no it is not with my dns registar because it was all working fine until i installed some rpms to help with a geeklog installation. Unfortunately it was a week before I realized it and a lot happened in that week.
Although it is a bit strange that when I do a nslookup on all of them it returns 64.202.167.129 but when I go to my registrar the accounts still forward correctly to 68.166.34.32 which is my static ip.
Here is my httpd.conf file if that helps:
#------------------------------------------------------------
# DO NOT MODIFY THIS FILE! It is updated automatically by the
# SME Server software. Instead, modify the source template in
# an /etc/e-smith/templates-custom directory. For more
# information, see http://www.e-smith.org/custom/
#
# copyright (C) 1999-2003 Mitel Networks Corporation
#------------------------------------------------------------
AccessConfig /dev/null
# BindAddress: You can support virtual hosts with this option. This option
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the VirtualHost directive.
#BindAddress *
# HostnameLookups: Log the names of clients or just their IP numbers
# e.g. www.apache.org (on) or 204.62.129.132 (off)
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on.
HostnameLookups off
# Port: The port the standalone listens to. For ports < 1023, you will
# need httpd to be run as root initially.
Port 80
ResourceConfig /dev/null
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.
ServerAdmin admin@boldwellies.com
# ServerRoot: The directory the server's config, error, and log files
# are kept in.
# NOTE! If you intend to place this on a NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation,
# you will save yourself a lot of trouble.
ServerRoot /etc/httpd
ServerTokens ProductOnly
# ServerType is either inetd, or standalone.
ServerType standalone
# If you are running from inetd, go to "ServerAdmin".
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# On SCO (ODT 3) use User nouser and Group nogroup
# On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group nobody on these systems!
User www
Group www
# ErrorLog: The location of the error log file. If this does not start
# with /, ServerRoot is prepended to it.
ErrorLog /var/log/httpd/error_log.20040501011201
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
#
# Example:
# LoadModule foo_module libexec/mod_foo.so
#
# Documentation for modules is in "/home/httpd/manual/mod" in HTML format.
#LoadModule mmap_static_module modules/mod_mmap_static.so
LoadModule env_module modules/mod_env.so
LoadModule config_log_module modules/mod_log_config.so
LoadModule agent_log_module modules/mod_log_agent.so
LoadModule referer_log_module modules/mod_log_referer.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule mime_module modules/mod_mime.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule status_module modules/mod_status.so
LoadModule info_module modules/mod_info.so
LoadModule includes_module modules/mod_include.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule dir_module modules/mod_dir.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule asis_module modules/mod_asis.so
LoadModule imap_module modules/mod_imap.so
LoadModule action_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule proxy_module modules/libproxy.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule anon_auth_module modules/mod_auth_anon.so
#LoadModule dbm_auth_module modules/mod_auth_dbm.so
LoadModule db_auth_module modules/mod_auth_db.so
LoadModule digest_module modules/mod_digest.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule example_module modules/mod_example.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
