Topic: sail-2.3.1-13 and SME Server 8.0 Beta 4

[saleh]

When i run the selintra command this error occurs

[root@sme ~]# /var/lib/asterisk/agi-bin/selintra
/var/lib/asterisk/agi-bin/selintra: error while loading shared libraries: libmysqlclient_r.so.14: cannot open shared object file: No such file or directory

[root@sme ~]# locate libmysqlclient_r
/usr/lib/mysql/libmysqlclient_r.a
/usr/lib/mysql/libmysqlclient_r.so
/usr/lib/mysql/libmysqlclient_r.so.15
/usr/lib/mysql/libmysqlclient_r.so.15.0.0

[SARK devs]

we haven't tested on 8.0 yet.

I'm sure there will be changes we have to make.

For now, you shouldn't run Sail on 8.0

Best

S

[saleh]

I have tested sail-2.3.1-20 on the SME Server 8.0 Beta 4  and now the problem with the libmysqlclient_r.so.14 resolved and work well, but i see that the analogue Extensions not displayed on the Operator Panel, i have TDM400  with 2 FXS and one FXO


5000  default     DAHDI Ext(FXS)1     AnalogFXS  NA   Analogue           
5001    default    DAHDI Ext(FXS)2    AnalogFXS         NA    Analogue         
5002    default    ext5002    Grandstream GXP 2000


Thanks and Best Regards
Saleh

 

[SARK devs]

Hello Saleh,

Do you mean the Flash Operator Panel?...

Best

S

[saleh]

Yes, i mean the Flash Operator Panel.

Best Regards
Saleh

[SARK devs]

Ah OK, you'll need to modify it if you want to see analogue extensions.  It is specifically set-up to show SIP extensions and SIP/IAX/TDM trunks. It doesn't look for analogue extensions.  In fact, I'm not even sure if we've done the work to convert it for DAHDI trunks yet - I think it may still be looking for Zap Trunks.

It's easy enough to change.  The code fragments are in

/etc/e-smith/templates/usr/local/operator/op_buttons.cfg/

Thanks for your input and let us know if you find any glitches in 8.0.  You don't say which version of Asterisk you have installed, but we'd be pleased if you would test with 1.6.1.

Kind Regards

S




 

[saleh]

Version of Asterisk: 1.4.25.1
Version of DAHDI: 2.1.0.4

Best Regards

Saleh

[saleh]

Syntax error on the /etc/dahdi/system.conf

Current Contents of /etc/dahdi/system.conf

# Autogenerated by /usr/sbin/dahdi_genconf on Wed Jul  1 09:06:00 2009 -- do not hand edit
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER)
fxoks=1
echocanceller=oslec,1
fxoks=2
echocanceller=oslec,2
# channel 3, WCTDM/4/2, no module.
fxsks=4
echocanceller=oslec,4

# Global data

loadzone   = uk
defaultzone   = uk


Loading DAHDI hardware modules:
  wct4xxp:                                                 [  OK  ]
  wcte12xp:                                                [  OK  ]
  wct1xxp:                                                 [  OK  ]
  wcte11xp:                                                [  OK  ]
  wctdm24xxp:                                              [  OK  ]
  wcfxo:                                                   [  OK  ]
  wctdm:                                                   [  OK  ]
  wcb4xxp:                                                 [  OK  ]
  wctc4xxp:                                                [  OK  ]
  xpp_usb:                                                 [  OK  ]
  opvxa1200:                                               [  OK  ]
  ystdm8xx:                                                [  OK  ]
  ystdm16xx:                                               [  OK  ]
  ap400:                                                   [  OK  ]
  dahdi_dynamic_eth:                                       [  OK  ]
  dahdi_dynamic_ethmf:                                     [  OK  ]

Running dahdi_cfg:  Notice: Configuration file is /etc/dahdi/system.conf
line 14: Syntax error. Should be <keyword>=<value>
line 16: Syntax error. Should be <keyword>=<value>

2 error(s) detected   [FAILED]

I think that the "SARKPCI - Discover Hardware" add wrong  lines on the /etc/dahdi/system.conf file.

But when i run /usr/sbin/dahdi_genconf manually the problem does not appear and the problem occur only in blank lines   

Loading DAHDI hardware modules:
  wct4xxp:                                                 [  OK  ]
  wcte12xp:                                                [  OK  ]
  wct1xxp:                                                 [  OK  ]
  wcte11xp:                                                [  OK  ]
  wctdm24xxp:                                              [  OK  ]
  wcfxo:                                                   [  OK  ]
  wctdm:                                                   [  OK  ]
  wcb4xxp:                                                 [  OK  ]
  wctc4xxp:                                                [  OK  ]
  xpp_usb:                                                 [  OK  ]
  opvxa1200:                                               [  OK  ]
  ystdm8xx:                                                [  OK  ]
  ystdm16xx:                                               [  OK  ]
  ap400:                                                   [  OK  ]
  dahdi_dynamic_eth:                                       [  OK  ]
  dahdi_dynamic_ethmf:                                     [  OK  ]

Running dahdi_cfg:                                         [  OK  ]


Best Regards

Saleh

[SARK devs]

Interesting....

We know about the two space lines causing a problem.  WE weren't aware that it doesn't happen if you run dahdi_genconf on its own.

All sark does is execute dahdi_genconf so I'm not sure why there should be a difference in outcome.

Thanks for this Saleh.

Best

S

[saleh]

The Problem is on your

sub commitLines ($)

{
        my ($q) = @_;
        my $gonogo = ();
        my $dahdi_system = $q->param ('dahdi_system');
        my $dahdi_channels = $q->param ('dahdi_channels');

        open OUT, ">/etc/dahdi/system.conf";
        print OUT $dahdi_system;
        close OUT;

        ..............

Example:

PCI Cards => Press Initialise => Press ReGen

then start dahdi manually the problem does not appear.

Other Example: PCI Cards => Press Initialise => Press ReGen => Commit

then start dahdi manually the problem appear.

Loading DAHDI hardware modules:
  wct4xxp:                                                 [  OK  ]
  wcte12xp:                                                [  OK  ]
  wct1xxp:                                                 [  OK  ]
  wcte11xp:                                                [  OK  ]
  wctdm24xxp:                                              [  OK  ]
  wcfxo:                                                   [  OK  ]
  wctdm:                                                   [  OK  ]
  wcb4xxp:                                                 [  OK  ]
  wctc4xxp:                                                [  OK  ]
  xpp_usb:                                                 [  OK  ]
  opvxa1200:                                               [  OK  ]
  ystdm8xx:                                                [  OK  ]
  ystdm16xx:                                               [  OK  ]
  ap400:                                                   [  OK  ]
  dahdi_dynamic_eth:                                       [  OK  ]
  dahdi_dynamic_ethmf:                                     [  OK  ]

Running dahdi_cfg:  Notice: Configuration file is /etc/dahdi/system.conf
line 14: Syntax error. Should be <keyword>=<value>
line 16: Syntax error. Should be <keyword>=<value>

2 error(s) detected         [FAILED]


Best Regards

Saleh

[SARK devs]

Nice

We'll follow it up.

Best

S

[SARK devs]

There are some non-*nix characters creeping in from somewhere.

Here is a bandaid


        open OUT, ">/etc/dahdi/system.conf";
        print OUT $dahdi_system;
        close OUT;
#
# bandaid
#   

         system "/usr/bin/dos2unix", "/etc/dahdi/system.conf";

#
#
#



Kind Regards

S 

[saleh]

Thanks, now works well after your changes

Best Regards

Saleh