> Package e-smith-base.noarch 0:5.6.0-31.el6.sme will be aktualisiert
---> Package e-smith-base.x86_64 0:5.8.0-38.el7.sme will be an update
---> Package e-smith-ntp.noarch 0:2.4.0-6.el6.sme will be aktualisiert
---> Package e-smith-ntp.noarch 0:2.4.0-7.el6.sme will be an update
---> Package e-smith-samba.noarch 0:2.4.0-25.el6.sme will be aktualisiert
---> Package e-smith-samba.noarch 0:2.4.0-26.el6.sme will be an update
---> Package perl-Mail-DMARC.noarch 0:1.20141206-1.el6.sme will be aktualisiert
---> Package perl-Mail-DMARC.noarch 0:1.20141206-2.el6.sme will be an update
--> Abhängigkeitsauflösung beendet

Abhängigkeiten aufgelöst

================================================================================================================================================================
 Paket                                   Arch                           Version                                        Repository                         Grösse
================================================================================================================================================================
Aktualisieren:
 clamav                                  x86_64                         0.100.2-4.el6.sme                              smeupdates                         1.3 M
 clamav-db                               x86_64                         0.100.2-4.el6.sme                              smeupdates                         162 M
 clamd                                   x86_64                         0.100.2-4.el6.sme                              smeupdates                         234 k
 e-smith-base                            x86_64                         5.8.0-38.el7.sme                               smeupdates                         348 k
 e-smith-ntp                             noarch                         2.4.0-7.el6.sme                                smeupdates                          52 k
 e-smith-samba                           noarch                         2.4.0-26.el6.sme                               smeupdates                         107 k
 perl-Mail-DMARC                         noarch                         1.20141206-2.el6.sme                           smeupdates                         994 k

Vorgangsübersicht
================================================================================================================================================================
Upgrade       7 Package(s)

Gesamte Downloadgrösse: 165 M
Ist dies in Ordnung? [j/N] :j
Lade Pakete herunter:
(1/7): clamav-0.100.2-4.el6.sme.x86_64.rpm                                                                                               | 1.3 MB     00:00
(2/7): clamav-db-0.100.2-4.el6.sme.x86_64.rpm                                                                                            | 162 MB     01:36
(3/7): clamd-0.100.2-4.el6.sme.x86_64.rpm                                                                                                | 234 kB     00:00
(4/7): e-smith-base-5.8.0-38.el7.sme.x86_64.rpm                                                                                          | 348 kB     00:00
(5/7): e-smith-ntp-2.4.0-7.el6.sme.noarch.rpm                                                                                            |  52 kB     00:00
(6/7): e-smith-samba-2.4.0-26.el6.sme.noarch.rpm                                                                                         | 107 kB     00:00
(7/7): perl-Mail-DMARC-1.20141206-2.el6.sme.noarch.rpm                                                                                   | 994 kB     00:01
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Gesamt                                                                                                                          1.6 MB/s | 165 MB     01:40
warning: rpmts_HdrFromFdno: Header V4 RSA/SHA1 Signature, key ID 56873151: NOKEY


Öffentlicher Schlüssel für e-smith-base-5.8.0-38.el7.sme.x86_64.rpm ist nicht installiert


Package e-smith-base.x86_64 0:5.8.0-38.el7.sme is for CentOS7

Title: Re: Last Update
Post by: TerryF on November 20, 2018, 01:48:27 AM

Damn, wrong ver moved, please

Exclude e-smith-base for time being until a higher power can fix it

You are doing well there, I am not even seeing the updates yet down here

Title: Re: Last Update
Post by: TerryF on November 20, 2018, 02:00:20 AM

Yep a SME10 update and a SME9 update its been a long couple of days, not an excuse just a fact..

I don't have power to resolve, need a higher power than I :-)

It will be fixed in a few hours

In meantime #
yum update --exclude e-smith-base

Added: Timezones aren't helping here

Title: Re: Last Update
Post by: ReetP on November 20, 2018, 09:56:41 AM

I'm not sure how I did that :-( Sorry.

I have pulled the update.

Just trying to kick buildsys to build a new v9 version as the original is not there.

I'll get the correct version over as soon as I can but it might be a few hours as I have to go out this morning.

Title: Re: Last Update
Post by: TerryF on November 20, 2018, 11:24:04 AM

No biggy, no sheep stations are at risk... :-)

Title: Re: Last Update
Post by: ReetP on November 20, 2018, 11:42:03 AM

LOLz....

Title: Re: Last Update
Post by: ReetP on November 20, 2018, 02:12:29 PM

OK - and released and in a mirror near you soon I hope.

smeserver/9/updates/e-smith-base-5.6.0-34.el6.sme.noarch.rpm

Title: Re: Last Update
Post by: mophilly on November 20, 2018, 06:06:59 PM

Nov 20, 9 AM Pacific time. yum update failed.