# Extra Modules
#LoadModule php_module modules/mod_php.so
#LoadModule php3_module modules/libphp3.so
#LoadModule perl_module modules/libperl.so
LoadModule external_auth_module modules/mod_auth_external.so
LoadModule php4_module /usr/lib/apache/libphp4.so
LoadModule ssl_module /usr/lib/apache/libssl.so
# Reconstruction of the complete module list from all available modules
# (static and shared ones) to achieve correct module execution order.
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
#AddModule mod_mmap_static.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_log_agent.c
AddModule mod_log_referer.c
#AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
#AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_proxy.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
#AddModule mod_auth_dbm.c
AddModule mod_auth_db.c
AddModule mod_auth_external.c
AddModule mod_digest.c
#AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_usertrack.c
#AddModule mod_example.c
#AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
# Extra Modules
#AddModule mod_php.c
#AddModule mod_php3.c
#AddModule mod_perl.c
AddModule mod_php4.c
AddModule mod_ssl.c
AddExternalAuth pwauth /usr/lib/apache/pwauth
SetExternalAuthMethod pwauth pipe
Listen 0.0.0.0:80
##########################################################
## SSL Global Context Configuration
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts
## (unless overridden by virtual hosts)
##
<IfModule mod_ssl.c>
Listen 0.0.0.0:443
SSLEngine off
SSLCertificateFile /home/e-smith/ssl.crt/webby.boldwellies.com.crt
SSLCertificateKeyFile /home/e-smith/ssl.key/webby.boldwellies.com.key
SSLPassPhraseDialog builtin
SSLSessionCache dbm:state/ssl_scache
SSLSessionCacheTimeout 300
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
SSLMutex file:state/ssl_mutex
SSLRandomSeed startup file:/dev/urandom 512
SSLRandomSeed connect builtin
SSLLog /var/log/httpd/ssl_engine_log.20040501011201
SSLLogLevel info
SSLProtocol all
</IfModule>
#
# END OF SSL GLOBAL CONTEXT CONFIGURATION
#############################################
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#
#LockFile /var/lock/httpd.lock
# PidFile: The file the server should log its pid to
PidFile /var/run/httpd.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file is created when you run Apache) then you *must* ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile /var/run/httpd.scoreboard
# CacheNegotiatedDocs: By default, Apache sends Pragma: no-cache with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a url that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGIs.
UseCanonicalName off
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined_virtual
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location of the access logfile (Common Logfile Format).
# If this does not start with /, ServerRoot is prepended to it.
# CustomLog logs/access_log common
CustomLog /var/log/httpd/access_log.20040501011201 combined_virtual
# If you would like to have an agent and referer logfile uncomment the
# following directives.
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
# If you prefer a single logfile with access, agent and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access_log combined
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We reccomend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request
KeepAliveTimeout 15
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# Unix with it as it spirals down...
MaxClients 150
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies.
# The child will exit so as to avoid problems after prolonged use when
# Apache (and maybe the libraries it uses) leak. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries.
MaxRequestsPerChild 100
# Proxy Server directives. Uncomment the following line to
# enable the proxy server:
#ProxyRequests On
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e. use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
ServerName www.boldwellies.com
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. These values are probably OK for most sites ---
MinSpareServers 8
MaxSpareServers 20
# Number of servers to start --- should be a reasonable ballpark figure.
StartServers 10
# Timeout: The number of seconds before receives and sends time out
Timeout 300
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
DirectoryIndex index.php index.htm index.html index.shtml index.cgi
DirectoryIndex index.htm index.html index.shtml index.cgi index.php index.php3 index.phtml
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot /home/e-smith/files/ibays/Primary/html
# FancyIndexing is whether you want fancy directory indexing or standard
FancyIndexing on
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is recieved.
# UserDir public_html
# AddIcon tells the server which icon to show for different files or filename
# extensions
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# AddDescription allows you to place a short description after a file in
# server-generated indexes.
# Format: AddDescription "description" filename
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
# DefaultType is the default MIME type for documents which the server
# cannot find the type of from filename extensions.
DefaultType text/plain
# IndexIgnore is a set of filenames which directory indexing should ignore
# Format: IndexIgnore name1 name2...
IndexIgnore .??* *~ *# HEADER* README* RCS
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig /etc/mime.types
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
AddEncoding x-compress Z
AddEncoding x-gzip gz
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
<IfModule mod_php4.c>
AddIcon /icons/php4.gif .php3 .php4 .php .phtml
AddIcon /icons/phps.gif .phps
</IfModule>
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand. Note that the suffix does not have to be the same
# as the language keyword --- those with documents in Polish (whose
# net-standard language code is pl) may wish to use "AddLanguage pl .po"
# to avoid the ambiguity with the common suffix for perl scripts.
AddLanguage en .en
AddLanguage fr .fr
AddLanguage de .de
AddLanguage da .da
AddLanguage el .el
AddLanguage it .it
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference.
