This is what I got when running the command but like I said I am new to this I don't have a clue, The Drive is an IDE 750 gb Seagate Barracuda.
fdisk -l
Disk /dev/hdb: 750.1 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 * 1 13 104391 fd Linux raid autodetect
/dev/hdb2 14 91201 732467610 fd Linux raid autodetect
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 fd Linux raid autodetect
/dev/sda2 14 19457 156183930 fd Linux raid autodetect
Disk /dev/md1: 106 MB, 106823680 bytes
2 heads, 4 sectors/track, 26080 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk /dev/md1 doesn't contain a valid partition table
Disk /dev/md2: 159.9 GB, 159932219392 bytes
2 heads, 4 sectors/track, 39045952 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk /dev/md2 doesn't contain a valid partition table
Disk /dev/dm-0: 157.8 GB, 157873602560 bytes
2 heads, 4 sectors/track, 38543360 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk /dev/dm-0 doesn't contain a valid partition table
Disk /dev/dm-1: 2013 MB, 2013265920 bytes
2 heads, 4 sectors/track, 491520 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk /dev/dm-1 doesn't contain a valid partition table
It looks like to me it is already addded so now my question is how do I point an ibay to it?
Thanks,
Michael