Koozali.org: home of the SME Server

Contribs.org Forums => Koozali SME Server 10.x => Topic started by: gieres on June 05, 2021, 11:29:49 PM

Title: PVE snapshots impossible
Post by: gieres on June 05, 2021, 11:29:49 PM

Hi,
I can't no more make snapshots on PVE. I don't know if it's a bugg of Koozali or PVE. I can only take these 3 screen shots.
I recently break two PVE because if you stop snpashot before message "failed", that locks the VM and PVE breaks.
Thank you in advance.
Bye

Title: Re: PVE snapshots impossible
Post by: TerryF on June 06, 2021, 10:09:06 AM

Odd, I have no problems with snapshots of sme10 VMs or sme9 or any other distro or OS on Proxmox..cant recall having an issue in the past either

Title: Re: PVE snapshots impossible
Post by: Jean-Philippe Pialasse on June 06, 2021, 02:49:49 PM

disk space?

Title: Re: PVE snapshots impossible
Post by: stephdl on June 06, 2021, 05:05:45 PM

qm unlock vm_id


To unlock a vm


Check your raid and also the smartctl output of your disks. I have too an issue with my spinning drives (over 45000 hours) but in my case it is a timeout issue

Title: Re: PVE snapshots impossible
Post by: gieres on June 06, 2021, 09:31:56 PM

Thanks Jean-Philippe and Stéphane,
@JP A priori, not, see dh.png.
But on PVE, HDs seem odd, see hd.png : PVE is installed on a hard RAID1 on a Dell server which have 4 HDs of 1 To.
I break the RAID, change one disk (# 0), remake a RAID1 and reinstall PVE.
@Stephdl I don't know how to use smartctl on hard RAID on Dell server and first I try this evening to make a snapshot and to morrow I shall read Dell's doc to know how verify RAID's disks.
And I come back.
Bye

Title: Re: PVE snapshots impossible
Post by: stephdl on June 06, 2021, 10:47:27 PM

smartctl -a /dev/sda

Check about errors, bad sectors