Koozali.org: home of the SME Server
Legacy Forums => General Discussion (Legacy) => Topic started by: Juergen Schuerer on September 10, 2002, 11:38:22 AM
-
ok, now my questions in english.
In the last days, i have tested the Mitel SME server in version 5.5 using an ISDN-card AVM-A1. up to now i was dialing over ISP MSN. So as to configure the mailing system, i must dial in over ISP t-online.But i get no connection.
Is there a known problem, Is there anybody who has experience ?
thanks
Juergen
-
I have no problem to dial-in to t-online using dsl or an external isdn-ta.
setup for user + pwd was done the usual way.
But I have to force my modem to use hdlc-mode.
jochen
-
Hi Jochen,
i can see in the file /var/log/messages that the connection is established (ipp0 = connected) only the authentification is incorrect. After the server has sent the password, the connection will be terminated.In the file /etc/ppp/pap-secrets is the username and the password correct. For username i use then common form like in "DFÜ-Netzwerk" (AK+T-online-Nr.+#+0001).
Any idea ?
Juergen
-
for all who are interested. The Username for a t-online account must entered in following form:
AAAAAAAAAATTTTTTTTTT\#MMMM
maybe this is only true if the t-online-number is less than 12 digits.
Ciao
Juergen
-
Good catch -- I'll open a bug report for that here.
(Please remember that we can't fix things unless we're told about them,
and that we're not always able to read everything that gets posted here --
if you think you've found a bug, and *especially* if you think you've found
a workaround for a bug, please let us know at bugs@e-smith.com.)
Cheers,
--Rich
-
>for all who are interested. The Username for a t-online account must entered in >following form:
>
>AAAAAAAAAATTTTTTTTTT\#MMMM
>
>maybe this is only true if the t-online-number is less than 12 digits.
>
>
This IS true as you can skip the "#" Character if it is more than 12 digits.
It is also mentioned in the t-online manual.
jochen