Koozali.org: home of the SME Server

driver

Tjoepken

driver
« on: June 03, 2007, 01:52:59 PM »
is it possibel to put e newer driver in to the install cd by my own or isnt possibel. becous i found a driver for my network card on linux. and i want wen i install sme it also instal direct the driver,  without putting first another network card in for finisching installation en install later the driver en put in de other nic. the card i mean is a d-link gigabit card DGE-528T ps sorry for my bad english normaly is speak dutch

Offline bpivk

  • *
  • 908
  • +0/-0
    • http://www.bezigrad.com
driver
« Reply #1 on: June 03, 2007, 04:16:19 PM »
I had that card and i suggest that you get another one because this just doesn't work well with SME. I got it to work but had constant crashes because of it.
"It should just work" if it doesn't report it. Thanks!

Tjoepken

driver
« Reply #2 on: June 03, 2007, 05:31:53 PM »
thx for the comment. da i get it out of the server. witch is the best card to put in the server as gigabit nic. becaus i want it use also as fileserver

Offline bpivk

  • *
  • 908
  • +0/-0
    • http://www.bezigrad.com
driver
« Reply #3 on: June 03, 2007, 07:53:39 PM »
Well most of the users here recomend intel i couldn't find any so i can't recomend it but i would try one of them.

Someone posted wich intel gigabit cards work well so i suggest that you use the forum search function and try to find that post.

Found it for you:
http://forums.contribs.org/index.php?topic=31090.0
"It should just work" if it doesn't report it. Thanks!

Tjoepken

driver
« Reply #4 on: June 06, 2007, 08:21:21 PM »
thx man for all the info. but il wil run it now on 100mbit work also fine en i wil juse another pc as fileserver. many thx to you