LanguagePriority en fr de
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
# Format: AddType type/subtype ext1
# For example, the PHP3 module (not part of the Apache distribution)
# will typically use:
#AddType application/x-httpd-php3 .php3
#AddType application/x-httpd-php3-source .phps
# The following is for PHP/FI (PHP2):
#AddType application/x-httpd-php .phtml
# Fix up default type for .exe files.
AddType application/octet-stream .exe
# Add type for Netscape proxy autoconfiguration
AddType application/x-ns-proxy-autoconfig .pac
AddType image/png .png
# Fix up default type for .rpm files.
AddType application/octet-stream .rpm
# To use server-parsed HTML files
AddType text/html .shtml
AddType application/x-pkcs7-crl .crl
AddType application/x-x509-ca-cert .crt
# The following directives disable keepalives and HTTP header flushes.
# The first directive disables it for Netscape 2.x and browsers which
# spoof it. There are known problems with these.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# Format: AddHandler action-name ext1
# To use CGI scripts:
AddHandler cgi-script .cgi
AddHandler server-parsed .shtml
# If you wish to use server-parsed imagemap files, use
AddHandler imap-file map
NameVirtualHost 0.0.0.0:80
NameVirtualHost 0.0.0.0:443
<VirtualHost 0.0.0.0:80>
ServerName www.boldwellies.com
ServerAlias boldwellies.com webby.boldwellies.com
DocumentRoot /home/e-smith/files/ibays/boldwellies/html
ScriptAlias /cgi-bin /home/e-smith/files/ibays/boldwellies/cgi-bin
Alias /files /home/e-smith/files/ibays/boldwellies/files
# lloydus ibay (lloydus)
ScriptAlias /lloydus/cgi-bin /home/e-smith/files/ibays/lloydus/cgi-bin
Alias /lloydus/files /home/e-smith/files/ibays/lloydus/files
Alias /lloydus /home/e-smith/files/ibays/lloydus/html
# Primary ibay (Primary i-bay)
ScriptAlias /Primary/cgi-bin /home/e-smith/files/ibays/Primary/cgi-bin
Alias /Primary/files /home/e-smith/files/ibays/Primary/files
Alias /Primary /home/e-smith/files/ibays/Primary/html
# poopily ibay (poopily)
ScriptAlias /poopily/cgi-bin /home/e-smith/files/ibays/poopily/cgi-bin
Alias /poopily/files /home/e-smith/files/ibays/poopily/files
Alias /poopily /home/e-smith/files/ibays/poopily/html
# skipping SSL directives
# skipping ProxyPass directives
RewriteEngine on
RewriteRule ^/webmail https://%{HTTP_HOST}/webmail [L,R]