Code: [Select]

Error Downloading Packages:
  e-smith-base-5.8.0-38.el7.sme.x86_64: failure: RPMS/e-smith-base-5.8.0-38.el7.sme.x86_64.rpm from smeupdates: [Errno 256] No more mirrors to try.
I notice that this message refers to e-smith-base-5.8.0, while ReetP's post mentions e-smith-base-5.6.0. Perhaps a dependency in clamd-0.100?

Title: Re: Last Update
Post by: ReetP on November 20, 2018, 06:36:41 PM

No - the el7 version (which was wrong) is 5.8.x whereas the correct el6 version should be 5.6.x

If anyone gets stuck you might want to try :

Code: [Select]

yum clean metadata
yum update
Apologies once again :-(

Title: Re: Last Update
Post by: mophilly on November 20, 2018, 06:52:54 PM

yum clean then update worked for me!
Thanks!

Title: Re: Last Update
Post by: slicknic on November 22, 2018, 10:28:28 PM

Hello,

Also having some issues with the latest updates. This time with dependencies.

[root@gateway ~]# yum update
Loaded plugins: fastestmirror, smeserver
Setting up Update Process
Loading mirror speeds from cached hostfile
 * smeaddons: smeserver.de-labrusse.fr
 * smeextras: smeserver.de-labrusse.fr
 * smeos: smeserver.de-labrusse.fr
 * smeupdates: smeserver.de-labrusse.fr
Resolving Dependencies
--> Running transaction check
---> Package clamav.x86_64 0:0.99.3-1.el6.sme will be updated
---> Package clamav.x86_64 0:0.100.2-4.el6.sme will be an update
---> Package clamav-db.x86_64 0:0.99.3-1.el6.sme will be updated
---> Package clamav-db.x86_64 0:0.100.2-4.el6.sme will be an update
---> Package clamd.x86_64 0:0.99.3-1.el6.sme will be updated
---> Package clamd.x86_64 0:0.100.2-4.el6.sme will be an update
---> Package djbdns.x86_64 0:1.05-8.el6.sme will be updated
---> Package djbdns.x86_64 0:1.05-11.el6.sme will be an update
---> Package e-smith-base.noarch 0:5.6.0-31.el6.sme will be updated
---> Package e-smith-base.noarch 0:5.6.0-34.el6.sme will be an update
---> Package e-smith-ntp.noarch 0:2.4.0-6.el6.sme will be updated
---> Package e-smith-ntp.noarch 0:2.4.0-7.el6.sme will be an update
---> Package e-smith-pop3.noarch 0:2.4.0-6.el6.sme will be updated
---> Package e-smith-pop3.noarch 0:2.4.0-8.el6.sme will be an update
---> Package e-smith-qmail.noarch 0:2.4.0-7.el6.sme will be updated
---> Package e-smith-qmail.noarch 0:2.4.0-8.el6.sme will be an update
---> Package e-smith-samba.noarch 0:2.4.0-24.el6.sme will be updated
---> Package e-smith-samba.noarch 0:2.4.0-26.el6.sme will be an update
---> Package perl-Mail-DMARC.noarch 0:1.20141206-1.el6.sme will be updated
---> Package perl-Mail-DMARC.noarch 0:1.20141206-2.el6.sme will be an update
---> Package qpsmtpd.noarch 0:0.96-10.el6.sme will be updated
---> Package qpsmtpd.noarch 0:0.96-11.el6.sme will be an update
---> Package smeserver-yum.noarch 0:2.4.0-15.el6.sme will be updated
---> Package smeserver-yum.noarch 0:2.4.0-17.el6.sme will be an update
--> Processing Dependency: yum-plugin-post-transaction-actions for package: smeserver-yum-2.4.0-17.el6.sme.noarch
--> Finished Dependency Resolution
Error: Package: smeserver-yum-2.4.0-17.el6.sme.noarch (smeupdates)
           Requires: yum-plugin-post-transaction-actions
 You could try using --skip-broken to work around the problem
 You could try running: rpm -Va --nofiles --nodigest

Title: Re: Last Update
Post by: TerryF on November 22, 2018, 11:02:57 PM

Not my work, I would have gotten there eventually but I am sloowwww..

Thanks John..

You do not have the updates repo enabled

# db yum_repositories setprop updates status enabled;signal-event yum-modify

Title: Re: Last Update
Post by: ReetP on November 22, 2018, 11:40:40 PM

Chortle.

Just happened to get to my desk and have a server that hadn't been updated....

Title: Re: Last Update
Post by: slicknic on November 23, 2018, 11:50:09 AM

Quote from: TerryF on November 22, 2018, 11:02:57 PM

You do not have the updates repo enabled

# db yum_repositories setprop updates status enabled;signal-event yum-modify

Ah thank you. Ok now.