Backup to tape fails (backup failed

** This may or may not have anything to do with an upgrade to 7.1.2 but the tape backup was working perfectly prior to the upgrade. **

This is what my daily email used to look like:

Quote

flexbackup version 1.2.1 (http://flexbackup.sourceforge.net)
/etc/flexbackup.conf syntax OK

$keyfile not found in config: default=00-index-key
$buffer_fill_pct not found in config: default=75
$buffer_pause_usec not found in config: default=100
|------------------------------------------------------------
| Checking 'buffer' on this machine... Ok
| Checking /bin/sh on this machine... bash1
|------------------------------------------------------------
| Doing level 0 backup of set all using tar
| All sets = full (1 tapes)
| Rewinding & erasing tape...
| Creating index key 200703170200
| Backup set "full" (/)
| Tape #0
|------------------------------------------------------------
SCSI 2 tape drive:
File number=1, block number=0, partition=0.
Tape block size 0 bytes. Density code 0x26 (DDS-4 or QIC-4GB).
Soft error count since last status=0
General status bits on (81010000):
EOF ONLINE IM_REP_EN
|------------------------------------------------------------
| File number 1, tape index 200703170200
| Backup of: /
| Date of this level 0 backup: Sat Mar 17 02:00:19 2007
| Date of last level 0 backup: the epoch
|------------------------------------------------------------
| cd "/" && /tmp/collectexit.31000.sh find . -depth -xdev ! -type s ! \
| -regex "news/articles" ! -regex ".*~"$ -print0 | \
| /tmp/collectexit.31000.sh tar --create --null --files-from=- \
| --ignore-failed-read --same-permissions --no-recursion --totals --label \
| "level 0 / Sat Mar 17 02:00:19 2007 tar+gzip from r011" --sparse \
| --atime-preserve -b 64 --file - | /tmp/collectexit.31000.sh gzip -4 | \
| /tmp/collectexit.31000.sh buffer -m 20m -p 75 -s 32k -t -u 100 -B -o \
| "/dev/nst0"
| [ ! -e /tmp/exitstatus.31000 ]
|------------------------------------------------------------
tar: ./tmp/clamav-6594b6790465aeed/nocomment.html: file changed as we read it
tar: ./tmp/clamav-6594b6790465aeed/comment.html: Warning: Cannot stat: No such file or directory
tar: ./tmp/clamav-6594b6790465aeed: Warning: Cannot stat: No such file or directory
Total bytes written: 18298601472 (18GiB, 2.5MiB/s)
Kilobytes Out 14057728
|------------------------------------------------------------
| Backup start: Sat Mar 17 02:00:19 2007
| Backup end: Sat Mar 17 03:58:43 2007
|------------------------------------------------------------
SCSI 2 tape drive:
File number=2, block number=0, partition=0.
Tape block size 0 bytes. Density code 0x26 (DDS-4 or QIC-4GB).
Soft error count since last status=0
General status bits on (81010000):
EOF ONLINE IM_REP_EN
|------------------------------------------------------------
| Rewinding...
| Removing old level 0 log of all (dated 200703160200)
| Compressing log (all.0.200703170200.gz)
| Linking all.latest.gz -> all.0.200703170200.gz
|------------------------------------------------------------

File Contents (tape index 200703170200)
---------------------------------------------
0 <tape index key>
1 level 0 / Sat Mar 17 02:00:19 2007 tar+gzip from r011

Now I get this:

Quote

flexbackup version 1.2.1 (http://flexbackup.sourceforge.net)
/etc/flexbackup.conf syntax OK

$keyfile not found in config: default=00-index-key
$buffer_fill_pct not found in config: default=75
$buffer_pause_usec not found in config: default=100
|------------------------------------------------------------
| Checking 'buffer' on this machine... Ok
| Checking /bin/sh on this machine... bash1
|------------------------------------------------------------
| Doing level 0 backup of set all using tar
| All sets = full (1 tapes)
| Rewinding & erasing tape...
| Found index key 200703180200, next file is 2
| Deleting record for 200703180200 file 0
| Deleting record for 200703180200 file 1
|------------------------------------------------------------
| Creating index key 200703190200
| Backup set "full" (/)
| Tape #0
|------------------------------------------------------------
SCSI 2 tape drive:
File number=1, block number=0, partition=0.
Tape block size 0 bytes. Density code 0x26 (DDS-4 or QIC-4GB).
Soft error count since last status=0
General status bits on (81010000):
EOF ONLINE IM_REP_EN
|------------------------------------------------------------
| File number 1, tape index 200703190200
| Backup of: /
| Date of this level 0 backup: Mon Mar 19 02:00:18 2007
| Date of last level 0 backup: the epoch
|------------------------------------------------------------
| cd "/" && /tmp/collectexit.8758.sh find . -depth -xdev ! -type s ! -regex \
| "news/articles" ! -regex ".*~"$ -print0 | /tmp/collectexit.8758.sh tar \
| --create --null --files-from=- --ignore-failed-read --same-permissions \
| --no-recursion --totals --label "level 0 / Mon Mar 19 02:00:18 2007 \
| tar+gzip from r011" --sparse --atime-preserve -b 64 --file - | \
| /tmp/collectexit.8758.sh gzip -4 | /tmp/collectexit.8758.sh buffer -m \
| 20m -p 75 -s 32k -t -u 100 -B -o "/dev/nst0"
| [ ! -e /tmp/exitstatus.8758 ]
|------------------------------------------------------------
find: ./tmp/clamav-069ddd6bdab7b6fcaeeda038016b9099: No such file or directory
Total bytes written: 18436128768 (18GiB, 2.6MiB/s)
Kilobytes Out 14078688

ERROR: non-zero exit from:
find . -depth -xdev ! -type s ! -regex news/articles ! -regex .*~$ -print0

ERROR: exiting
|------------------------------------------------------------
| Backup start: Mon Mar 19 02:00:18 2007
| Backup end: Mon Mar 19 03:55:22 2007
|------------------------------------------------------------
SCSI 2 tape drive:
File number=2, block number=0, partition=0.
Tape block size 0 bytes. Density code 0x26 (DDS-4 or QIC-4GB).
Soft error count since last status=0
General status bits on (81010000):
EOF ONLINE IM_REP_EN
|------------------------------------------------------------
| Rewinding...
| Compressing log (all.0.200703190200.gz)
| Linking all.latest.gz -> all.0.200703190200.gz
|------------------------------------------------------------
Backup terminated: backup failed - status: 256

To me it appears that the error is:

Quote

ERROR: non-zero exit from: |------------------------------------------------------------
find . -depth -xdev ! -type s ! -regex news/articles ! -regex .*~$ -print0

What does this mean?

Is the backup usable but just un-verified?

Should I report this to the bugtracker?

What is "status: 256"?

Thanks!

Backup to tape fails (backup failed - status: 256)

wires

Backup to tape fails (backup failed - status: 256)

bpivk

Backup to tape fails (backup failed - status: 256)