Koozali.org: home of the SME Server

Obsolete Releases => SME Server 7.x => Topic started by: LucLenaerts on August 27, 2007, 04:13:25 PM

Title: USB disk - LaCIE 500 GB
Post by: LucLenaerts on August 27, 2007, 04:13:25 PM

I have the following strange problem when I connect a external USB disk (Lacie 500 GB) on a SME 7.2 server (Dell 1800):

When I plug in the drive for the first time, it doesn't work and logs this in /var/log/messages:

Quote

Aug 27 15:35:12 xxxx kernel: usb 1-6: new high speed USB device using address 9
Aug 27 15:35:13 xxxx kernel: usb-storage: probe of 1-6:1.0 failed with error -1

After unplugging the drive and plugging it in again, I see this in the log:

Quote

Aug 27 15:39:49 xxxx kernel: usb 1-6: USB disconnect, address 9
Aug 27 15:39:55 xxxx kernel: usb 1-6: new high speed USB device using address 10
Aug 27 15:39:56 xxxx kernel: scsi7 : SCSI emulation for USB Mass Storage devices
Aug 27 15:39:56 xxxx kernel:   Vendor: SAMSUNG   Model: HD501LJ           Rev: 0-10
Aug 27 15:39:56 xxxx kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
Aug 27 15:39:56 xxxx kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
Aug 27 15:39:56 xxxx kernel: sdb: assuming drive cache: write through
Aug 27 15:39:56 xxxx kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
Aug 27 15:39:56 xxxx kernel: sdb: assuming drive cache: write through
Aug 27 15:39:56 xxxx kernel:  sdb: sdb1 sdb2
Aug 27 15:39:56 xxxx kernel: Attached scsi disk sdb at scsi7, channel 0, id 0, lun 0
Aug 27 15:39:56 xxxx kernel: Attached scsi generic sg2 at scsi7, channel 0, id 0, lun 0,  type 0
Aug 27 15:39:56 xxxx kernel: USB Mass Storage device found at 10
Aug 27 15:39:56 xxxx scsi.agent[30201]: disk at /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host7/target7:0:0/7:0:0:0
Aug 27 15:39:56 xxxx fstab-sync[30332]: added mount point /media/FAT32 for /dev/sdb1
Aug 27 15:39:56 xxxx fstab-sync[30334]: added mount point /media/usbdisk for /dev/sdb2
Aug 27 15:40:15 xxxx kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended

and now everything works. The drive can be mounted on /media/usbdisk and just works fine.

Has anyone experienced the same problem, perhaps with other usb disks?
I can't find why the drive has to be plugged in twice to get it working.
Any ideas?

Luc

Title: Re: USB disk - LaCIE 500 GB
Post by: kevinb on September 20, 2007, 05:13:45 PM

Yes, I have it too.

Quote

usb-storage: probe of 1-3:1.0 failed with error -1

Did you find a solution?


Kevin

Title: Re: USB disk - LaCIE 500 GB
Post by: chris burnat on September 21, 2007, 01:07:02 AM

Please report this issue to the Bugtracker. Two similar observations suggest a Bug.  Porvide detail of your system, including logs, as you have done in this post. It will be appreciated.
Thanks. chris.

Title: Re: USB disk - LaCIE 500 GB
Post by: LucLenaerts on September 21, 2007, 08:26:26 AM

kevin,

No, still no solution. I have tested it again today and have the same problem on 2 servers. They both run 7.2 with the latest patches.

burnat,
Thanks for the suggestion. I will log this in the bugtracker.

Luc

Title: Re: USB disk - LaCIE 500 GB
Post by: chris burnat on September 21, 2007, 10:29:07 AM

Quote from: kevinb on September 20, 2007, 05:13:45 PM

Yes, I have it too.

Keven, a Bug report #3407 has been entered in Bugzilla about this issue.  Would you please provide detail of your hardware as a post to this Bug, it may help.  Thanks. chris