Alias /horde /home/httpd/html/horde
<Location ~ "/horde/*">
RequireSSL on
</Location>
# alias for Apache icons
Alias /icons/ /var/www/icons/
# Alias for server resources
Alias /server-resources/ /home/e-smith/files/server-resources/
</VirtualHost>
<VirtualHost 0.0.0.0:443>
ServerName www.boldwellies.com
ServerAlias boldwellies.com webby.boldwellies.com
DocumentRoot /home/e-smith/files/ibays/boldwellies/html
ScriptAlias /cgi-bin /home/e-smith/files/ibays/boldwellies/cgi-bin
Alias /files /home/e-smith/files/ibays/boldwellies/files
# lloydus ibay (lloydus)
ScriptAlias /lloydus/cgi-bin /home/e-smith/files/ibays/lloydus/cgi-bin
Alias /lloydus/files /home/e-smith/files/ibays/lloydus/files
Alias /lloydus /home/e-smith/files/ibays/lloydus/html
# Primary ibay (Primary i-bay)
ScriptAlias /Primary/cgi-bin /home/e-smith/files/ibays/Primary/cgi-bin
Alias /Primary/files /home/e-smith/files/ibays/Primary/files
Alias /Primary /home/e-smith/files/ibays/Primary/html
# poopily ibay (poopily)
ScriptAlias /poopily/cgi-bin /home/e-smith/files/ibays/poopily/cgi-bin
Alias /poopily/files /home/e-smith/files/ibays/poopily/files
Alias /poopily /home/e-smith/files/ibays/poopily/html
# SSL Directives
SSLEngine on
# ProxyPass executes a module which relays requests to another server
# We use it to allow transparent access to the admin instance of the
# web server.
ProxyPass /server-brand http://127.0.0.1:980/server-brand/
<Location /server-brand>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /e-smith-brand http://127.0.0.1:980/e-smith-brand/
<Location /e-smith-brand>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
# ProxyPass executes a module which relays requests to another server
# We use it to allow transparent access to the admin instance of the
# web server.
ProxyPass /e-smith-common http://127.0.0.1:980/server-common/
<Location /e-smith-common>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /server-common http://127.0.0.1:980/server-common/
<Location /server-common>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /common http://127.0.0.1:980/common/
<Location /common>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
# ProxyPass executes a module which relays requests to another server
# We use it to allow transparent access to the admin instance of the
# web server.
ProxyPass /e-smith-manager http://127.0.0.1:980/e-smith-manager/
<Location /e-smith-manager>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /server-manager http://127.0.0.1:980/server-manager/
<Location /server-manager>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
# ProxyPass executes a module which relays requests to another server
# We use it to allow transparent access to the admin instance of the
# web server.
ProxyPass /e-smith-password http://127.0.0.1:980/user-password/
<Location /e-smith-password>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /user-password http://127.0.0.1:980/user-password/
<Location /user-password>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
Alias /webmail /home/httpd/html/horde/imp
Alias /horde /home/httpd/html/horde
# alias for Apache icons
Alias /icons/ /var/www/icons/
# Alias for server resources
Alias /server-resources/ /home/e-smith/files/server-resources/
</VirtualHost>
<VirtualHost 0.0.0.0:80>
ServerName www.lloydus.net
ServerAlias lloydus.net webby.lloydus.net
DocumentRoot /home/e-smith/files/ibays/lloydus/html
ScriptAlias /cgi-bin /home/e-smith/files/ibays/lloydus/cgi-bin
Alias /files /home/e-smith/files/ibays/lloydus/files
# skipping SSL directives
# skipping ProxyPass directives
RewriteEngine on
RewriteRule ^/webmail https://%{HTTP_HOST}/webmail [L,R]
Alias /horde /home/httpd/html/horde
<Location ~ "/horde/*">
RequireSSL on
</Location>
# alias for Apache icons
Alias /icons/ /var/www/icons/
# Alias for server resources
Alias /server-resources/ /home/e-smith/files/server-resources/
</VirtualHost>
<VirtualHost 0.0.0.0:443>
ServerName www.lloydus.net
ServerAlias lloydus.net webby.lloydus.net
DocumentRoot /home/e-smith/files/ibays/lloydus/html
ScriptAlias /cgi-bin /home/e-smith/files/ibays/lloydus/cgi-bin
Alias /files /home/e-smith/files/ibays/lloydus/files
# SSL Directives
SSLEngine on
# ProxyPass executes a module which relays requests to another server
# We use it to allow transparent access to the admin instance of the
# web server.
ProxyPass /server-brand http://127.0.0.1:980/server-brand/
<Location /server-brand>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /e-smith-brand http://127.0.0.1:980/e-smith-brand/
<Location /e-smith-brand>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
# ProxyPass executes a module which relays requests to another server
# We use it to allow transparent access to the admin instance of the
# web server.
ProxyPass /e-smith-common http://127.0.0.1:980/server-common/
<Location /e-smith-common>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /server-common http://127.0.0.1:980/server-common/
<Location /server-common>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /common http://127.0.0.1:980/common/
<Location /common>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
# ProxyPass executes a module which relays requests to another server
# We use it to allow transparent access to the admin instance of the
# web server.
ProxyPass /e-smith-manager http://127.0.0.1:980/e-smith-manager/
<Location /e-smith-manager>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /server-manager http://127.0.0.1:980/server-manager/
