Hi,
I've a Fujitsu-Primergy Econel 200 with 1GB RAM and two SATA Disks.
During install, the server freeze in the "udev-039-10.15.EL4-i386" packet.
I've also tried to install:
CentOS 4.5
RHEL 4 Update 5
but is the same.
The server doesn't switch on console F2, F3, F4, F5, F6.
I've installed some time the server to see the output of various console:
http://www.i80.it/Temp/SME/Console.jpghttp://www.i80.it/Temp/SME/ALT+F2.jpghttp://www.i80.it/Temp/SME/ALT+F3.jpghttp://www.i80.it/Temp/SME/ALT+F4.jpghttp://www.i80.it/Temp/SME/ALT+F5.jpghttp://www.i80.it/Temp/SME/ALT+F6.jpgEvery console output, is before the install process ( during the partition layout creation and format ) and there isn't any error one moment before the freeze.
I've tried to install on a IDE and USB disk but is the same, with and without RAID.
I've tried to disable USB, Hypertrading, ACPI on bios option.
With Ubuntu 6.06 LTS, Ubuntu 7.04 the install is OK.
This is the output of "lspci -v":
00:00.0 Host bridge: Intel Corporation E7320 Memory Controller Hub (rev 0c)
Subsystem: Fujitsu Siemens Computer GmbH Unknown device 1073
Flags: bus master, fast devsel, latency 0
Capabilities: [40] Vendor Specific Information
00:00.1 Class ff00: Intel Corporation E7320 Error Reporting Registers (rev 0c)
Subsystem: Fujitsu Siemens Computer GmbH Unknown device 1073
Flags: fast devsel
00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev 0c) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Capabilities: [50] Power Management version 2
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable-
Capabilities: [64] Express Root Port (Slot-) IRQ 0
00:03.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A1 (rev 0c) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Capabilities: [50] Power Management version 2
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable-
Capabilities: [64] Express Root Port (Slot-) IRQ 0
00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Capabilities: [50] PCI-X bridge device
00:1d.0 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Siemens Computer GmbH Unknown device 1073
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 9880 [size=32]
00:1d.1 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Siemens Computer GmbH Unknown device 1073
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 9c00 [size=32]
00:1d.4 System peripheral: Intel Corporation 6300ESB Watchdog Timer (rev 02)
Subsystem: Fujitsu Siemens Computer GmbH Unknown device 1073
Flags: medium devsel
Memory at f9fff800 (32-bit, non-prefetchable) [size=16]
00:1d.5 PIC: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02) (prog-if 20 [IO(X)-APIC])
Subsystem: Fujitsu Siemens Computer GmbH Unknown device 1073
Flags: bus master, fast devsel, latency 0
Capabilities: [50] PCI-X non-bridge device
00:1d.7 USB Controller: Intel Corporation 6300ESB USB2 Enhanced Host Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Fujitsu Siemens Computer GmbH Unknown device 1073
Flags: bus master, medium devsel, latency 0, IRQ 21
Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000d000-0000efff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 50000000-500fffff
00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.2 IDE interface: Intel Corporation 6300ESB SATA Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Fujitsu Siemens Computer GmbH Unknown device 1073
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at fc00 [size=16]
00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02)
Subsystem: Fujitsu Siemens Computer GmbH Unknown device 1073
Flags: medium devsel, IRQ 11
I/O ports at 0400 [size=32]
04:01.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
Subsystem: Adaptec AHA-2940UW SCSI Host Adapter
Flags: bus master, medium devsel, latency 64, IRQ 17
I/O ports at e800 [disabled] [size=256]
Memory at fbfff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 50020000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
04:02.0 RAID bus controller: Promise Technology, Inc. PDC20319 (FastTrak S150 TX4) (rev 02)
Subsystem: Promise Technology, Inc. PDC20319 (FastTrak S150 TX4)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 20
I/O ports at ec00 [size=64]
I/O ports at e480 [size=16]
I/O ports at e400 [size=128]
Memory at fbffe000 (32-bit, non-prefetchable) [size=4K]
Memory at fbfc0000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at 50030000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
04:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
Subsystem: Fujitsu Siemens Computer GmbH Unknown device 1073
Flags: bus master, stepping, medium devsel, latency 64, IRQ 11
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at d000 [size=256]
Memory at fbffd000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 50000000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
04:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705 Gigabit Ethernet (rev 03)
Subsystem: Fujitsu Siemens Computer GmbH Unknown device 1073
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
Memory at fbfa0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
I think is a "udev" packet problem. Is possible to bypass the problem?
Could you help me ?!?
filloweb
1 Replies
3074 Views