Koozali.org: home of the SME Server
Legacy Forums => General Discussion (Legacy) => Topic started by: Jim Danvers on February 17, 2003, 03:08:49 AM
-
Gents...
5.6 server cfg'd in gateway & server mode. Couple of pc's behind it using dhcp to get addresses. How can I tell what machine has what IP assigned - ie; I want to know who has what lease so that I can know which box to hop on (ssh) after ssh'ing into sme box from remote.
Does that make sense?
Thanks...
-=- jd -=-
-
Unless you have your SME configured to pass "static" IP thru dhcp you can't tell.
The easiest way is via the service-panel "Hostnames & Addresses". Enter your pc there using ip's from your dhcp-range AND the MAC / Ethernet-address of the pc's nic. dhcp will then always pass the same ip-address to the requesting pc.
hope this helps
jochen
-
Jochen Hoegerl wrote:
>
> Unless you have your SME configured to pass "static" IP thru
> dhcp you can't tell.
That's not entirely true. LANLord adds a panel to show what IPs have been assigned to what PCs. I have no idea whether it works with 5.6 or not.
-
try here:
http://www.edwardssystems.com/e-smith/
Cheers
Brian
-
Hey!!! ;) Thanks - I'll be sure to dnld that and give it a go when I get out of work and can get to my machine. Thanks!
-=- jd -=-
Brian Read wrote:
>
> try here:
>
> http://www.edwardssystems.com/e-smith/
>
> Cheers
>
> Brian
-
Just a followup - I just installed it - works great. Thanks again. ;)
-=- jd -=-
Brian Read wrote:
>
> try here:
>
> http://www.edwardssystems.com/e-smith/
>
> Cheers
>
> Brian