I install two sme server in one lan and both use "server and gateway mode".at first they work very nice but yesterday the SME only can recognize one internel nic.therefor i think nic may be have some problem.I change the external nic useing another good nic.and inernel useing the unrecognizable nic.But the result is the good one can't be recognized,and the unrecognizable one be recognized as internal nic.
what's thing happen?
I use dmesg gained some system information.
eth0: 3Com 3c905 Boomerang 100baseTx at 0xf4c0, 00:10:4b:41:78:66, IRQ 14
8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
MII transceiver found at address 24, status 786f.
Enabling bus-master transmits and whole-frame receives.
eth0: Initial media type MII.
eth0: MII #24 status 786f, link partner capability 40a1, setting half-duplex.
via-rhine.c:v1.08b-LK1.0.0 12/14/2000 Written by Donald Becker
http://www.scyld.com/network/via-rhine.htmleth1: VIA VT3043 Rhine at 0xf400, 00:50:ba:a9:59:58, IRQ 9.
eth1: MII PHY found at address 8, status 0x782d advertising 05e1 Link 40a1
In above.the system have two nic.why the system only can use one?
and I use dynamic dns. does it will cause some problem?