HI,
I too have just experienced problems when I upgraded from 5.5 to 5.6.
I cannot login to webmail for any of my user accounts. The error message I get is: "Login failed for some reason. Most likely your username or password was entered incorrectly"
All user accounts work with outlook but not webmail.
Any ideas on a solution
Jim Danvers wrote:
>
> 'k guys....
>
> I built a machine purely for testing playing with as I have
> live data and mail on my 'production/mail server' box and
> didn't want to take any chances buggering anything up.
> So.... I went here:
>
>
ftp://ftp.ibiblio.org/pub/Linux/distributions/e-smith/updates/5.6/Update2>
> .... and did this per the readme:
>
> [root@test update2]# ls -l
> total 2452
> -rw-r----- 1 admin shared 37764 Mar 12 22:19
> e-smith-backup-1.10.1-04
> .noarch.rpm
> -rw-r----- 1 admin shared 364227 Mar 12 22:19
> e-smith-base-4.12.3-01.n
> oarch.rpm
> -rw-r----- 1 admin shared 47985 Mar 12 22:19
> e-smith-hosts-1.10.1-01.
> noarch.rpm
> -rw-r----- 1 admin shared 80295 Mar 12 22:19
> e-smith-locale-fr_CA-1.4
> .1-07.noarch.rpm
> -rw-r----- 1 admin shared 25101 Mar 12 22:19
> e-smith-mailfront-1.0.0-
> 02.noarch.rpm
> -rw-r----- 1 admin shared 17108 Mar 12 22:19
> e-smith-nutUPS-0.0.2-11.
> noarch.rpm
> -rw-r----- 1 admin shared 17077 Mar 12 22:20
> e-smith-wu-imap-1.6.0-02
> .noarch.rpm
> -rw-r----- 1 admin shared 38247 Mar 12 22:20
> flexbackup-0.9.8-07es.no
> arch.rpm
> -rw-r----- 1 admin shared 628743 Mar 12 22:20
> initscripts-6.67-1es12.i
> 386.rpm
> -rw-r----- 1 admin shared 692306 Mar 12 22:20
> nut-1.2.0-1es2.i386.rpm
> -rw-r----- 1 admin shared 81941 Mar 12 22:20
> nut-client-1.2.0-1es2.i3
> 86.rpm
> -rw-r----- 1 admin shared 203655 Mar 12 22:20
> ppp-2.4.2b2-1es2.i386.rp
> m
> -rw-r----- 1 admin shared 2933 Mar 12 22:18
> SMEServer-5.6_Update2-02
> .noarch.rpm
> -rw-r----- 1 admin shared 209023 Mar 12 22:20
> xinetd-2.3.7-4.7x.i386.r
> pm
> [root@test update2]# rpm -Uvh --replacepkgs *.rpm
> Preparing...
> ########################################### [100%]
> 1:e-smith-mailfront
> ########################################### [ 7%]
> 2:flexbackup
> ########################################### [ 14%]
> 3:initscripts
> ########################################### [ 21%]
> 4:nut-client
> ########################################### [ 28%]
> 5:nut
> ########################################### [ 35%]
> 6:e-smith-nutUPS
> ########################################### [ 42%]
> 7:ppp
> ########################################### [ 50%]
> 8:xinetd
> ########################################### [ 57%]
> 9:e-smith-base
> ########################################### [ 64%]
> 10:e-smith-backup
> ########################################### [ 71%]
> 11:e-smith-hosts
> ########################################### [ 78%]
> 12:e-smith-locale-fr_CA
> ########################################### [ 85%]
> 13:e-smith-wu-imap
> ########################################### [ 92%]
> [root@test update2]# /sbin/e-smith/signal-event post-upgrade
> [root@test update2]# /sbin/e-smith/signal-event reboot
>
> Ie; dnld'd all of the updates to some directory (I saved 'em
> to /root/update2) and then issued the 3 commands as shown
> above. This is correct??
>
> I think that I have read that some folks have been having
> issues with webmail not being available afterwards? yes/no?
> Any other known issues, or should I just be able to run this
> against the live box and life will be grand?
>
> TIA....
>
> -=- jd -=-
4 Replies
402 Views