Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: Eduardo Rivero on January 17, 2003, 08:19:39 AM

Title: ServideLink-lib and Update 3 for e-smith 5.5
Post by: Eduardo Rivero on January 17, 2003, 08:19:39 AM

I have problems with my e-smith 5.5 and the update 3. I can not install because it give me an error like:

Check for package conflicts There are package conflicts with the SMEServer-5.5_Update3 blade
ServiceLink-lib >= 0.0.7-01 is needed by ServiceLink-freeswan-1.8.8-01

I was looking around by this library, but I could not found it,.

Any ideas please????

Title: Re: ServideLink-lib and Update 3 for e-smith 5.5
Post by: Rob on January 17, 2003, 11:35:53 AM

Same thing here.  Probably need an update #2.  I have #1 update done, then in the blades it jumps to #3.  Where is #2??

i have never seen a #2.  If you figure it out let me know.

Title: Re: ServideLink-lib and Update 3 for e-smith 5.5
Post by: Bob Todd on January 17, 2003, 02:49:15 PM

#2 wasnt a blade iirc and you have to go to the downloads area on the ftp to download it manually.

Title: Re: ServiceLink-lib and Update 3 for e-smith 5.5
Post by: Eduardo Rivero on January 17, 2003, 04:49:48 PM

I have just applied patch #2
It still having the same problem.
I did #2 like this:

rpm -Uvh --replacepkgs *.rpm
/sbin/e-smith/signal-event post-upgrade
/sbin/e-smith/signal-event reboot

Blade #1 or patch #1 was oportunately applied

Title: Re: ServiceLink-lib and Update 3 for e-smith 5.5
Post by: Bill Talcott on January 17, 2003, 05:15:45 PM

Perhaps you should contact your SME rep for support? Those of us using the developmental distribution don't even have access to the Blades anymore, so you probably won't get a whole lot of help here...

Title: Re: Broken update 3 for SME Server 5.5
Post by: Gordon Rowell on January 18, 2003, 03:53:42 AM

We're fixing the update and we'll put it on the FTP site soon.

Gordon

Title: Re: Broken update 3 for SME Server 5.5
Post by: Gordon Rowell on January 18, 2003, 05:58:21 AM

Gordon Rowell wrote:
>
> We're fixing the update and we'll put it on the FTP site soon.

The update has now been fixed. Please follow the instructions in:

    ftp://ftp.e-smith.com/pub/e-smith/updates/5.5/Update3/README

to apply the update.

Gordon