Topic: How to connect a ISDN-PBX with TDM410P ?

[fpausp]

Hi All,

I have problems to get a TDM410P working behind a ISDN-PBX. I have an EURO-ISDN-Line (Austria) in point-to-point mode. Behind this ISDN-Line is a PBX (Agfeo AS-40).What i also have is a SME 7.3-Server with SAIL-651 and a TDM410P (1xFXO and 1xFXS).

After a quick test it was only working to call out, the PBX-Admin configured an extension for incomming calls on the port where i connect the TDM410P, but now the line is busy.

How must we interconnect and configure all and should we use the FXO or the FXS-Port ?


Best
fpausp

[bbialy]

definitly fxo port

[PBX]FXS-------FXO[CARD - SME]

[CARD - SME]FXS------FXO[PHONE] (analogue not ip)

short shema how to switch it in.

410P i analogue card so there is not much to configure on sme site
i think more to configure is on PBX
good idea is to create virtual ddi on pbx and switch into it another incomming connection for other ddi's
bbialy

[fpausp]

Hi bbialy,

Thanks for your quick answer, i will speak with the ISDN-PBX-Admin.

regards
fpausp

[fpausp]

Hi All,

OK, it is working but not 100%. The problem is when the caller stops the call befor the callee can accept the call, after that the line hangs and is busy, i have test this about five minutes.

Code: [Select]


