I am running an old beast of a HP Netserver LH II dual PII 233 with 2 scsi controllers each with 3 drives on. 3 x 4.26GB & 3 x 9.10GB. From what I can gather SME has taken the 1st 2 x 4.26GB drives and mirrored them. Could someone point me in the direction of a good howto or pass some advice on how to format and stripe the 3 x 9.10GB and mount them as /home
Thanks
James
Some info from dmesg regarding the controllers & drives:
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.6
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.6
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
Vendor: HP Model: 4.26GB B 80-0854 Rev: 0854
Type: Direct-Access ANSI SCSI revision: 02
Vendor: HP Model: 4.26GB B 80-0854 Rev: 0854
Type: Direct-Access ANSI SCSI revision: 02
Vendor: HP Model: 4.26GB B 80-0854 Rev: 0854
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SONY Model: CD-ROM CDU-415 Rev: 1.1n
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HP Model: C1533A Rev: A907
Type: Sequential-Access ANSI SCSI revision: 02
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
scsi0:A:1:0: Tagged Queuing enabled. Depth 253
scsi0:A:3:0: Tagged Queuing enabled. Depth 253
Vendor: HP Model: 9.10GB A 80-S94C Rev: S94C
Type: Direct-Access ANSI SCSI revision: 02
Vendor: HP Model: 9.10GB A 80-1226 Rev:
Type: Direct-Access ANSI SCSI revision: 02
Vendor: HP Model: 9.10GB A 80-SA40 Rev: SA40
Type: Direct-Access ANSI SCSI revision: 02
1 Replies
407 Views