Koozali.org: home of the SME Server

Remote network share

Offline Karsa

  • *
  • 12
  • +0/-0
Remote network share
« on: March 03, 2008, 07:42:10 PM »
I'm having some problems setting up a remote share.

Situation:
I have a laptop that I use at work (WinXP) with several network drives needed to run some application on the server ibay (SME 7.2).

Goal:
Use the laptop from home and access the same applications on the server.

I can connect to server via Putty with private key but after that I don't have clue :-?

Can I use this connection to make network shares or do I have to use some other connection.
Any help is appreciated.


Offline Jáder

  • *
  • 1,099
  • +0/-0
    • LinuxFacil
Re: Remote network share
« Reply #1 on: March 03, 2008, 08:12:48 PM »
You should open a VPN connection from home.

Just don´t know how fast will run you apps... it will depends of your internet links.

Good luck

Jáder
...

Offline Karsa

  • *
  • 12
  • +0/-0
Re: Remote network share
« Reply #2 on: March 05, 2008, 10:59:09 AM »
I tried to follow your advice and this how-to, but although I managed to make the connection (at least windows claims so) I can't access anything... what I'm I missing?  :? :?

Offline raem

  • *
  • 3,972
  • +4/-0
Re: Remote network share
« Reply #3 on: March 05, 2008, 11:08:15 AM »
Karsa

After establishing the VPN connection, you need to map the drives eg
net use N: \\serverIP\ibayname

or you can do

\\servername
to see all shares
...

Offline Karsa

  • *
  • 12
  • +0/-0
Re: Remote network share
« Reply #4 on: March 06, 2008, 05:17:53 PM »
I wrote that but I can't establish any network path.

I got and error 53 message.


My SME server is used only as a file server and I'm using the following network configuration:

    Laptop    -->   Home Router    -->   Internet   -->   Work Router   -->   SME Server
192.168.0.10        192.168.0.1  //   ISP Dynamic IP  //  192.168.0.6          192.168.0.1

Offline Stefano

  • *
  • 10,894
  • +3/-0
Re: Remote network share
« Reply #5 on: March 06, 2008, 05:20:18 PM »
I wrote that but I can't establish any network path.

I got and error 53 message.


My SME server is used only as a file server and I'm using the following network configuration:

    Laptop    -->   Home Router    -->   Internet   -->   Work Router   -->   SME Server
192.168.0.10        192.168.0.1  //   ISP Dynamic IP  //  192.168.0.6          192.168.0.1


Hi
the two lans ip must be different: 192.168.0.X and 192.168.Y.Z where Y is different from 0

HTH
Ciao
Stefano

Offline raem

  • *
  • 3,972
  • +4/-0
Re: Remote network share
« Reply #6 on: March 06, 2008, 10:47:22 PM »
Dear All

I created this VPN Howto, I'm sure more practical tips can be added to it.
http://wiki.contribs.org/VPN_practical_tips
« Last Edit: March 07, 2008, 01:52:52 AM by RayMitchell »
...

Offline Karsa

  • *
  • 12
  • +0/-0
Re: Remote network share
« Reply #7 on: March 07, 2008, 10:32:01 AM »
Thank you all, it's working now.

It was the IPs - I was just hoping for another answer, I have fixed IPs on my home network and didn't felt like changing them all  :D

Offline cactus

  • *
  • 4,880
  • +3/-0
    • http://www.snetram.nl
Re: Remote network share
« Reply #8 on: March 07, 2008, 07:12:44 PM »
Thank you all, it's working now.

It was the IPs - I was just hoping for another answer, I have fixed IPs on my home network and didn't felt like changing them all  :D
You should never use fixed IP's, unless there is a compulsive reason for this, as this will make management a lot harder as you have just discovered.
Be careful whose advice you buy, but be patient with those who supply it. Advice is a form of nostalgia, dispensing it is a way of fishing the past from the disposal, wiping it off, painting over the ugly parts and recycling it for more than its worth ~ Baz Luhrmann - Everybody's Free (To Wear Sunscreen)