2008-09-18 06:42:32,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 07:19:12,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 07:26:39,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 07:35:38,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 07:36:22,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,4,,
2008-09-18 07:39:26,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 07:43:07,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,4,,
2008-09-18 07:47:12,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 07:49:20,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 08:00:09,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 08:01:22,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 08:27:55,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,4,,
2008-09-18 08:30:38,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 08:30:46,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 08:32:46,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 08:33:13,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 08:44:35,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,4,,
2008-09-18 08:44:43,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 08:47:00,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 08:52:55,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 08:55:15,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 09:07:55,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 09:11:09,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 09:11:18,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 09:15:24,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 09:20:36,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 09:25:02,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,4,,
2008-09-18 09:25:10,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 09:30:35,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 09:31:55,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 09:43:05,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,4,,
2008-09-18 09:43:54,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 09:55:06,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 09:57:12,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 10:11:03,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 10:20:04,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,4,,
2008-09-18 10:30:01,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 10:47:10,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 10:51:51,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 11:03:07,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 11:07:54,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 11:08:04,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 11:08:13,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 11:08:22,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 11:08:31,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 11:08:40,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 11:09:57,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 11:11:17,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 11:13:10,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 11:26:51,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 11:29:50,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,4,,
2008-09-18 11:36:34,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 11:50:12,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 11:55:42,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 12:08:58,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 12:09:39,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 12:12:47,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 12:19:42,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 12:23:13,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 13:08:04,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 13:09:29,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 13:10:25,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 13:13:44,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 13:14:56,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 13:18:44,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 13:21:42,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 13:22:06,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 13:26:10,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 13:35:03,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,4,,
2008-09-18 13:35:10,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 13:51:28,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,4,,
2008-09-18 14:18:08,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 14:24:14,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 14:24:22,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 14:49:37,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 14:49:46,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 14:53:35,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,4,,
2008-09-18 14:53:44,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,4,,
2008-09-18 14:53:53,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 15:05:35,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,5,,
2008-09-18 15:05:43,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,4,,
2008-09-18 15:05:50,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,4,,
2008-09-18 15:05:57,Zap/3-1,,unknown,Hangup,,i,i,ANSWERED,8,,
2008-09-18 15:07:43,Zap/3-1,,unknown,VoiceMail,4003|u,4003,4003,ANSWERED,184,,
2008-09-18 15:10:59,Zap/3-1,4003,unknown,Dial,SIP/4003|30|twW,4003,4003,ANSWERED,20,,
2008-09-18 15:12:12,Zap/3-1,,unknown,VoiceMail,4003|u,s-Zap3-1,s-Zap3-1,ANSWERED,56,,
2008-09-18 15:15:42,SIP/4001-xxxxxxxx,4001,"""office"" <4001>",Dial,SIP/4000|30|tTwW,4000,4000,NO ANSWER,10,,
2008-09-18 15:14:37,Zap/3-1,4001,unknown,Dial,SIP/4001|30|twW,4001,4001,ANSWERED,79,,
2008-09-18 15:15:59,SIP/4001-xxxxxxxx,4001,"""office"" <4001>",Dial,SIP/4000|30|tTwW,4000,4000,NO ANSWER,3,,
2008-09-18 15:16:49,SIP/4001-xxxxxxxx<ZOMBIE>,4001,"""office"" <4001>",Dial,SIP/4000|30|tTwW,4001,4001,NO ANSWER,2,,
2008-09-18 15:16:32,SIP/4001-xxxxxxxx,4001,"""office"" <4001>",,,4001,4001,ANSWERED,19,,
2008-09-18 15:16:28,Zap/3-1,4001,"""office"" <4001>",Dial,SIP/4001|30|twW,4001,4001,ANSWERED,23,,
2008-09-18 15:16:49,SIP/4000-xxxxxxxx,4001,4001,,,s,s,ANSWERED,16,,
2008-09-18 15:17:33,SIP/4001-xxxxxxxx<ZOMBIE>,4001,"""office"" <4001>",Dial,SIP/4000|30|tTwW,4001,4001,NO ANSWER,1,,
2008-09-18 15:17:26,SIP/4001-xxxxxxxx,4001,"""office"" <4001>",,,4001,4001,ANSWERED,8,,
2008-09-18 15:17:21,Zap/3-1,4001,"""office"" <4001>",Dial,SIP/4001|30|twW,4001,4001,ANSWERED,13,,
2008-09-18 15:17:33,SIP/4000-xxxxxxxx,4001,4001,,,s,s,ANSWERED,17,,
2008-09-18 15:18:38,Zap/3-1,4001,unknown,Dial,SIP/4001|30|twW,4001,4001,ANSWERED,16,,
2008-09-18 15:19:13,SIP/4001-xxxxxxxx<ZOMBIE>,4001,"""office"" <4001>",Dial,SIP/4000|30|tTwW,4001,4001,ANSWERED,12,,
2008-09-18 15:19:02,SIP/4001-xxxxxxxx,4001,"""office"" <4001>",,,4001,4001,ANSWERED,23,,
2008-09-18 15:18:57,Zap/3-1,4001,"""office"" <4001>",Dial,SIP/4001|30|twW,4001,4001,ANSWERED,28,,
2008-09-18 15:19:13,SIP/4000-xxxxxxxx,4001,4001,,,s,s,ANSWERED,20,,
2008-09-18 15:19:36,Zap/3-1,4001,unknown,Dial,SIP/4001|30|twW,4001,4001,ANSWERED,100,,
2008-09-18 15:23:47,SIP/4001-xxxxxxxx,4001,4001,Dial,SIP/0043664xxxxxxx@fairytel,0664xxxxxxx,0664xxxxxxx,NO ANSWER,19,,
2008-09-18 15:29:22,SIP/4001-xxxxxxxx,4001,4001,Dial,SIP/0043676xxxxxxx@fairytel,0676xxxxxxx,0676xxxxxxx,ANSWERED,39,,
2008-09-18 15:24:47,Zap/3-1,,unknown,VoiceMail,4001|u,4001,4001,ANSWERED,325,,
2008-09-18 15:40:42,SIP/4003-xxxxxxxx,4003,"""doris"" <4003>",Dial,SIP/4003|30|tTwW,4003,4003,NO ANSWER,6,,
2008-09-18 15:40:55,SIP/4003-xxxxxxxx,4003,"""doris"" <4003>",Dial,SIP/4003|30|tTwW,4003,4003,NO ANSWER,1,,
2008-09-18 15:44:08,Zap/3-1,,unknown,VoiceMail,4001|u,s-Zap3-1,s-Zap3-1,ANSWERED,52,,



How can i detect the hangup ?


Regards

fpausp

[SARK devs]

Do you have an h extension in the zap context?

[fpausp]

Sorry, i dont know what you mean  ?

Best

[SARK devs]

Is this a SAIL box or are you just running asterisk?

[fpausp]

A Sail-Box, sme 7.3 with all updates, sail-2.2.1-651 on a TX150 S4.

