Topic: ISDN Adapter

[Daley]

Hi All,

Just wish to know what is the best ISDN adapter for SME 5.5 and above?

Regards,
Daley

[Eerikki Peltokorpi]

Hello Daley.


If you want use full speed you have to have external ISDN modem. because sme doesn't suport 2 channels for internal isdn cards. At least i couldn't get it run properly. If you want only 1 channel to operate then you can have all most anykind of card becausse they use mostly same isdn prosessor. I did solve this internal-gard problem by installing another isdn routerbox wih www.fli4l.de onedisk router sofware.


Hope that this helps you.


Best regard

-Eerikki Peltokorpi-

[Ralf Hess]

Hi,

in the past I used a 'ACER T50' without any problems. No need for driver (unlike AVM Fritz!-Box ?), etc. It's possible to use 1 channel or automatic 2 channel.

Regards. Ralf

[daley]

Hi,

Is that means almost all the external / internal and as well as the USB ISDN modem is workable for SME 5.5?

Regards,
Daley

[guestHH]

I can confirm what Eerikki wrote. I have several setup's running like that.

Questions? e-mail me.

Regards,
guestHH

[Daley]

RequestedDeletion,

Thanks, what are the ISDN devices reckon by SME 5.5?

Regards,
Daley

[guestHH]

I used the internal Eicon Diva ISDN 2.0 card.

Here's a list supported by Hisax (core ISDN engine in SME)

Type              Required parameters (in addition to type and protocol)
----------------------------------------------------------------------
 1   Teles 16.0               irq, mem, io
 2   Teles  8.0               irq, mem
 3   Teles 16.3 (non PnP)     irq, io
 4   Creatix/Teles PnP        irq, io0 (ISAC), io1 (HSCX)
 5   AVM A1 (Fritz)           irq, io
 5   AVM (Fritz!Card Classic) irq, io
 6   ELSA PCC/PCF cards       io or nothing for autodetect (the iobase is required
                              only if you have more than one ELSA card in your PC)
 7   ELSA Quickstep 1000      irq, io  (from isapnp setup)
 8   Teles 16.3 PCMCIA        irq, io
 9   ITK ix1-micro Rev.2      irq, io  (from isapnp setup?)
10   ELSA PCMCIA              irq, io  (set with card manager)
11   Eicon.Diehl Diva ISA PnP irq, io
11   Eicon.Diehl Diva PCI     no parameter
12   ASUS COM ISDNLink        irq, io  (from isapnp setup)
13   HFC-2BS0 based cards     irq, io
14   Teles 16.3c PnP          irq, io
15   Sedlbauer Speed Card     irq, io
15   Sedlbauer PC/104         irq, io
15   Sedlbauer Speed PCI      no parameter
16   USR Sportster internal   irq, io
17   MIC card                 irq, io
18   ELSA Quickstep 1000PCI   no parameter
19   Compaq ISDN S0 ISA card  irq, io0, io1, io (from isapnp setup io=IO2)
20   NETjet PCI card          no parameter
21   Teles PCI                no parameter
22   Sedlbauer Speed Star (PCMCIA) irq, io (set with card manager)
24   Dr. Neuhaus Niccy PnP    irq, io0, io1 (from isapnp setup)
24   Dr. Neuhaus Niccy PCI    no parameter
25   Teles S0Box              irq, io (of the used lpt port)
26   AVM A1 PCMCIA (Fritz!)   irq, io (set with card manager)
27   AVM PnP (Fritz!PnP)      irq, io  (from isapnp setup)
27   AVM PCI (Fritz!PCI)      no parameter
28   Sedlbauer Speed Fax+     irq, io (from isapnp setup)
29   Siemens I-Surf 1.0       irq, io, memory (from isapnp setup)
30   ACER P10                 irq, io (from isapnp setup)
31   HST Saphir               irq, io
32   Telekom A4T              none
33   Scitel Quadro            subcontroller (4*S0, subctrl 1...4)
34   Gazel ISDN cards (ISA)   irq,io
34   Gazel ISDN cards (PCI)   none
35   HFC 2BDS0 PCI            none
36   W6692 based PCI cards    none
37   2BDS0 S+, SP/PCMCIA      irq,io (pcmcia must be set with cardmgr)

[daley]

RequestedDeletion,

Does the external Diva supported in SME?

Regards,
Daley

[guestHH]

Sorry but I don't know for the external one.

In the past there have been many topics in these forums about external ISDN modems. Try a search with 'external ISDN' on all dates.

[Eerikki Peltokorpi]

Hi Daley


What i know all external ISDN modems are suported, exept usb modems.
just use them as any other external modems and it will work out.


-Eerikki Peltokorpi-

[Daley]

Hi All,

Thank you for the posts.

Regards,
Daley