Topic: install sme 7.1 erro 2 raid 0

[mgb]

l install sme 7.1
install ok
start boot no erro 3
not boot
 
disk 250g*2
config card raid 0  or  1
controller  tx2300   fasttrak  (promise)
help for install

http://www.promise.com/product/product_detail_eng.asp?segment=RAID%200/1%20HBAs&product_id=136

[Stefano]

l install sme 7.1
install ok
start boot no erro 3
not boot
 
disk 250g*2
config card radi 0  or  1
controller  tx2300   fasttrak  (promise)
help for install

http://www.promise.com/product/product_detail_eng.asp?segment=RAID%200/1%20HBAs&product_id=136

are you using hw raid?

Stefano

[mgb]

you raid?

using raid 0
bios Cost-effective RAID 0/1 controller with SATA 3Gb/s drive support for motherboards with a PCI interface

install sme 7.1 normal

[Stefano]

you raid?

using raid 0
bios Cost-effective RAID 0/1 controller with SATA 3Gb/s drive support for motherboards with a PCI interface

install sme 7.1 normal

ok.. disable raid on mb and try again

Ciao

Stefano

[mgb]

raid 0
i get 500 gb disk form 250 *2

Fast server ?
in smeserver 7.1 is  get raid 1
How to Install sme 7.1 ?
help
readme from Promise FastTrak TX2200/TX2300/TX4200/TX4300 Series For Linux RedHat AS/ES 3.0 Driver v1.0.0 build 15
How to Install sme 7.1 ?
2.1 RedHat Installation. ?

2.1.1 New OS Installation: ?

    1.) Start the RedHat Linux Installation with CD ROM booting.
    2.) At the "Welcome to Red Hat linux ..." installation screen, a prompt
        labeled "boot:" will appear at the bottom of the screen.
    3.) Please type "expert" (without quotations) at the "boot:" prompt, then
        press the enter key. (See Note 3.1)
    4.) At the "Devices" dialog box, insert the FastTrak Driver Disk in the
        floppy drive and then select "OK" or "Yes".
    5.) Continue with the installation as normal.