[bbialy]

i 've go similar problem
how to detect Hangup on tdm410p

here some log

the channel is free after
asterisk CLI

"meetme kick 300 all"

I have changed local settings

Code: [Select]

[root@voip init.d]# db selintra getprop global COUNTRY
cz
[root@voip init.d]# db selintra getprop global IMPEDANCE
CZECH
one more think  I modified  /etc/e-smith/web/functions/sarkglobals to be able to choose 'cz' from dropdown in globals section
 
{server is in czech republic}

Code: [Select]

[Sep 22 18:48:11] NOTICE[6579]: chan_zap.c:6387 ss_thread: Got event 18 (Ring Begin)...
[Sep 22 18:48:11] NOTICE[6579]: chan_zap.c:6387 ss_thread: Got event 2 (Ring/Answered)...
[Sep 22 18:48:15] NOTICE[6579]: chan_zap.c:6387 ss_thread: Got event 18 (Ring Begin)...
    -- Executing [s@mainmenu:1] GotoIf("Zap/2-1", "0?s-Zap1-1|1") in new stack
    -- Executing [s@mainmenu:2] GotoIf("Zap/2-1", "1?s-Zap2-1|1") in new stack
    -- Goto (mainmenu,s-Zap2-1,1)
    -- Executing [s-Zap2-1@mainmenu:1] AGI("Zap/2-1", "selintra|Inbound|Zap2-1") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/selintra
    -- AGI Script selintra completed, returning 0
    -- Executing [s@conf_pass:1] Answer("Zap/2-1", "") in new stack
    -- Executing [s@conf_pass:2] Wait("Zap/2-1", "1") in new stack
    -- Executing [s@conf_pass:3] Authenticate("Zap/2-1", "5678") in new stack
    -- <Zap/2-1> Playing 'agent-pass' (language 'en')
    -- <Zap/2-1> Playing 'auth-thankyou' (language 'en')
    -- Executing [s@conf_pass:4] MeetMe("Zap/2-1", "300|Mpi") in new stack
  == Parsing '/etc/asterisk/meetme.conf': Found
    -- Created MeetMe conference 1023 for conference '300'
    -- Recording
    -- <Zap/2-1> Playing 'vm-rec-name' (language 'en')
    -- <Zap/2-1> Playing 'beep' (language 'en')
    -- x=0, open writing:  /var/spool/asterisk/meetme/meetme-username-300-1 format: sln, 0x8caa288
    -- User ended message by pressing #
    -- <Zap/2-1> Playing 'auth-thankyou' (language 'en')
    -- <Zap/2-1> Playing 'vm-review' (language 'en')
    -- <Zap/2-1> Playing 'vm-msgsaved' (language 'en')
    -- <Zap/2-1> Playing 'conf-onlyperson' (language 'en')
    -- Started music on hold, class 'default', on Zap/2-1

no hangup WHY ???
i ve got h section in this custom app

Code: [Select]


exten => s,1,Answer
exten => s,2,Wait(1)
exten => s,3,Authenticate(5678)
exten => s,4,MeetMe(300|Mpi)
exten => s,5,Playback(vm-goodbye)
exten => s,6,Hangup
exten => h,1,Hangup

card parameters

Code: [Select]

lspci -vv
11:00.0 Ethernet controller: Digium, Inc.: Unknown device 8005 (rev 11)
        Subsystem: Digium, Inc.: Unknown device 8005
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B+
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (16000ns min, 32000ns max), Cache Line Size 08
        Interrupt: pin A routed to IRQ 193
        Region 0: I/O ports at 3000 [size=256]
        Region 1: Memory at ed100000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-


Code: [Select]

lspci -vn
11:00.0 Class 0200: d161:8005 (rev 11)
        Subsystem: d161:8005
        Flags: bus master, fast Back2Back, medium devsel, latency 32, IRQ 193
        I/O ports at 3000 [size=256]
        Memory at ed100000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [c0] Power Management version 2


Code: [Select]

cat /proc/zaptel/1

Span 1: WCTDM/0 "Wildcard TDM410P Board 1" (MASTER)
        IRQ misses: 6

           1 WCTDM/0/0 FXSKS (In use)
           2 WCTDM/0/1 FXSKS (In use)
           3 WCTDM/0/2 FXSKS (In use)
           4 WCTDM/0/3 FXSKS (In use)



[SARK devs]

Hi bb

Code: [Select]

[root@voip init.d]# db selintra getprop global COUNTRY
cz
[root@voip init.d]# db selintra getprop global IMPEDANCE
CZECH

I'm afraid that setting IMPEDANCE in globals won't do it for you.  You need to patch /etc/init.d/sark... At or around line 149 you will find....

