I've just installed smeserver-sysmon-5.0-3.noarch.rpm
after reboor the PC speaker beep constantly
running sensors I've got:
[root@gw ~]# sensors
it87-isa-0290
Adapter: ISA adapter
VCore 1: +1.70 V (min = +1.42 V, max = +1.57 V) ALARM
VCore 2: +1.78 V (min = +2.40 V, max = +2.61 V) ALARM
+3.3V: +6.59 V (min = +3.14 V, max = +3.46 V) ALARM
+5V: +4.97 V (min = +4.76 V, max = +5.24 V)
+12V: +11.71 V (min = +11.39 V, max = +12.61 V)
-12V: -18.89 V (min = -12.63 V, max = -11.41 V) ALARM
-5V: -8.24 V (min = -5.26 V, max = -4.77 V) ALARM
Stdby: +4.95 V (min = +4.76 V, max = +5.24 V)
VBat: +3.20 V
fan1: 4821 RPM (min = 0 RPM, div = 8)
fan2: 0 RPM (min = 3013 RPM, div = 8) ALARM
fan3: 0 RPM (min = 3013 RPM, div = 8) ALARM
M/B Temp: +25°C (low = +15°C, high = +40°C) sensor = thermistor
CPU Temp: +25°C (low = +15°C, high = +45°C) sensor = thermistor
Temp3: +35°C (low = +15°C, high = +45°C) sensor = diode
eeprom-i2c-0-51
Adapter: SMBus I801 adapter at 5000
Memory type: DDR SDRAM DIMM
Memory size (MB): 256
eeprom-i2c-0-50
Adapter: SMBus I801 adapter at 5000
Memory type: DDR SDRAM DIMM
Memory size (MB): 256
I've tried to disable beep option in /etc/sensors.conf with:
set beep_enable 0
..then rebooting, but not working, spreaker beep my like a hell;
Any suggestion?
Thx
1 Replies
2267 Views