Koozali.org: home of the SME Server

Counterstrike

Offline Troels

  • ***
  • 48
  • +0/-0
Counterstrike
« on: November 21, 2004, 08:16:20 PM »
Hi all, i have succesfully installed a counter strike server onto the sme server 6.0.1 it preforms great, but i'm not able to acess the server from the outside. The question is how do i open the ports on server, i'm aware of the security risks and all, still want to do it :o). I have tried the port forwarding pannel, and then forwarded the ports to the machine itself, it doesn't work??
Regards Troels

Offline kruhm

  • *
  • 680
  • +0/-0
Counterstrike
« Reply #1 on: November 22, 2004, 05:01:10 PM »
you need to give more details. How is your network setup? Server/gateway or only server. Your problem may lay outside of the sme box but rather on your router or modem.

Offline Troels

  • ***
  • 48
  • +0/-0
Configuration!
« Reply #2 on: November 22, 2004, 05:21:30 PM »
Networking Parameters
Server Mode servergateway
Local IP address / subnet mask 172.16.0.1/255.255.255.0
External IP address / subnet mask
xxxxxxxxxxxxx/255.255.254.0
Gateway xxxxxxxxxxxxxx
Additional local networks 172.16.0.0/255.255.255.0
DHCP server enabled
Beginning of DHCP address range 172.16.0.65
End of DHCP address range 172.16.0.250
Server names
DNS server 172.16.0.1
Web server xxxxxxxxxxxxxxxxx
Proxy server proxy.xxxxxxxx:3128
FTP server ftp.xxxxxxxxx
SMTP, POP, and IMAP mail servers mail.xxxxxxxx
Domain information
Primary domain xxxxxxxxx
Virtual domains xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxxxxx
xxxxxxxxxxxxx
Primary web site http://www.xxxxxxxxxxx
Server manager http://wnsme60/server-manager/
User password panel http://wnsme60/user-password/
Email Addresses
useraccount@firstname.lastname@xxxxxx
firstname_lastname@xxxxxxxxxx

The server is not behinde any router, and the isp is not blocking any ports. I have sucessfully ran a server installed onto a redhat 9.0 where i configured an iptables script of my own, so i know for sure it can work. Hope this provides the information needed.
Regards Troels

policymap

counterstrike
« Reply #3 on: November 23, 2004, 03:29:42 PM »
use the port opening contrib. Knuddi has one here

http://sme.swerts-knudsen.dk/downloads/dmc-mitel-portopening-0.0.1-4.noarch.rpm

how did you install the counterstrike server? is there a contrib?

regards
vj

Offline Appesteijn

  • ***
  • 62
  • +0/-0
Counterstrike
« Reply #4 on: November 24, 2004, 01:49:13 PM »
I worked on my system with the portopening contrib (opening port 27015) and adding the +ip xxx.xxx.xxx.xxx (your external ip) behind ./hlds_l
............

Offline Troels

  • ***
  • 48
  • +0/-0
Test
« Reply #5 on: November 24, 2004, 11:16:08 PM »
Hi, i will test it tomorrow so far the installation of the rpm worked "didn't repport any errors". Someting is strange why is the portopening tab placed under unknown ???
Regards Troels

Offline chris burnat

  • *****
  • 1,135
  • +2/-0
    • http://www.burnat.com
Counterstrike
« Reply #6 on: November 25, 2004, 09:57:22 AM »
"Someting is strange why is the portopening tab placed under unknown ???"
try : /etc/e-smith/events/actions/navigation-conf
- chris
If it does not work out of the box, please fill in a Bug Report @ Bugzilla (http://bugs.contribs.org)  - check: http://wiki.contribs.org/Bugzilla_Help .  Thanks.

drywalldude

counterstrike contrib
« Reply #7 on: December 01, 2004, 10:56:08 PM »
This is one of the projects I'm about to do, I have a sme server behind a sme server/gateway the port forwarding should work fine for this, I really woul appreciate a post of a contrib or how to of the steam server and does this include condition zero