Hi all
The mISDN support in SARK/SAIL 2.1.15-473 has now done over 1,000,000 call terminations in testing so we are fairly confident that it can be used in the field (as a beta for now – see below). As a result, we are discontinuing development of the Bristuff branch of the software. There will be no further functionality added to the "anabri" asterisk releases or to SAIL-2.1.14. SAIL-2.1.14-478 will be the final functional release of 2.1.14. This release contains provisioning support for the new Aastra 5Xi range of SIP terminals and automated PRI support for non-Bristuff users (Bristuff breaks the Digium PRI support so you cannot run PRI and Junghanns BRI on the same box).
With the mISDN support in 2.1.15 however, you can freely mix BRI cards and PRI cards (and TDM cards) in the -473 (and later) releases.
For production systems we would recommend that you continue to use 2.1.14/1.2.10 until Digium formally announce their move to Asterisk 1.4 for production (expected sometime in August). We (Selintra) have 2.1.15/1.4.1 runnning in production on our pbx here at the office and we are so far happy with its performance and functionality.
Now, to the releases...
SAIL-2.1.14....
http://mirror.contribs.org/smeserver/contribs/selintra/RPMS/AsteriskForSail-2.1.14/None-ISDN/smeserver-asterisk-1.2.10-10.i686.rpm http://mirror.contribs.org/smeserver/contribs/selintra/RPMS/AsteriskForSail-2.1.14/None-ISDN/smeserver-asterisk-zappri-MPP-1.2.6-6.i686.rpm ftp://81.149.154.14/Pre-Releases/selintra-sail-2.1.14-478.noarch.rpm SAIL-2.1.15...
http://mirror.contribs.org/smeserver/contribs/selintra/RPMS/Asterisk-1.4.1/smeserver-asterisk-1.4.1-8.i686.rpm http://mirror.contribs.org/smeserver/contribs/selintra/RPMS/Asterisk-1.4.1/smeserver-asterisk-zappri-MPP-1.4.0-5.i686.rpm ftp://81.149.154.14/Pre-Releases/selintra-sail-2.1.15-477.noarch.rpm ============================================
New Functionality 2.1.14
Automatic recognition and configuration of Digium PRI cards (1,2 & 4 span, T1 & E1)
Automatic T1/E1 jumper setting detection
A central directory system for Snom and Aastra SIP terminals
Patch roll-ups and bug-fixes
Provisioning support for Aastra 5Xi SIP terminals
New Functionality 2.1.15
Full support for Asterisk 1.4
Automatic recognition and configuration of Digium PRI cards (1,2 & 4 span, T1 & E1)
Automatic T1/E1 jumper setting detection
Full mISDN support with automatic recognition of all HFC (Junghanns, Beronet et al) and AVM Fritz BRI cards (Asterisk 1.4 does not yet support the Digium BRI card).
Switchable NT/TE support for HFC BRI Cards allowing SAIL to run in Gateway mode for legacy PBX.
A central directory system for Snom and Aastra SIP terminals
Patch roll-ups and bug-fixes
Provisioning support for Aastra 5Xi SIP terminals
KNOWN ISSUES
There is a bug in zappri-1.4 which stops it from running zaptel cards with the SMP kernel. We are working on this and hope to have a fix shortly. For, the moment, if you have SMP equipment we would recommend that you stay with 1.2 until we have a fix for you.
There is a small bug in the provisioning support which we will fix shortly. However here is a temporary fix for now...
In the fragment
/etc/e-smith/templates/tftpboot/seldir/10confFind the following line which begins...
system "/bin/cp -f /tftpboot.....
Replace it with...
system "/bin/cp -f /tftpboot/seldir /home/e-smith/files/primary/html";
save the fragment.
Kind Regards
Selintra
_________________
2 Replies
1518 Views