Code: [Select]

        if [ $WCTDM = 'YES' ]; then
#a          COUNTRY=`/sbin/e-smith/db selintra  getprop global IMPEDANCE`
            /sbin/modprobe wctdm #opermode=$COUNTRY
        fi

You'll need to modify it for it to work...

Code: [Select]

        if [ $WCTDM = 'YES' ]; then
           /sbin/modprobe wctdm opermode=CZECH
        fi


Hi FP

You are going to have to figure out what the PBX is sending on a hangup. Otherwise it's going to be difficult to set asterisk up to recognise the on-hook.

Kind Regards

S


Best

S

[bbialy]

sorry doesn.t work 
 after restart i had
but it sill doesn't recognize hangup from remote line
on conferences and in normal incomming and outgoing call

Code: [Select]

[root@voip init.d]# /etc/init.d/sark start
warning: only V3 signatures can be verified, skipping V4 signature
warning: only V3 signatures can be verified, skipping V4 signature
warning: only V3 signatures can be verified, skipping V4 signature
warning: only V3 signatures can be verified, skipping V4 signature
warning: only V3 signatures can be verified, skipping V4 signature
warning: only V3 signatures can be verified, skipping V4 signature
warning: only V3 signatures can be verified, skipping V4 signature
Waiting for udev.
loading tuning coefficients
fxotune: successfully set echo coeffecients on FXO modules
Starting asterisk:                                         [  OK  ]


[SARK devs]

HI BB - what does dmesg show when loading the card?

[bbialy]

is that what you asking??

Code: [Select]

Freed a Wildcard
Zapata Telephony Interface Unloaded
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.4.11
Zaptel Echo Canceller: MG2
ACPI: PCI Interrupt 0000:11:00.0[A] -> GSI 21 (level, low) -> IRQ 193
Port 1: Installed -- AUTO FXO (FCC mode)
Port 2: Installed -- AUTO FXO (FCC mode)
Port 3: Installed -- AUTO FXO (FCC mode)
Port 4: Installed -- AUTO FXO (FCC mode)
VPM100: Not Present
Found a Wildcard TDM: Wildcard TDM410P (4 modules)
Registered tone zone 32 (Czech Republic)


[SARK devs]

Yup,

This shows that your card is still in FCC impedance mode (NOT CZECH).

Here is a step-by-step

first - make sure that you have run PCI Cards and your card is defined to SARK.
Now... shut down sark

Code: [Select]

/etc/init.d/sark stop
Now do your fix to /etc/init.d/sark... 

1 - for a TDM400P...

Code: [Select]

        if [ $WCTDM = 'YES' ]; then
#a          COUNTRY=`/sbin/e-smith/db selintra  getprop global IMPEDANCE`
            /sbin/modprobe wctdm opermode=CZECH
        fi

2- for a TDM410P...

Code: [Select]

        if         if [ $WCTDM24XXP = 'YES' ]; then
#a          COUNTRY=`/sbin/e-smith/db selintra  getprop global IMPEDANCE`
            /sbin/modprobe wctdm24xxp opermode=CZECH
        fi


save it and start sark

Code: [Select]

/etc/init.d/sark start
now run dmesg and you will see...

Code: [Select]

Zaptel Version: 1.4.11
Zaptel Echo Canceller: MG2
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 177
Freshmaker version: 73
Freshmaker passed register test
Module 0: Installed -- AUTO FXO (CZECH mode)
Module 1: Installed -- AUTO FXO (CZECH mode)
Module 2: Installed -- AUTO FXS/DPO
Module 3: Installed -- AUTO FXS/DPO
Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules)

And now your card impedance is correct.  If it still won't detect hang-ups then you will need to contact Digium.  They give free installation support on new cards.

Best

S

[bbialy]

yes that helps
but I've made three more changes in zapata.conf header

Code: [Select]

hanguponpolarityswitch=yes
callprogress=yes
busydetect=yes
bbialy