<Location /server-manager>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
# ProxyPass executes a module which relays requests to another server
# We use it to allow transparent access to the admin instance of the
# web server.
ProxyPass /e-smith-password http://127.0.0.1:980/user-password/
<Location /e-smith-password>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /user-password http://127.0.0.1:980/user-password/
<Location /user-password>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
Alias /webmail /home/httpd/html/horde/imp
Alias /horde /home/httpd/html/horde
# alias for Apache icons
Alias /icons/ /var/www/icons/
# Alias for server resources
Alias /server-resources/ /home/e-smith/files/server-resources/
</VirtualHost>
<VirtualHost 0.0.0.0:80>
ServerName www.poopily.com
ServerAlias poopily.com webby.poopily.com
DocumentRoot /home/e-smith/files/ibays/poopily/html
ScriptAlias /cgi-bin /home/e-smith/files/ibays/poopily/cgi-bin
Alias /files /home/e-smith/files/ibays/poopily/files
# skipping SSL directives
# skipping ProxyPass directives
RewriteEngine on
RewriteRule ^/webmail https://%{HTTP_HOST}/webmail [L,R]
Alias /horde /home/httpd/html/horde
<Location ~ "/horde/*">
RequireSSL on
</Location>
# alias for Apache icons
Alias /icons/ /var/www/icons/
# Alias for server resources
Alias /server-resources/ /home/e-smith/files/server-resources/
</VirtualHost>
<VirtualHost 0.0.0.0:443>
ServerName www.poopily.com
ServerAlias poopily.com webby.poopily.com
DocumentRoot /home/e-smith/files/ibays/poopily/html
ScriptAlias /cgi-bin /home/e-smith/files/ibays/poopily/cgi-bin
Alias /files /home/e-smith/files/ibays/poopily/files
# SSL Directives
SSLEngine on
# ProxyPass executes a module which relays requests to another server
# We use it to allow transparent access to the admin instance of the
# web server.
ProxyPass /server-brand http://127.0.0.1:980/server-brand/
<Location /server-brand>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /e-smith-brand http://127.0.0.1:980/e-smith-brand/
<Location /e-smith-brand>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
# ProxyPass executes a module which relays requests to another server
# We use it to allow transparent access to the admin instance of the
# web server.
ProxyPass /e-smith-common http://127.0.0.1:980/server-common/
<Location /e-smith-common>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /server-common http://127.0.0.1:980/server-common/
<Location /server-common>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /common http://127.0.0.1:980/common/
<Location /common>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
# ProxyPass executes a module which relays requests to another server
# We use it to allow transparent access to the admin instance of the
# web server.
ProxyPass /e-smith-manager http://127.0.0.1:980/e-smith-manager/
<Location /e-smith-manager>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /server-manager http://127.0.0.1:980/server-manager/
<Location /server-manager>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
# ProxyPass executes a module which relays requests to another server
# We use it to allow transparent access to the admin instance of the
# web server.
ProxyPass /e-smith-password http://127.0.0.1:980/user-password/
<Location /e-smith-password>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /user-password http://127.0.0.1:980/user-password/
