Topic: Hello I have a question about DHCP

[mgb]

Hello I have a question about DHCP
 I want that server SME8
 Scatter addresses only some computers
 And ignore the rest of the computers
 For example there are about 50 computers on the network
 I would like particularities only 10 computers from the server IP address will
 Another possible mode or
 DHCP server IP address will distribute 10 unique with a unique rate
 And the remaining 40 computers will have addresses with unique gate after

[janet]

mgb

I am unsure of your question, the English grammar is not understandable.

In server manager Hostnames and addresses panel, add the workstation name, desired IP and mac address (of the workstation NIC)
This will force the DHCP server to always issue a workstation with the specified IP

[mgb]

Thanks for the response
 Explain the problem
 I   I have 50 computers Niidiim
  I have two ADSL network
  I would like to direct your computer by a decision
 Computers can not fix or address proxy settings
 Due to a different space use
 I want to register a computer
 Table for DHCP example

 PC1 192.168.183.2 255.255.255.0 DNS 192.168.183.1 GW 192.168.183.254


 PC2 192.168.183.2 255.255.255.0 DNS 192.168.183.1 GW 192.168.183.253
 Thanks

[Stefano]

Table for DHCP example

 PC1 192.168.183.2 255.255.255.0 DNS 192.168.183.1 GW 192.168.183.254


 PC2 192.168.183.2 255.255.255.0 DNS 192.168.183.1 GW 192.168.183.253
 Thanks

you can't

[mgb]

Perhaps with a network card hardware address MAC ADDR
 Or with WINS

[janet]

mgb

Assuming they are Windows workstations, then it is something you would do with system policies

[CharlieBrady]

PC1 192.168.183.2 255.255.255.0 DNS 192.168.183.1 GW 192.168.183.254

 PC2 192.168.183.2 255.255.255.0 DNS 192.168.183.1 GW 192.168.183.253

These two computers cannot co-exist (and both work) on the same physical network.

If you wish to have two distinct (i.e. non-overlapping) address pools, having different default GW, that would be possible, but would require a custom template.

[CharlieBrady]

Assuming they are Windows workstations, then it is something you would do with system policies

No, system policies will not allow two PCs to use the same IP address on the same physical network.

[mgb]

 I was wrong sorry 
correction table
PC1 192.168.183.3 255.255.255.0 DNS 192.168.183.1 GW 192.168.183.254


  PC2 192.168.183.2 255.255.255.0 DNS 192.168.183.1 GW 192.168.183.253
Well I understand the answers given to
 At a
 TXT file
 With list
 Then?

[Stefano]

mgb.. is your server in server only mode?

[jameswilson]

you still cant have 2 pc's with the same address/ ip on the same network, unless you have seperate vlans.

you would need 2 sme's on seperate ips, ie 192.168.183.x and 192.168.184.x

[mgb]

Each computer a different IP

[jameswilson]

but your post shows pc 1 and pc 2 have the same ip?

[johnp]

His updated one shows unique addresses

[mgb]

Well I use the configuration
 server and gateway
 start dhcp
 my addres in network
 192.168.183.1 255.255.255.0 dns sme
 the server sme is the gatway
 The question is from i config the tables
 And ready I set the addresses manually

get 2 gw  1 sme
gw  adsl  192.168.183.254