Koozali.org: home of the SME Server

Upgrade da 7.6.1 a 8 fallito - NIC non riconosciuta

Offline mauro

  • ****
  • 101
  • +0/-0
Re: Upgrade da 7.6.1 a 8 fallito - NIC non riconosciuta
« Reply #15 on: June 22, 2012, 10:03:00 AM »
Il dmesg è della macchina vecchia (quella ok); il dmesg della nuova (che non va) è nel mio primo post.
La scheda è certificata per RH4 ma non per RH5 (NB: non c'è nessuna scheda di rete HP certificata RH5! per questo chiedevo consiglio)
All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer.
-- IBM maintenance manual (1975)

Offline Stefano

  • *
  • 10,894
  • +3/-0
Re: Upgrade da 7.6.1 a 8 fallito - NIC non riconosciuta
« Reply #16 on: June 22, 2012, 11:53:29 AM »
https://www.google.com/search?q=tg3+0000%3A11%3A00.0%3A+Problem+fetching+invariants+of+chip%2C+aborting&ie=utf-8&oe=utf-8&client=ubuntu&channel=fs

pare un problema noto.. dai un'occhiata..

suggerirei di acquistare una scheda compatibile (una intel ad esempio) e vivere felice.. il tempo e la rottura di scatole costano certamente di più

Offline mauro

  • ****
  • 101
  • +0/-0
Re: Upgrade da 7.6.1 a 8 fallito - NIC non riconosciuta
« Reply #17 on: June 22, 2012, 12:09:32 PM »
pare un problema noto.. dai un'occhiata..
hai ragione... il chipset non è lo stesso ma il problema sembra simile.

Quote
suggerirei di acquistare una scheda compatibile (una intel ad esempio) e vivere felice.. il tempo e la rottura di scatole costano certamente di più
Hai assolutamente ragione, ero giunto alla stessa conclusione!
Grazie comunque per l'attenzione
All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer.
-- IBM maintenance manual (1975)

Offline nicolatiana

  • *
  • 724
  • +0/-0
Re: Upgrade da 7.6.1 a 8 fallito - NIC non riconosciuta
« Reply #18 on: June 22, 2012, 12:49:27 PM »
Ciao
Prova della scimmia: cambia slot, se non lo hai già fatto.
 
Nicola
Consulente di Smeserver.it -  Soluzioni e supporto su Sme server in Italia.

Offline mauro

  • ****
  • 101
  • +0/-0
Re: Upgrade da 7.6.1 a 8 fallito - NIC non riconosciuta
« Reply #19 on: June 22, 2012, 01:09:18 PM »
Ciao Nicola,
   ho una sola slot PCI  :(
tutte le altre sono PCI express.
Grazie x il suggerimento!
All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer.
-- IBM maintenance manual (1975)

Offline redteo

  • *
  • 122
  • +0/-0
    • redteo blog
Re: Upgrade da 7.6.1 a 8 fallito - NIC non riconosciuta
« Reply #20 on: July 25, 2012, 12:04:17 AM »
un occhio alle configurazioni bios del risparmio energetico?
ho visto che spesso sta scheda in passto si blocca durante i cambi di stato