<Location /user-password>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
Alias /webmail /home/httpd/html/horde/imp
Alias /horde /home/httpd/html/horde
# alias for Apache icons
Alias /icons/ /var/www/icons/
# Alias for server resources
Alias /server-resources/ /home/e-smith/files/server-resources/
</VirtualHost>
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory>
Options None
AllowOverride None
order deny,allow
deny from all
allow from none
</Directory>
# Horde specific configuration files.
<Directory /home/httpd/html/horde>
Options Indexes Includes FollowSymLinks
AllowOverride None
order allow,deny
allow from all
AddType application/x-httpd-php .php .php3
php_value include_path '.:/usr/share/pear'
# php_value auto_prepend_file /home/httpd/horde-phplib/prepend.php3
php_flag magic_quotes_gpc off
php_flag track_vars on
</Directory>
<Directory /home/httpd/html/horde/config>
order deny,allow
deny from all
</Directory>
<Directory /home/httpd/html/horde/lib>
order deny,allow
deny from all
</Directory>
<Directory /home/httpd/html/horde/locale>
order deny,allow
deny from all
</Directory>
<Directory /home/httpd/html/horde/templates>
order deny,allow
deny from all
</Directory>
<Directory /home/httpd/html/horde/admin>
order deny,allow
deny from all
</Directory>
# IMP specific access configuration
<Directory /home/httpd/html/horde/imp/config>
order deny,allow
deny from all
</Directory>
<Directory /home/httpd/html/horde/imp/lib>
order deny,allow
deny from all
</Directory>
<Directory /home/httpd/html/horde/imp/locale>
order deny,allow
deny from all
</Directory>
<Directory /home/httpd/html/horde/imp/templates>
order deny,allow
deny from all
</Directory>
# Server resources access configuration
<Directory /home/e-smith/files/server-resources>
Options +Indexes
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Directory>
# IMP specific access configuration
<Directory /home/httpd/html/horde/turba/config>
order deny,allow
deny from all
</Directory>
<Directory /home/httpd/html/horde/turba/lib>
order deny,allow
deny from all
</Directory>
<Directory /home/httpd/html/horde/turba/locale>
order deny,allow
deny from all
</Directory>
<Directory /home/httpd/html/horde/turba/templates>
order deny,allow
deny from all
</Directory>
# Administration: phpMyAdmin
Alias /phpmyadmin /opt/administration/phpmyadmin
<Directory /opt/administration/phpmyadmin>
RequireSSL on
Options -Indexes
AllowOverride None
order deny,allow
deny from all
allow from all
AuthName "phpMyAdmin"
AuthType Basic
AuthExternal pwauth
require user admin
Satisfy all
AddType application/x-httpd-php .php .php3
php_flag magic_quotes_gpc on
php_flag track_vars on
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#------------------------------------------------------------
# primary directories
#------------------------------------------------------------
<Directory /etc/e-smith/web/common>
AllowOverride None
order deny,allow
deny from all
allow from all
</Directory>
<Directory /home/e-smith/files/ibays/Primary/html>
Options Indexes Includes
Options +Includes
AddType application/x-httpd-php .php .php3 .phtml
AllowOverride None
order deny,allow
deny from all
allow from all
</Directory>
<Directory /home/e-smith/files/manager/html>
Options Indexes Includes ExecCGI
AllowOverride None
order deny,allow
deny from all
allow from all
</Directory>
<Directory /var/www/icons>
Options Indexes Includes
AllowOverride None
order deny,allow
deny from all
allow from all
</Directory>
<Directory /home/e-smith/files/ibays/Primary/cgi-bin>
Options ExecCGI
AllowOverride None
order deny,allow
deny from all
allow from all
</Directory>
<Directory /home/e-smith/files/manager/cgi-bin>
Options ExecCGI
AllowOverride None
order deny,allow
deny from all
allow from all
</Directory>
<Directory /home/e-smith/files/ibays/Primary/files>
AllowOverride None
order deny,allow
deny from all
allow from all
</Directory>
#------------------------------------------------------------
# Information bay directories
#------------------------------------------------------------
#------------------------------------------------------------
# Primary ibay directories (Primary i-bay)
#------------------------------------------------------------
<Directory /home/e-smith/files/ibays/Primary/html>
Options Indexes
Options +Includes
AllowOverride None
order deny,allow
deny from all
allow from all
</Directory>
<Directory /home/e-smith/files/ibays/Primary/cgi-bin>
Options ExecCGI
AllowOverride None
order deny,allow
