Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: KRS on July 31, 2003, 09:23:11 PM

Title: about pppoe....
Post by: KRS on July 31, 2003, 09:23:11 PM

How do i config the pppoe to my adsl (Telia Sweden)??

citat from manual
"If you are using ADSL and need PPP over Ethernet , choose Option 3. You will then be asked for the user name and password you use to connect to your ISP. Note that some ISPs require you to enter their domain name as well as your user name."

i have put the user/pass in the right fields but i cant get it to work.
have tried: USER@ISP.COM, only USER, then the password in the next page...

but still no connection.. :-(


Zyxel Prestige 645 (swedish telia adsl)
|
SME (6.0b2)
|
Netgear switch
|       |        |        |
pc#1 pc#2  pc#3  pc#4

Title: Re: about pppoe....
Post by: Ian on August 01, 2003, 05:40:39 AM

It should be the same as you use to login from a Windows box. Have you tried a direct connection using a Windows machine to check the ADSL is up and running?

Title: Re: about pppoe....
Post by: Jeff parson on August 01, 2003, 07:49:13 AM

We are running Dlink ADSL modem in PPPoE mode. We found that the modem had to be changed to a bridged modem and the it works fine

Title: Re: about pppoe....
Post by: KRS on August 01, 2003, 08:56:33 PM

Yes i have tried it on a win client and the adsl work....
but i cant get the sme to login at the auth-server so that i can use the connection...

Title: Re: about pppoe....
Post by: KRS on August 01, 2003, 08:58:50 PM

i cant even get the connection testing to work...  
in this moment i give the @!#$ in the rest of the network doesnt have internet...

Title: Re: about pppoe....
Post by: Anton on August 08, 2003, 03:52:43 AM

KRS what have you been doing to get adsl to work.
I have problems that i don't get any ip number from the isp (telia) when i use
ifconfig yhere is no ip number
??KRS wrote: