Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: steve on October 05, 2002, 08:44:57 PM

Title: APCUPSD Failed!
Post by: steve on October 05, 2002, 08:44:57 PM

Hi,
I have problem I hope someone can help me with.
After installing update3 to 5.1.2 in accordance with the instructions from this site I can no longer see the data from my UPS on the web interface.
When I go to APCUPSDs multimon.cgi page it just has the message:
Local Host       Not available: upsfetch: tcp_open failed
Has anyone else had this problem? Has anyone fixed it!
Steve

Title: Re: APCUPSD Failed!
Post by: Des Dougan on October 06, 2002, 04:39:01 AM

steve wrote:
>
> Local Host       Not available: upsfetch: tcp_open failed
> Has anyone else had this problem? Has anyone fixed it!

Yes and yes. Did you forget to restart the daemon?

Des Dougan

Title: Re: APCUPSD Failed!
Post by: steve on October 06, 2002, 05:48:54 PM

Doh!!!
Thanks it all works now! Strange that it didn't start itself on any of the many reboots I tried.
Steve

Title: Re: APCUPSD Failed!
Post by: Rob Wellesley on October 10, 2002, 03:16:21 AM

if you are using Myezserver contrib-

# cp /etc/apcupsd/apcupsd.conf /etc/apcupsd/apcupsd.conf.orig
# rpm -e dmc-mitel-apcupsd
# rpm -e apcupsd

Then reinstall the contrib

move the backed up conf
# "mv" /etc/apcupsd/apcupsd.conf.orig /etc/apcupsd/apcupsd.conf

# service apcupsd restart

Give it 30 seconds and then check your browser based monitoring

Title: Re: APCUPSD Failed!
Post by: Jáder Marasca on October 10, 2002, 04:48:50 AM

And what about to install new versions of APCUPSD like 3.8.5 or even 3.10 ?

I have BackUPS  CS 500 (the cheapest model in Brasil!)  connected with 128A cable to SME 5.1.2 (maybe next weekend it will be upgraded to 5.5!). I would like to upgrade 3.8.2 (from EZServer contrib) to 3.8.5 or 3.10.0 to get it working.

I´m afraid of get EVERYTHING WRONG by just issue and rpm -Uvh on 3.8.5/3.10.0 rpm!

Any tips are welcome.

Thanks!

Jáder

Title: Re: APCUPSD Failed!
Post by: Rob Wellesley on October 10, 2002, 05:00:57 AM

Jáder Marasca wrote:

> I´m afraid of get EVERYTHING WRONG by just issue and rpm -Uvh
> on 3.8.5/3.10.0 rpm!

Have a go and post your findings. If it don't work just remove the rpm and re-install 3.8.2 - you will probably need to revisit the conf file for the new rpm.

My advice would be to remove the dmc-mitel-apcupsd rpm first, and as well, on each occasion

Good luck.

Title: Re: APCUPSD Failed!
Post by: Jáder Marasca on October 10, 2002, 06:19:28 AM

Rob Wellesley wrote:
> Have a go and post your findings. If it don't work just
> remove the rpm and re-install 3.8.2 - you will probably need
> to revisit the conf file for the new rpm.

OK! Just before to update/reinstall this server I´ll try to update APCUPSD.
I think this will happen next week!

I´ll post my result here!

Thanks by now and bye!

Jáder