Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: kan3 on October 27, 2002, 11:56:21 PM

Title: new install/dup nic's
Post by: kan3 on October 27, 2002, 11:56:21 PM

Hi, hope not stupid newbie question.

Just installed 4.1.2 all seems fine, except unable to access internet.

Currently using 2 x 3com905tx nic.  Internal network running fine but just can't get access outside via my NTL cablemodem although lights do seem to be coming on modem and network card at the same time as if receiving data.

Anything that you can think to check ??


Just in process of setting external nic to eth0 - this is also set to use DHCP using ethernet identifier (as not using NTL username).

eth0 in the internal netowrk card and now configured to eth1 I think ?


Thanks

Title: Re: new install/dup nic's
Post by: kan3 on October 28, 2002, 03:41:41 PM

have now try configuration swapped and still the same

network fine nothing happening via cablemodem ??


excuse ignorance newbie to all of this,  have used ifconfig to check ip address of internal card - 192.168.1.1

how do i check ip address for the other card on eth0  ???  can i force the card to use DHCP ??

thanks

Title: Re: new install/dup nic's
Post by: LP on October 28, 2002, 06:17:59 PM

have you tried resetting the modem... mine woudn't give out a valid ip if I just swapped the cable. One hard reset (10 secs without power) on the modem and everything went smooth afterwards

Title: Re: new install/dup nic's
Post by: kan3 on October 28, 2002, 08:09:21 PM

have tried rebooting cable modem although only for a few seconds, although this method works fine for win9x and gets ip straight away.

2nite will try different model network card just incase and then notes form following link :  http://forums.contribs.org/index.php?topic=4860.msg16958#msg16958

full thread : http://forums.contribs.org/index.php?topic=4860.msg16958#msg16958


thanks

Title: Re: new install/dup nic's
Post by: Andres on October 28, 2002, 09:05:52 PM

Some cable modem providers will "marry" the MAC address of the network card to the cable modem, so, if you change network cards, you'll have to call your ISP and ask them to reset your modem ( I had to do that on mine ), just tell them that you changed computer.

Title: at last working !!
Post by: kan3 on October 28, 2002, 10:40:58 PM

swapped external network card to intel and works fine

damn me why i couldn't get working with identical cards, shame really as using nice fast/reliable 3com 3C905C-TX-M cards.


might have another play later this week.  for now off to try installing e-mail system, firewall monitor, virus checker etc etc

new toy, so much fun


thanks for help guys

Title: Re: new install/dup nic's
Post by: Paul on November 01, 2002, 05:32:58 PM

I have the same problem with the 3Com cards and Also Netgear FA310 or 311.

With the 3Com card I can only get access to the server not the internet, only difference is I am using a 3Com ISDN router.

Anyone any other ideas apart from changing NIC to Intel??

Paul