deny from all
allow from all
</Directory>
<Directory /home/e-smith/files/ibays/Primary/files>
AllowOverride None
order deny,allow
deny from all
allow from all
</Directory>
#------------------------------------------------------------
# boldwellies ibay directories (boldwellies)
#------------------------------------------------------------
<Directory /home/e-smith/files/ibays/boldwellies/html>
Options Indexes
Options +Includes
AllowOverride None
order deny,allow
deny from all
allow from all
</Directory>
<Directory /home/e-smith/files/ibays/boldwellies/cgi-bin>
Options ExecCGI
AllowOverride None
order deny,allow
deny from all
allow from all
</Directory>
<Directory /home/e-smith/files/ibays/boldwellies/files>
AllowOverride None
order deny,allow
deny from all
allow from all
</Directory>
#------------------------------------------------------------
# lloydus ibay directories (lloydus)
#------------------------------------------------------------
<Directory /home/e-smith/files/ibays/lloydus/html>
Options Indexes
Options +Includes
AllowOverride None
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
AuthName "lloydus"
AuthType Basic
AuthExternal pwauth
require user lloydus
Satisfy any
</Directory>
<Directory /home/e-smith/files/ibays/lloydus/cgi-bin>
Options ExecCGI
AllowOverride None
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
AuthName "lloydus"
AuthType Basic
AuthExternal pwauth
require user lloydus
Satisfy any
</Directory>
<Directory /home/e-smith/files/ibays/lloydus/files>
AllowOverride None
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
AuthName "lloydus"
AuthType Basic
AuthExternal pwauth
require user lloydus
Satisfy any
</Directory>
#------------------------------------------------------------
# poopily ibay directories (poopily)
#------------------------------------------------------------
<Directory /home/e-smith/files/ibays/poopily/html>
Options Indexes
<FilesMatch "\.(php|php3|phtml)$">
order deny,allow
Deny from all
</FilesMatch>
Options +IncludesNOEXEC
AllowOverride None
order deny,allow
deny from all
allow from all
</Directory>
<Directory /home/e-smith/files/ibays/poopily/cgi-bin>
AllowOverride None
order deny,allow
deny from all
allow from all
</Directory>
<Directory /home/e-smith/files/ibays/poopily/files>
AllowOverride None
order deny,allow
deny from all
allow from all
</Directory>
ProxyPass /server-brand http://127.0.0.1:980/server-brand/
<Location /server-brand>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /e-smith-brand http://127.0.0.1:980/e-smith-brand/
<Location /e-smith-brand>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /e-smith-common http://127.0.0.1:980/server-common/
<Location /e-smith-common>
order deny,allow
deny from all
allow from all
</Location>
ProxyPass /server-common http://127.0.0.1:980/server-common/
<Location /server-common>
order deny,allow
deny from all
allow from all
</Location>
ProxyPass /common http://127.0.0.1:980/common/
<Location /common>
order deny,allow
deny from all
allow from all
</Location>
ProxyPass /e-smith-manager http://127.0.0.1:980/e-smith-manager/
<Location /e-smith-manager>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /server-manager http://127.0.0.1:980/server-manager/
<Location /server-manager>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /e-smith-password http://127.0.0.1:980/user-password/
<Location /e-smith-password>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
ProxyPass /user-password http://127.0.0.1:980/user-password/
<Location /user-password>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
<Directory /home/e-smith/files/ibays/lloydus/html>
AddType application/x-httpd-php .php .php3 .phtml
AddType application/x-httpd-php-source .phps
php_admin_value open_basedir /
</Directory>
<Directory /home/e-smith/files/ibays/Primary/html>
AddType application/x-httpd-php .php .php3 .phtml
AddType application/x-httpd-php-source .phps
php_admin_value open_basedir /home/e-smith/files/ibays/Primary
</Directory>
<Directory /home/e-smith/files/ibays/boldwellies/html>
AddType application/x-httpd-php .php .php3 .phtml
AddType application/x-httpd-php-source .phps
php_admin_value open_basedir /
</Directory>
Alias /wpad.dat /etc/httpd/conf/proxy/proxy.pac
<Location /wpad.dat>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
Alias /proxy.pac /etc/httpd/conf/proxy/proxy.pac
<Location /proxy.pac>
order deny,allow
deny from all
allow from 127.0.0.1 192.168.1.0/255.255.255.0
</Location>
9 Replies
2760 Views