Hi there,
This has been posted in the general discussion list, but mabe this is the right place for this question.
I’ve upgraded my SME 5.5 to 5.6 beta 7 and have added all upgrades.
The upgrade ran nice, and after words, I’ve added an extra harddisk mounted as /dev/hdd – Slave on second IDE port.
It’s mainly for the use of ext3 file system, that I upgraded the system.
After the install, and the setup in the /etc/fstab file where the ekstra harddisk is mounted directly into an ibay,
I now gets a strange error in my admin mailbox, saying:
“Cannot query your quota for 'seti' on '/dev/hdd2' - Quota error (are you using NFS?): Not a standard file system”
The same error message comes on all the users on the system.
The funny thing is that I don’t have a partition called hdd2?
The command “fdisk /dev/hdd” then “p for print the partition table” says the following:
Disk /dev/hdd: 255 heads, 63 sectors, 7476 cylinders
Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hdd1 1 7476 60050938+ 83 Linux
As I see it, there is no hdd2 partition.
But if I do a “df” command the system says:
[root@server root]# df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/hdd2 39294220 4014420 33283728 11% /
/dev/hda1 15522 5816 8905 40% /boot
/dev/hdb 44327448 18679640 23396064 45% /home/e-smith/files/ibays/mp3/files
none 257148 0 257148 0% /dev/shm
/dev/hdd1 59106972 39383084 16721344 71% /home/e-smith/files/ibays/movies/files
Can anyone put me in the right direction?
/ Dennis
1 Replies
436 Views