Topic: Crash under installation

[svksvk]

After the format /boot sequence the installation crashes. I can see "the package installation bar" but black text says:

"install exited abnormally -- received signal 11"

Using SME 6.5RC1 i386.
Same error on 6.0.1 though.

Hardware:
AsRock K7S41GX motherboard (newest bios revision (2.00)) Onboard lan, sound & graphics.
AMD Sempron 2400+
256 MB ram. Unknown model.
80 GB harddrive.
3com 3c509 adapter (PCI)

I've disabled lan, serial and parrallel ports, sound but still no luck.

[Damian]

Suspect the hardware. Does memtest86 show any RAM issues? Create a bootable CD from ISO at ultimatebootcd.com and try it.
Damian

[svksvk]

Ok. I'll try that later today.

But the computer has run Win2000 server for a longer period of time without any problems.

Thanks.

[svksvk]

I've tested with memtest, and the burn-in test on the ultimatebootcd. But no errors. I can't the the harddrive cause it's an Excelstor and they haven't got an test utility.

Other ideas?

[Damian]

Only other thing I can think of is that the ISO didn't burn correctly. I've seen that happen. Fixed by using a different brand.
I have no experience of 6.5 (yet) but you might want to verify the ISO checksum when you burn it (against the published checksum on the download site).
Damian