Topic: user-password removed?

[Steve Davis]

Has the web page for user password pages been removed
from 5.1.2? It works fine in 5.1 and 4.1.2

I look for a rpm to perhaps reinstall, and searched the docs to see if and why it had been removed. No luck.

[Terry Brummell]

Works on mine, try https://servername/user-password .

Steve Davis wrote:
>
> Has the web page for user password pages been removed
> from 5.1.2? It works fine in 5.1 and 4.1.2
>
> I look for a rpm to perhaps reinstall, and searched the docs
> to see if and why it had been removed. No luck.

[Steve Davis]

Terry Brummell wrote:
>
> Works on mine, try https://servername/user-password .
>
> Steve Davis wrote:
> >
> > Has the web page for user password pages been removed
> > from 5.1.2? It works fine in 5.1 and 4.1.2
> >
> > I look for a rpm to perhaps reinstall, and searched the docs
> > to see if and why it had been removed. No luck.

Sorry, I am referring to server-only mode.
So I would need,

http://www.domain.com/user-password/

It seems to have been disabled or removed from 5.1.2

[Terry Brummell]

When in Server Only mode doesn't it treat anything on the same subnet as the server as local, and anything on another subnet as external?  If you are on a different subnet then the server then this wouldn't allow access to the password page since it is an "internal" page.  Correct?  I'm guessing here, but we have a SME running here at work and I had difficulties connecting to it from other subnets until I allowed the I-Bay as "Entire Internet".
Hope this helps....

Terry

[Steve Davis]

Terry Brummell wrote:
>
> When in Server Only mode doesn't it treat anything on the
> same subnet as the server as local, and anything on another
> subnet as external?  If you are on a different subnet then
> the server then this wouldn't allow access to the password
> page since it is an "internal" page.  Correct?  I'm guessing
> here, but we have a SME running here at work and I had
> difficulties connecting to it from other subnets until I
> allowed the I-Bay as "Entire Internet".
> Hope this helps....
>
> Terry

Sorry Terry, that is not correct.
In all other versions of E-Smith, I have 4.1 and 5.1 running
you can get access to that page from any browser by typing
http://www.domain.com/user-password/

If you look in the admin pages, under Review Configuration
it even lists this site.

And, since it is a admin page, and not an iBay, you cannot change the
priviledges.

Thanks anyway, Steve

[Terry Brummell]

With the I-Bay I was just making the point between internal and external users when in server only mode.  
Are you on the same subnet as the server?  Have you tried accessing the password page from different subnets?  I just did it on my SME at work and it allows it from my 2K box on the same subnet, but doesn't allow the password page from a 2K box in the training department (different subnet).