Upgrading to SME 7 with Backup2ws

Troels

48
+0/-0

Upgrading to SME 7 with Backup2ws

« on: May 04, 2006, 11:32:54 PM »

Hi Everyone,

My plan for upgrading from 6.1 to 7.0 is to change the hardware platform aswell because it's old and proberly needs to be changed sometime soon anyway. So here is what I have tried i to do.

1. Make an emergency 911 backup, using backup2ws on old server.

2. Install fresh SME 6.1 on new hardware.

3. Do a restore using backup2ws on the new server.

The problem:

end of old server /var/log/backup2ws/911.log file (This seems fine)

Adding /root/dmc-mitel-backup2ws-0.0.1-14.noarch.rpm OK
Adding /root/rar-3.1.0-1dmc.i386.rpm OK
Adding /root/smeserver-backup2ws-0.0.1-22dmay.noarch.rpm OK
Adding /root/hpasm-7.4.0-56.rhel4.i386.rpm OK
Adding /root/.viminfo OK
Done

end of new server /var/log/backup2ws/restore.log (seems far from ok)

Extracting /root/descriptions.txt OK
Extracting /root/dmc-mitel-backup2ws-0.0.1-14.noarch.rpm OK
Extracting /root/rar-3.1.0-1dmc.i386.rpm OK
Extracting /root/smeserver-backup2ws-0.0.1-22dmay.noarch.rpm OK
Extracting /root/hpasm-7.4.0-56.rhel4.i386.rpm OK
Extracting /root/.viminfo OK
Total errors: 39013

Ok here is what I have cheked, the version of the backup2ws is the same on both servers.

Old server:

[root@lesme60 .ssh]# rpm -qa | grep backup
smeserver-backup2ws-0.0.1-22dmay
flexbackup-1.1.7-1es
e-smith-backup-1.12.1-02
e-smith-flexbackup-1.8.0-01

New server:

[root@lesme601 backup2ws]# rpm -qa | grep backup
flexbackup-1.1.7-1es
e-smith-backup-1.12.1-02
e-smith-flexbackup-1.8.0-01
smeserver-backup2ws-0.0.1-22dmay

The idea was to upgrade the new servers 6.1 to 7.0 but thats no good when the restore job didn't complete succesfully.

Any help would be much appreciated

Logged